137,066 used machines on RESALE, but how to find them? Machine Search
Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...
Auction-ID: A3-46114-12570
On 2 pallets Auction-ID: A1-51062-404
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: Genie, Superlift Contractor SLC-18 -Load capacity: max. 295 kg -Lifting height: max 5.1 m -Techn. Data: see photos -Equipment: with winch, with standard fork -Dimensions: 1880/800/H2170 mm -Own weight: 151 kg
Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M 090-31 -Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg
Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg
Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg
F20 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa
F24 BOILER : ORGANIC HEAT TRANSFER MATERIAL HEATER ORIGIN : CHINA RATE CALORIFIC POWER : 3500KW MAWP : 1.0MPa MAX. WORKING TEMP. : 320°C ALL UP WEIGHT : 19.5t HYDARULIC TEST PRESSURE : 1.5MPa
Safety cabinet, hazardous materials cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet, hazardous materials cabinet, safety cabinet -Manufacturer: asecos, hazardous materials cabinet, safety cabinet -Design: With 3 shelves, drip tray, transport base -Technical data: see photos -Dimensions: WDH 1200/640/H1970 mm -Transport weight: 276 kg
Sell MUBEA profile shears with hole punch, Profile shears for angle, square, round, and flat steel with notching device.By hand and Foot trigger. Machine is in very good condition Condition. Cutting force 350kN. Cutting force for Sheet metal 150x13mm, hole punch 28mm in 10pcs Sheet metal, angle steel up to 90x8, round steel up to 30mm, square steel up to 24mm (steel up to 400N /mm). For this purpose, various Hole and slotted hole stamp.
: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 € : 114.49 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad wa ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 20 - 76,1 mm : 3 mm : 2.5 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 € : 3/4 26,9 mm, 1 33,7 mm, mm : 3 mm : 2.5 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 € : 1 1/4 42,4, 1 1/2 48,3 mm : 3 mm : 2.5 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 € : 1 1/2 48,3 mm, 2 60,3 m mm : 3 mm : 2.5 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DAXNER Pneumatic conveying system for coffee / bulk materials – complete – year of construction 2012 For sale is a high-quality and fully equipped pneumatic conveying system from the manufacturer DAXNER, specially designed for the gentle conveying of coffee and similar bulk materials. Technical data: Manufacturer: DAXNER (Austria) Year of construction: 2012 Flow rate: approx. 900 kg/h Conveying type: pneumatic (side channel blower) Product: coffee / light bulk materials Operation: continuous Scope of delivery: Side channel blower Receiver container / separator Valves and control system Complete, functional system Special features: Very gentle conveying (ideal for sensitive products such as coffee) Low-dust / closed conveying Robust industrial design Immediately ready for use Condition: Used, Viewing possible by arrangement. Further information and pictures are ...
including Fabory; including stainless steel; bolts; nuts; washer; including 13x galvanized steel filled storage bins; including pallet box; Auction-ID: A1-50476-237
Mobile metal rack, washers, bolts and nuts Auction-ID: A1-50476-332
including stainless steel fittings; plastic cable glands; including pallet box; Auction-ID: A1-50476-217
Consisting of 2 parts: 1400mm wide and 1650mm wide; Various types and sizes of sheet material. Auction-ID: A1-50476-122
Pallet mounting material (872kg total) incl pallet Auction-ID: A1-50936-49
Approx. 70 pieces (total number not counted) Diagonal bracing with scaffolding platform 6x platform 2570mm and 20x 3070mm 630 wide Auction-ID: A1-47450-401
Equipped with: Fuchs RHL 350, year of manufacture: 2003, serial number: 3502500039, operating hours: 8,182 hours, own weight: 39,500 kg, engine Deutz BF6M 1013 EC, 6-cylinder diesel engine, power: 193 hp, widening tracks from 3.00 m to 3.80 m, liftable cab with visibility height up to 5.60 m, central lubrication, magnetic system, air conditioning, arm length: 7.40 m, handle length: 5.80 m, transport dimensions, length: 12.00 m, Width: 3.00 m, height: 3.25 m, machine is in working order and is equipped for handling and recycling operations. Auction-ID: A1-47395-2240
Material rack with batch of stainless steel, aluminium and steel profiles – 2800 × 1400 × 2200 mm Specifications: Steel material racking / long material racking Dimensions of shelving: approx. 2800 × 1400 × 2200 mm Equipped with 6 support/upright sections Multiple storage levels for long material Including full metal stock Various stainless steel round tubes Ø18 mm Approx. 30 stainless steel round tubes Ø25 mm Various tubes 40 × 20 mm Various tubes 40 × 40 mm Various aluminium box sections Various round metal tubes in different diameters Various square and rectangular tubes Various bar materials and other long profiles Different lengths, diameters, wall thicknesses and designs Both short and longer pieces of equipment available Features: Large number of aluminium construction and profile pieces Various aluminium profile systems with complex cross-sect ...
