as used for sale

FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...

Suction capacity: 2900 m3/h Engine power: 1,1 KW, 400V, 50 Hz, S1-chip bag contents: 200 l Connection: 1x140mm WJ-ASA-7

see photos, 2 stubs

Drive system: SIEMENS DS - engine 55 kW,. average rotor diameter: 800 mm Rotation: 3,000 rpm Tools: 96 PCs Grinding gap: 8 - 0.5 mm Air volume: 3,000-3,700 m m²/h Total weight: 2,500 kg Engine data: 55 kW, 3.000 rpm, 400 V, 50 Hz, IP 54 Dimensions approx.: 2,350 X 1,400 X 1,200 (L X W X H) Usage area: Grinding of grain sizes approx. 20-250 µm in 2004, the storage and the engine were renovated and converted the plant to circulating oil lubrication with oil pump and accessories.

Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.

Kaeser Compressor package: - Kaeser CS75, 1992 year - 1 pcs. - Kaeser AS35, 1983-1992 year - 6 pcs. - Kaeser SK18, 1981-1982 year - 2 pcs. - Kaeser BS50, 1993 year - 1 pcs. - Kaeser SK25, 1987 year - 1 pcs. all operating in good condition.

2,57:1

2,91:1

Ford cardboard stitching machine; good condition; Long sleeve; suitable for flat wire; 380 volts; Exit via foot switch.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

M. No.: 2277

22/33 kW, AC-Servomotor 2AD132D-B35OB2-AS03-A2N1 2piece Bosch Rexroth

Capacity: 40-60 t/h working width: 800 mm Last picture is only demo!

with membrane conveying

Used Kiener Skinetta ASK 450 Overwrap / bundle machine Manufacturer: Kiener Skinetta GmbH ( Germany ) Type: ASK 450 Year: -83 / -89 Control panel Multi-tier Speed: up to 25 cycles / min. Leaflet feeding unit Infeed conveyor: 1200 mm x 180 mm Steel rod conveyor 1000 mm x 450 mm Film width: 40 - 450 mm Film material: PE,PP Sealing width: max 450 mm Sealing height: max 290 mm Power: 380 v., 5 kW Air: 6 bar Heat blower 4 pcs Overall dimensions: 1300 mm x 110 mm x 1900 mm Weight: 300 kg

Qty. 1 Second-hand wire cage welding machine – very good condition Mfc.: Züblin Type: ASMS 30 200 Built: 1985 Machine for production of wire cages within the range of diameters between 300-2250 mm. Wire cage dia.: 300 – 2250 mm Dia. of longitudinal wire: 5 – 7 mm Number of longitudinal wires: 12 Diameter of ring wire: 5 – 9 mm Grade of ring wires: 35 – 165 mm Longitudinal wire – speed:0.3-3.0 m/min.

Schmidt Tempo ASG 2000 Saw blade grinding machine up to 2,050 mm technically overhauled and repainted in 2019. Equipment and accessories: â?¢ Saw blade holder of 250 mm with centering bolt 32 mm, hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ Centering rings bore 32 mm, outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm Diameter, 32 mm bore â?¢ Large working light â?¢ Interchangeable wheel scissors with interchangeable wheels for need. Tooth numbers Technical data: â?¢ Grinding range 315-2050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm â?¢ Saw blade thickness maximum 20 mm â?¢ Stroke numbers continuously 21-126 Z/min â?¢ Connection value approx. 4.5 kW (400V / 50 Hz)

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

Schmidt Tempo ASG 1400 Saw blade grinding machine up to 1,400 mm Overhauled and repainted â?¢ Saw blade holder of 250 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 1 set of centering rings â?¢ 1 pc. grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large halogen lamp, good illumination, reduced heat formation â?¢ New, up-to-date control panel â?¢ Connection to central dust extraction â?¢ Interchangeable wheel scissors with the required interchangeable wheels for common number of teeth

KAESER ASD37 used machine, ready to work power: 22 kW volume flow: 3,13 m3/min pressure max: 11 bar 2005 year

HOLZKRAFT raw air extraction system ASA 1901 Product name: Raw air extraction system ASA 1901 Manufacturer: Holzkraft Item number: 5128191 Condition: As good as new technical details: • Filter area: 1.92 sqm • Rated power: 1,900 cbm/h • Chip collection volume: 110 l • Chip bag: PVC d= 414 mm Length x 1,100 mm Width/depth approx. 650 mm • Diameter intake manifold on the device: 203 mm • Diameter intake manifold at the distributor: 1 x 120 mm, 1 x 100 mm • Height filter cartridge: 2,100 mm • Sound pressure level: 85.7 dB(A) Hints: • The system is suitable for milling, planing and sawdust, but not for dust! • By rotating the intake unit by 180°, the suction direction can be done from above or below. This requires light conversion work. Engine data: • Motor power: 1.5 kW • Speed: 2,950 rpm • Power supply ...

