We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used burn-in tunnel kiln for drying or burning products made of glass, ceramics or similar things. A total of up to 8 ovens are for sale. The belt furnaces were installed in a system for the glass foam (foam shading) production and were in use until the demo days of the complete plant. We also continue to have components of the plant, such as mills, mixers, silos, and conveyor technology. Manufacturer: MUT GmbH Jena Type: BDO 100-150 Built: 2003 Max Temp. 1100°C Connection value: 315 kW Control SIEMENS S7 -300 Length approx. 14 m Internal dimensions: approx. 300 x 1000 mm The ovens can also be used for tempering, glazing, sintering, blowing, drying and cooling of powdery or chunky goods.
used
Due to bankruptcy custommer cancellation, we sell a pallet shelf system from BITO, who is immediately available. Total pallet places available uot to 2.100 pallet places. The price here is for following combination: 60 x shelf fields with each 3 x beam pairs 3600 x 120 x 50mm Height of the frames 6.600mm. Depth 900 or 1100mm Total quantity: 70 pieces of frames 6600x1100mm, galvanized, dismantled 360 pieces of beams 3600 x 120 x 50, compartment 2.000 kg, Virgin Blue painted More and smaller quantities possible. Please enquire Mr. Rössler / LHS GmbH
used
Used low-pressure flame pipe boiler from LOOS from Gunzenhausen in good condition. The plant was in operation until the demo days and was shut down due to general plant changeover. Manufacturer LOOS Gunzenhausen Type: UN-D 2600 53.0 m2 x 1 bar Built in 1999 Ab. Steam generation 3200 kg / h Ab. Pressure 1 bar Water content 2560 l Brenner Weisshaupt Type L7T Heating oil burner Power 320 - 1957 kW Used last TÜV exam 2018 Dimensions: 4000 x 1900 x 2400 mm Also visit our website. We have a wide range of products in stock for the industry. A visit is worthwhile. The information about our company and the link to our website can be found in the dealer list under Brand GmbH.
used
Edge glue machine HolzHer express 1437 Glue, caps, flush milling, RADIUS milling / Beveling, scraping, cutting tool for rolling edges Total revision 10 years ago everything top Year of construction 1989 L x W x H: 500 x 120 x 170 cm Weight approx. 1800 kg The machine is in top shape, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...
used
Caterpillar engine C12 # BDL... an overhault,exchange engine with original CAT parts incl.turbo,sensors,controller,without starter+altenator Other CAT engines/parts from stock immediately available request Contact: MIW GmbH North-West-Ring 8 D-27404 Zeven/Germany Info@miw-Zeven.de phone: 0049(0) 4281-950583
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...
used
Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version of mobile compact system Fuse 16 Ampere Special accessories trolley Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece ...
used
Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...
used
Jaw Crusher Baioni BS 105 incl. spare parts (without JAWS) Only 900 hours of operation since replacing bearings Total1960 hours of operation Masch for normal stone. No. 1917 Year 2009 intake opening 1050 x 340 mm Minimum gap width 30 mm Maximum gap width 77 mm 55 kW Weight approx. 9'900 kg V-belt protection The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!
used
Centrifugal deposition Hydro Zyclone Liquid Particle Separator Hydro Cyclean HC5/HCH5 used Hydrocyclone Gravity-Water-Particle Separator Cyclone Water filter Water cleaner Watercleaner For separating heavier, larger particles in liquids or sludges. Was used to separate particles from washed-up pappier & cardboard solids. Price per pc3 3 x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB5B.40 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11837 (EQ.Nr 11GE01/1st stage) 1x Masch.Nr: 11836 (EQ.Nr 11GE01/1st stage) 1x available Manufacturer: SULZER-ESCHER WYSS GmbH Type: HC5-TB6B.48 Y.O.M.: 1993 Main pipes dN400 1x Masch.Nr: 11835 (EQ.Nr 11GE02/2nd stage) Cyclone & Distribution Material: Plastic Frame & Pipe Material: Stainless Steel Size Total approx.: 6200 x 1100 x 2800 mm Weight each approx.: 2.5 to T ...
