asc used for sale

Lippert rising falling Incline belt conveyor GF 800+10500+2730-750-600 RA2132 Technical data: Conveyor length (NL): 14030 mm ( 800 mm forward run + 10500 mm ascending belt + 2730 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 14030 ( 800 + 10500 + 2730 ) Nominal / outside width in mm: 750 ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Artec Spider 3D scanner in very good condition with accessories (power supply, USB cable). A license for the Artec-Studio software must be purchased through Artec. A transfer of the previous license is not possible., machine operating hours: unknown, 3d resolution up to: 0.5mm, 3d point accuracy, up to: 0.1mm, 3d accuracy over distance, up to: 0.03% over 100 cm, Warm-up time to achieve maximum accuracy: No warm-up time necessary, Colors: 24 bpp, color: 24 bpp, color resolution: 1.3 mp, Lightsource: Flash bulb (no laser), Light source: Flash bulb (no laser), lightsource: Flash bulb (no laser), working distance: 0.4 - 1 m, Measuring field, hxw at the shortest distance: 214 × 148 mm, Measuring field, hxw greatest possible distance: 536 × 371 mm, Angled measuring field, hхb: 30 × 21°, video frame rate, up to: 16 frames/s, recording duration: 0,0002 s, data collection rate, up  ...

A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil ...

Sorting, cleaning, blanching and peeling plant for carrots and beetroot, make Komen & Kuin, Blancher capacity:, 10 tons of carrots per hour up to 80°C,, 5 tons of beetroot per hour up to 80°C,, max. throughput time: 35 minutes,, Dimensions, approx.:, Height: 3.50 m, Width: 3.20 m, Length: 8.20m, matching:, 1) Sorting machines for beetroot, celery, etc. …., Dimensions, approx.:, Height: 2.60 m, Width: 2.40 m, Length: 6.90m, Fraction 1 to 3 cm, Fraction 2 to 7.5 cm, Fraction 3 to 10 cm, Fraction 4 Overflow, 2) washing machines, Washing machine 1: drum diameter approx. 80 cm,, Distance between the bars about 5 mm,, Length drum approx. 200 cm, Washing machine 2: drum diameter approx. 90 cm,, Distance between the bars about 10 mm, Length drum approx. 300 cm, 3) Stoner, 4) heat exchanger, 5) various ascending belts, 6) Read tape, 7) different pipes, 8) Different pumps

Used radial drilling machine Int. Art. Ref. m3531 Manufacturer: BREDA Type R45-1210 Drilling performance - solid, steel 45 mm - solid, cast 55 mm Drilling with reduced feed rate - Steel 50 mm - Cast 65 mm Drilling - Steel 70 mm - Cast 90 mm Boring - Steel 80 mm - Casting 100 mm Tapping, ascending winches - Steel 40 mm - Cast 50 mm Tapping, fine threading - Steel 45x1.5 - Casting 55x2 Quill diameter 76 mm Quill stroke 280 mm Morse Cone MK 5 Speeds 12 Feeds 4 Usable projection 1,200 mm Max. swivel radius 1,350 mm Min. swivel radius 410 mm Drill head travel 940 mm Distance from the drilling spindle to the base plate max. 1,420 mm min. 535 mm Vertical boom travel 600 mm Diameter of the column 280 mm Total power approx. 6 hp Machine weight approx. 2.1 t Total weight with 2 cubes and cabinet approx. 3,000 kg Instructions available Loc ...

Description: Item never been used Working height: 9000 mm. Platform height: 7000 mm Load capacity: 500 kg. Platform dimensions: 2100x830 mm. Climbing speed: 4-6 min (ascending) , Road support scissors: 120x60x3,75 mm Hydraulic oil cylinder: Diameter80x1 mm Hydraulic oil pump Lifting power with electric motor : 1.1kw , Manual displacement Solid wheels. The item that is delivered is NOT the one shown in the photographs, but an identical one. Approx. Onsite Dimension. (l x w x h): 2,250 x 1,000 x 2,250 mm, weight approx.: 900 kg

Description: Item never been used Working height: 9000 mm. Platform height: 7000 mm Load capacity: 500 kg. Platform dimensions: 2100x830 mm. Climbing speed: 4-6 min (ascending) , Road support scissors: 120x60x3,75 mm Hydraulic oil cylinder: Diameter80x1 mm Hydraulic oil pump Lifting power with electric motor : 1.1kw , Manual displacement Solid wheels. The item that is delivered is NOT the one shown in the photographs, but an identical one. Approx. Onsite Dimension. (l x w x h): 2,250 x 1,000 x 2,250 mm, weight approx.: 900 kg

ID3275 Shore Belt Plant/Conveyor System year approx. 1995-2000? Approx. 470 m conveyor belt system, with covers, off-road, ascending with roadway crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active working time approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, discharge station with railing and walkway, drive power 18.5kW approx. 470 m land conveyor system, with covers, following the terrain, ascending with road crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active service life approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, dischar ...

Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used ...

There are 7x Roller Mills Golfetto GLCO, 2x sifters, 14x rotary valves, 2x two-rotary valve benches, 2x five-rotary valve benches, the corresponding separators, 2x bran centrifuges, a flour vibro, 1x flour collecting screw, various fine impact mills, 1x grain tipping scale and 2x micro dosing units for ascorbin and malt addition, with some spare rollers for the roller mills, spare sieves for the sifter and flour vibro, have been maintained regularly.