135,384 used machines on RESALE, but how to find them? Machine Search
With trunk Auction-ID: A1-49187-18
With trunk Auction-ID: A1-49187-24
Without trunk Auction-ID: A1-49187-25
With trunk Auction-ID: A1-49187-21
With trunk Auction-ID: A1-49187-20
With trunk Auction-ID: A1-49187-22
With trunk Auction-ID: A1-49187-23
current intensivity: 1,2 / 0,5 A wire dia.: 0,8 - 1,6 mm IP protection class: IP 43 dimensions: 250x210x190 mm speed: 1 - 25 m/min weight: ca.7,2 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2002, voltage 230 V, power 0.45 kW Auction-ID: A1-49450-11
Broshuis E-2190/27 31N5-EU semi low loader – 6.25 m extendable – wheel arches Specifications: Brand: Broshuis Type: E-2190/27 31N5-EU Type of vehicle: semi low-loader / transport trailer Year of construction: 2003 Number of axles: 3 Axles: SAF Middle axle: lift axle Rear axle: steered Suspension: air suspension Braking system: drum brakes Tyre size: 235/75 R17.5 Tyre condition: approx. 90% Double-mounted wheels Own weight: 10.540 kg Payload: 28,460 kg Maximum permissible mass: 39,000 kg Technically permissible axle loads according to type plate: 3 × 9,000 kg Value for coupling/bearing stated on the type plate: 18,000 kg Total length retracted: approx. 13.25 m Total length extended: approx. 19.50 m Total width: approx. 2.55 m Neck height: approx. 1.45 m Overall dimensions retracted (L × W × H): approx. 13.25 × 2.55 × 1.45 m Overall dimensions extended ...
GoodWe GW80K-MT | with ARC detection Condition: unused Auction-ID: A1-46374-39
GoodWe GW80K-MT | with ARC detection Condition: unused Auction-ID: A1-46374-27
With ballast Delivery within Germany possible, at a cost 1 more Auction-ID: A1-49580-12501
With ballast Delivery within Germany possible, for a fee 1 more Auction-ID: A1-49580-12500
Material clamp, material gripper, load clampCarrying clamp, lifting clamp, block pliersManufacturer: NORDGREIF Type 7548Year of construction: 1997Load capacity: 500 kgGripping width: 280 to 420 mm- Width adjustment via trapezoidal thread with hand crank- Protective rubber coating on the gripping surfaces- For crane operation- with CE markingWeight: 50 kgGood condition; used
Set including an industrial cantilever rack, a material trolley and a large stock of metal material. The set includes different sections of profiles, tubes, flats, round bars and other materials intended for mechanical, welding, locksmithing or metal construction work. This configuration makes it possible to immediately have a reserve of material that can be used for manufacturing, maintenance or industrial subcontracting. Ideal for: Mechanical workshops locksmith Boilermaking Industrial maintenance Metal construction Construction companies The racking also allows for efficient organization of the length storage. Auction-ID: A1-48554-231
Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010
We sell a complete package from bearing resolution. Mounting material for photovoltaic systems open space The following positions are included in the package: Central Terminal profiles, end clamp profiles, potential balancing ropes, Checker Advancende DC70A cabinets (GAK passing element, fully assembled), connection profiles (profiles), solar cables. It's new product. We will send you a detailed statement you request. Price on request.
TECHNICAL SPECIFICATIONS Manufacturer: M-Tec CZ s.r.o. Description: Building material silo Type: KET 6/0.1 Year of construction: 1997 Content: 6.000 l Maximum speed. Operating overpressure: 0.1 bar Maximum speed. Operating temperature: 60°C SPECIFIC COMMENT - Good technical condition, little wear - Versatile - A total of 11 pieces available, individual sale possible TECHNICAL SPECIFICATION Manufacturer: M-Tec Description: Building material silos Type KET 6/0.1 Year of construction: 1997 Volume: 6.000 l permitted working overpressure: 0.1 bar permitted working temperature: 60°C SPECIFIC COMMENT - Good technical condition, low wear - Versatile use - In total 11 pieces available, single sale possible
Hazardous material Cabinet, Safety Cabinet Manufacturer: Düperthal Type: 2.22.925-3 DIN 12925, part 1 Dimensions: width x depth x height (approx. 120 x 60 x 193 cm) 2 door with 3 adjustable shelves without a key automatic closing small Fender Bender All information without guarantee
used
Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price
Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request
Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.
Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.
Mesutronic MN 5.1 PW50 metal check for bulk materials, etc. without integrated reject/ejection mechanism, reject/ejection time adjustable from 0.1 s to 10 s, inlet height (middle of the tube) approx. 755 mm, outlet height (middle oft he tube) approx. 450 mm, tube outer diameter approx. 32 mm, tube inner diameter approx. 28 mm, electrics 100-240V/50/60Hz, machine dimensions approx. 350 x 350 x 770 mm (LxWxH), machine net weight approx. 35 kg
Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm Travel XxYxZ: 3000x2000x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: approx. 0.015 mm Working speed: 12000 mm per minute ...
Material conveyor belt LT-400 | Inclined conveyor belt for waste loading and material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 400 mm Working length: 3000 mm Working speed: 15 m/min. Maximum head: 1950 mm Gearbox: Bonfiglioli 0,55 kWt Weight: 250 kg
Material conveyor belt LT-500 | Inclined conveyor belt for material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 500 mm Working length: 4000 mm Working speed: 15 m/min. Maximum head: 2200 mm Gearbox: Bonfiglioli 0,75 kWt Weight: 320 kg
Scissors for reinforcing steel or bars max 32mm
Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg
Bushing material, bushing material, bearing material -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: convertible, max. 6.09 m -Equipment: with winch and standard fork -Dimensions: 1700/660/H1360 mm -Own weight: 87 kg
Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Manufacturer: VEB, Material gripper type B04-Z10-1 -Load capacity: 1,000 kg -Wingspan: see photos -Dimensions: 280/190/H320 mm -Weight: 21 kg
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Manufacturer: MO Weidmann, material lift assembly lift -Load capacity: max. 225 kg -Lifting height: max 1.78 m -Equipment: with winch, with standard fork -Dimensions: 1240/690/H2230 mm -Own weight: 76 kg
Material lift, pallet truck, lift truck, assembly lift, superlift contractor, lifting lift -Material lift: assembly lift lift with cable winch -Load capacity: max. 226 kg -Lifting height: max 1.77 m -Equipment: with winch, with standard fork -Dimensions: 1700/690/H2230 mm -Own weight: 73 kg
Universal Materials Testing Machine Manufacturer: Lloyd Type LR5K MK 4 Serial No. 102894 Lloyd Instruments Sold with: -5000N Force Transducer (new) -Force transducer 250N -50N load cell -Manuals and CDs -Computer complete with screen -Software Technical configuration: -Load range: 10N - 5kN -Force measurement accuracy:
Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus
Auction-ID: A7-49302-151
Auction-ID: A7-49302-153
maximum number of results exceeded
please refine your search
250 € 