used
Cooling screw trough screw double-walled heated or coolable used Manufacturer: BARL Maschinenbau GmbH Type: KT0803F17T50 Built: 2015 Total dimensions of the trough screw approx. 9.5 x 1.3 x 1.6 m Trough length approx. 8000 mm Trough width outside approx. 450 mm Trough depth approx. 600 mm Conveyor length approx. 7000 mm partly double-walled and can be heated or cooled with water Steel screw with cooled shaft Spiral thickness approx. 8 mm Diameter approx. 400 mm Spiral height approx. 100 mm Slope approx. 160 mm Shaft approx. 200 mm geared motor 1.5 kW 6.8 rpm 220/380 V substructure Steel construction approx. 11 x 2.5 x 0.2 m Total dimensions: approx. 11 x 2.5 x 2 m Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
new
Vertical turret lathe FKD 40 CNC with Y-axis and CNC Rotary milling head (A-axis) Faceplate diameter 4000 mm Turning diameter: 8000 mm Turning height: 3000 mm Slide cross section: 300 mm x 300 mm Stroke: 3000mm X-axis: travel 5000 mm Z axis: travel 2000 mm Y-axis: travel 6000 mm W-axis: stroke 1500 mm C-axis in face plate table A-axis milling head Control: Siemens 840 DSL Tool changers: 60 seats PickUp station: 5 places
new
- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
- (H) Mr President, I would like to OCEAN TECH - only the hydraulic module OCTACC 400-600 M.T.A. S.p.A. the hydraulic module OCTACC 400-600 is an external hydraulic kit with frame and housing and suitable for external control (release) and external processing of fault messages. It includes pump and storage tank. In addition to the pump and tank, all hydraulic kits have the following components: • Membrane expansion vessel • Vent valve • Safety valve • Emptying tap • Filling kit with manometer Hydraulic kit as external component for HOCT 400 / 500 / 600 Pump type P1 Number of pumps 1 Rated power per pump kW 4.0 Available print ext. Bar 1.0 - 2.0 Flow rate m3/h 5.9 - 56 Execution external Tank capacity l 350 Length hydraulic kit mm 1950 Wide hydraulic kit mm 785 Height hydraulic kit mm 1200 Serial number: 2200325782 Built in 2018 Condition: Optical ...
used
used
Extruder KE 90 x 30-D for manufacturing of von TPE foam and compact profiles screw diameter: 90 mm L/D ratio 30:1 (2700mm) extruder with 11 temperature-controlled zones (electrically heated by fluids) Siemens electric drive, motor 45kW at 2500rpm year of construction 1996, machine in very good condition (preliminary used in test operations) melt application device (gear pump) double profil head (also used for extrusion-coaded framework belts) electric equipment partially available extruder mounted on movable baseplate
used
used
Strapex apparatus Plastic band seals L x W x H: 80 x 40 x 100 cm Weight approx. 70 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
used
used
used
used
used
Kettenstemmer Müller Wall mounting L x W x H: 60 x 40 x 170 cm Weight approx. 270 kg Built in 1973 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance
used
used
MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...
used
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Set of 2 unused Duechting type MC 50-315 D pumps, manufactured in 2014. Düchting Pumpen Maschinenfabrik GmbH & Co. KG Q 20 m³/h H 21.8 m N 1140 1/min P 4.1 kW T 70 °C Rho 1400 kg/m³ TYPE MC Horizontal single-stage centrifugal pump in back pullout design. • Pumping of abrasive and corrosive liquids • All components which are in contact with the liquid are made of SICcast • Suction flange: Axial • Discharge flange: Top (Vertical) • Closed impeller with three-dimensionally curved vanes • Impeller is key driven; reverse rotation (e.g. back-flushing) is possible • Re-adjustable inclined gap between impeller and volute casing to optimize the efficiency and differential pressure after longer operation • Single acting, metal free mechanical seal DÜTEC with springs located outside of the liquid (other seal types available) • Oil-lubricated antifriction ...