# Hosokawa Solids Industrial Bulk Material Handling System – 2 × 55 m³ Storage Silos Overview Complete industrial bulk material storage, extraction and conveying installation supplied by Hosokawa Solids, designed for receiving, storing, discharging and transporting solid raw materials within an industrial process. The system comprises two vertical storage silos, each with a documented useful capacity of 55 m³, providing a combined reference capacity of 110 m³. The installation incorporates filtration equipment, pressure and vacuum safety devices, explosion venting panels, vibrating extraction systems, mechanical and pneumatic conveying components, dry-air supply equipment, valves, instrumentation, electrical controls and supporting structures. The installation is intended for the handling of bulk solid materials, with actual performance depending on the material's bulk ...
Contents 3 plastic bins with, among other things. Bolts and rondelles Auction-ID: A1-50864-137
Aesculap GB266M – Craniotome Rotary Dura Mater Protector Intended for craniotomies in neurosurgery. Manufacturer: Aesculap Model: GB266M Type: Rotating dura mater protector, micro-Line system (B. Braun Aesculap) Compatibility: GB267R craniotome handpiece, GC303R bur Features: Reusable stainless steel, autoclavable Packaging: Original box Condition: New Auction-ID: A1-51275-156
Content consisting of, among others. cables ; switches; automata; level detectors; cables; wall contacts; hose connections... Auction-ID: A1-50864-130
Contents 16 plastic bins with, among others. bolts and rondelles; straps; lifting eyes; wheels... Auction-ID: A1-50864-138
Unused Engine: 224 cc 4-stroke petrol engine, cutting width: 53 cm, maximum range: Controllable up to 600 meters distance. Fuel tank: 1 litre, consumption: about 0.7 litres per hour. Maximum angle of inclination: up to 45 degrees, maximum speed: 3 km/h. Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters. Design: Robust and suitable for slopes up to 45 degrees. Ease of use: Easy operation and adjustability for optimal mowing results. Safety: incl. emergency stop and obstacle detection for safe use on steep slopes. A powerful 224 cc 4-stroke engine and a cutting width of 53 cm. Auction-ID: A1-40407-25
Diameter 100, various grit Wed: 60, 120, 200, 400, 500, 800, as well as bake up pads Auction-ID: A1-50663-1762
Consisting of: turbo disc, grinding wheel, sculpturing tip, kitchen wheel, galvanic pin Auction-ID: A1-50663-1761
In various sizes, including various supports, on 2 pallets Auction-ID: A1-50889-86
including plastic pallet box; Auction-ID: A1-50707-340
Various plates; cones; barrier posts; on 3 pallets Auction-ID: A1-50892-65
Diameter 100, various grit wo: 120, 150, 200, 800, 1500, as well as back up pads Auction-ID: A1-50663-1769
Diameter 100, various grit Wed: 120, 400, 800, 3000 Auction-ID: A1-50663-1760
Various anchors, The bolts in the floor need to be ground off, rebar and the like Auction-ID: A1-50663-1370
WCP 130 – Professional Branch Chipper • Model: WCP 130 • Machine type: Branch chipper / wood chipper • Max. wood diameter: 130 mm • Capacity: approx. 6–10 m³/h • Three-point mount: CAT I / II • PTO speed: 540 rpm Technical data: • Max. diameter: 130 mm • Height: 1,500 mm • Width: 1,320 mm • Length: 1,510 mm • Weight: approx. 220 kg • Feeding System: Gravity • Box opening: 488 x 590 mm • Filling opening: 130 x 215 mm • Hopper opening: 500 x 618 mm • Number of rotating blades: 4 • Blade thickness: 20 mm • Flywheel diameter: 630 mm • Ejector height: 1,500 mm • Rotary ejector: 360° • PTO height: 460–560 mm Equipment: • PTO shaft included • PTO drive • Height-adjustable base • Dismountable feed hopper • 360° rotatable ejector • Easy blade change due to generous funnel opening Application: ...
Contents of compartments rack consisting of various caulking guns, 2 component sealant, bolts and other fasteners Auction-ID: A1-50663-1669
Packaging material for sampling; various plastic and glass packaging; Contents 8x section of warehouse racking; with 8x rack Auction-ID: A1-50892-37
maximum number of results exceeded
please refine your search
10 € 