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

Used fluid packing machine in foil bags made by Unipak, type ASG 3T.

With built-in compressed air refrigerant dryer. Refrigerant R 134a. With Sigma control 2. According to previous owner machine has about 17229 h (not confirmed by us as compressor is unchecked).

40m3 storage tank for AHL/ASL - steel tank used storage container 40,000 litres capacity for storage of liquid fertilizer / AHL / ASL with brand-new plastic inner shell The container corresponds to DIN 6616, has 2 saddle feet, an ascent ladder and is professionally emptied and cleaned inside. D = 2.50 m - L = approx. 8.70 m. The container receives a brand new plastic inner shell - resistant to the storage of liquid fertilizers - incl. leak warning device mounted in the protective box - see sample photo. The inner plastic sleeve has a "General Building Supervision Approval" and is therefore used for the storage of liquid fertilizer AHL nox reducing agent AUS 32 (AdBlue). The container is completely ground on the outside, re-primed and repainted in desired colour according to RAL. The price is ex works - freely charged. Delivery time = by arrangement.  ...

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Specific Details Industry:pharmaceutical, cosmetics, nutraceutical, food, others Number of cartons:70 /min Length of carton (min):60 mm Length of carton (max):210 mm Width of the carton (min):20 mm Width of the carton (max):125 mm Height of the carton (min):15 mm Height of the carton (max):80 mm Motion:intermittent Leaflet device:Yes

Description Compressor system consisting of: 1 Kaeser ASK 35 approx. 65,000 operating hours in full maintenance Power 22 KW 11 Bar Volume flow 2940L/min. 1 Oil separator 1 Refrigeration dryer

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

A rinser of the brand ICS is offered for rinsing the bottles before bottling. Rinser has 40 grippers Power: 12,000 fl/h Pitch: 125 mm Built in 2002 Control : Siemens 7 If you have any further questions, please do not hesitate to contact us

wire diameter 0,3-1,5mm spring diameter 15 mm feeding length 4090 mm output pieces/min 52

Longitudinal stroke X 11,000 mm Vertical stroke W 3,000 mm Vertical stroke Z 1,000 mm Transverse stroke Y 4,600 mm Work progress 3,000 mm/min Fast forwards 8,000/10,000 Maximum thrust on x-axes 30,000 N Maximum thrust on the Y 20,000 N axes Maximum thrust on Z 20,000 N Spindle engine power 71 kW Constant torque spindle speed range 0-58 g/min Spindle speed range at constant power 58-518 g/min Maximum spindle torque (intermittent service S6) 10,000 Nm Power voltage 400 Vac Power frequency 50 Hz Absorbed current 150 A Total installed power 125(170) kW

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated working voltage: 400V, Rated insulation Voltage: 1000V, Rated Current 1250A 50/60HZ; Gross weight [kg]: 150

Rated working voltage: 400V, Rated insulation Voltage: 1000V, Rated Current 2000A 50/60HZ; Gross weight [kg]: 150

Rated working voltage: 400V, Rated insulation Voltage: 1000V, Rated Current 800A 50/60HZ; Gross weight [kg]: 150

Rated working voltage: 400V, Rated insulation Voltage: 1000V, Rated Current 2500A 50/60HZ; Gross weight [kg]: 150

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll diam. toproll: 140 mm min. dia.: 210 mm engine output: 2,2 kW turning speeds: 5,7 U/min weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Upper beam can be swiveled out - Conical bending device - foot switch - self-braking main engine - CE mark / declaration of conformity including special equipment: - Motorized rear roller adjustment - hardened rollers - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1530 kg range L-W-H: 3220 x 1200 x 900 mm Furnishing: - Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety line - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers,  ...

Main spindle drive, 2AD132D-B05OB2-AS03-B2N1, R911238179, Rexroth, refurbished-mint condition Special price Used and overhauled! The part was purchased from a spare parts warehouse of a company. The main spindle was completely reconditioned by Bosch Rexroth and is therefore in a mint condition. - Asynchronous motor, main spindle drive - Power: 22 - 33 KW - 380V / 3 pol. - 1500 - 7500 rpm - 140 Nm - 54 A - 162 kg Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Alsafe Aseptic Tank 12000 Litre Item #: Usm-140 Category Aseptic Tanks Tetra Pak Aseptic tank 12000 L for sale Model : Tetra Alsafe Year of Manufactring 2010 Condition: excellent

1 of used feeder system with vertical delivery, make Pfankuch, type ASB-175 KR (control unit right), with VS 2000 controller, new 1999, product width min/max 47/105 mm, product height min/max 55/300 mm, speed max. 115 m/min (depending on product). Mulitvoltage 90-240V, 50-60Hz, 0.4 KW. Servo driven. Last used to feed coupons 95 x 74 mm at a speed of 120 coupons/minute.