used
Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
new
Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany
used
machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Machine type water circulation cooling unit Merkle brand Type WK 370 Plant No. 38.118 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 700 x 370 x 285 mm Weight 28 kg Age approx. 10 years Condition workshop tested very good Warranty 12 months from the date of delivery Original price 1.200,00 € + VAT Price 675,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our ...
new
Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany
used
Machine type water circulation cooling unit Merkle brand Type WK 230 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 610 x 230 x 215 mm Weight 18 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you ...
new
Round table with C-axis and Y-axis FKD 40: Faceplate diameter 4000mm Y-axis traverse path: 6000mm Load capacity 50 to Max. Speed 120rpm with shifting-gearbox Stoeber Master-Slave-embracing on C-axis and on Y-axis, 2 Siemens motors each 60 KW (C-axis), 2 Siemensmotoren (Y-axis) Speed 1st stage 0-20rpm, 180000 Nm Speed 2nd stage 0-120rpm, 45000 Nm Oil lubrication, Hydrostatic bearing Dimensions: Length: 11000 mm, width: 4000 mm, height: 1200 mm Mass 35 t. Maintenance free, Manufactured in Germany
used
Machine type water circulation cooling unit Merkle brand Type WK 200 Connection voltage 1 x 230 Volt Connection 6-pin Harting plug Water pressure 3.5 bar Water connection 2 quick-release couplings Water tank 3 ltr. Content Dimensions L x W x H 590 x 200 x 210 mm Weight 15 kg Age 8 years Condition workshop checked as new Warranty 12 months from the date of delivery Original price 990,00 € + VAT Price 590,00 € + VAT ___________________________________________________________ The machine is located in the Wilhelm Merkle Schweisstechnik GmbH Anton-Böck-Strasse 31 81249 Munich, 81249 Contact person is Mr. Manuel Maier. Of course, we will send the machine to you for 60, - € by forwarding agent throughout Germany. ____________________________________________________________ You can also finance our machine with 0%! We offer you ...
new
Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock ...
used
Filter system for ref. No. 235-1659 with bagging device for big bags L x W x H: 500 x 200 x 600 x cm Weight 2300 kg Built in 1999 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...
new
Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 ...
used
The STOCK LM 1235 / 1250P litho laminating machine was manufactured in 1995 by the German company Stock Maschinenbau GmbH. The laminator is used for wrapping cardboard with thin paper in order to obtain a decorative, aesthetic packaging. Labels with a format (length x height) of 250 x 250 mm are glued on cardboard sheets with a maximum width of 1250 mm and a length of 1235 mm. The LM 1235-1250P litho laminating machine is equipped with: pressure roller, sensor for detecting and registering the stuck label, or the gluing unit with automatic glue supply. Technical data of the STOCK LM 1235.1250P litho laminating machine - lamination length: 1235 mm - laminating width: 1250 mm - label format (length x height): 250 x 250 mm - semi-automatic machine with a label dispenser - manual label feeding table - single sheet - gluing unit with automatic glue supply - sensor for detecting and ...
used
4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
This electrically driven sinusoidal table has an incremental angle measuring device (Heidenhain RON 705). -Sinusoidal table for workpiece clamping -Swivel range 0 - 110° -Clamping surface 800 x 600 mm -Groove width 22 mm -Groove spacing 100 mm -Number of grooves:6 pieces -Dimensions: Length: 840 mm Width: 760 mm Height: 220 mm Clamping angle, clamping angle, clamping tower, clamping device, About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization
used
Planer blade sharpening machine Meinert with built-in Cabinet apparatus for gang saws weight approx. 350 kg Built in 1963 L x W x H 80 x 60 x 140 cm The machine is in good condition, ready to use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centering bore: 100 H6 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm The displacement measurement is carried out via a rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overha ...
used
Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Manufacturer: Rückle Type: PKT 1000 Clamping area: 1400 mm x 1400 mm Total height: 319 mm Clamping grooves: 7 pieces Slot dimensions: 22 H7 mm Slot spacing: 160 mm Centering bore: 140 H6 mm Condition: Very good (used) Optional with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization