arc furnace used for sale

Capacity: 3000 kg Production capacity: 1500 kg/h degree: 1200 °c heating capacity: 1700 kcal/KW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data unknown, total size approx. 53x42x45cm, 230Volt Auction-ID: A1-45188-183

Manufacturer : Nabertherm Model: N 875/65HA Year of Manufacture: 2015 Maximum Temperature: 650 degrees C Power Supply: 400 V / 50 Hz Current: 39 / 39 / 39 A Power Rating: 27 kW - Condition: This furnace is in like-new condition. Since arriving at the current facility in 2020, it has never been observed in operation. Employees report that it was used only two or three times at the very beginning. Find more here - / Contact us at -

type: gas-fired rotary hearth furnace with central recuperator and air preheating max. temperature: 1300°C max. furnace output: approx. 700 kg/h clear door opening (w x h): 600 x 400 mm number of burners: 6 number of control areas: 3 heating capacity: 720 kW el. total connected load: approx. 15 kVA PLC: Siemens S7

The industrial gas burner is designed for fire temperatures up to 1600 degrees Celsius and is infinitely regulated by a servo motor Transport dimensions: approx. 5100 mm long, 2800 mm wide, 3500 mm high Including: 1 x platform, 1x tipper, 1x steel table, 1 x ZPF Therm control cabinet and 1x hydraulic power unit.

Data unknown, total size approx. 53x42x45cm, 230Volt

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

El. heated chamber furnace, make VEI type: VEI_KO_EB max. temperature: 450°C connected load: 28 kVA air flow: horizontal usable dimensions (w x h x d): 600 x 500 x 2000 mm

Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW

Pizza open Middleby Marshall

High temperature debinding furnace, make GERO type: HBO 50/13-3 2G heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

El. heated chamber furnace, make VEI type: VEI_KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

Cieffe FNCm 2.5/0.8/1500 Hardening furnace Chamber furnace 1120 °C Manafacture: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 volts Year: 2000 More items - new and used - can be found in our shop! International shipping costs on request!

-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

salt bath hardening system, make: IOB almost unused with charging dimensions 800 Ø x 1200 mm heating type: gas/electric consisting of: 2 loading places 3 electrical heated pre-reheating furnaces 500°C 4 gas heated crucible furnaces 900°C 1 electrical heated thermal bath 450°C 1 electrical heated washing tank (3-fold) 1 air cooling tank 1 water drainer 2 unloading places 1 el. measuring, regulating and control system 1 evaporator 1 intermediate storage tank 1 suction 1 chimney various accessories condition good requird space: approx. 12 x 20 m

Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed

Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

Key data: 400 °C

Tempering furnace Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Height: 450 mmX Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

Qty. 1 Second-hand Aluminium Melting Furnace Mfc.: Sistem Teknik Type: SAMHF-6 Stationary Alu melting/holding furnace Built: 1/2015 Stopped in 4/2015 Recycling capacity: 5000 Ton/annum Charging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc. Natural gas 6 ton melting furnace Made in Europe CE standard of quality and pollution control Casting capacity of 20 ton of aluminium per day PLC automatic control unit including HMI system – Siemens Qty. 2 proportional control gas burners

Key data: 550 °C, 1800 mm, 2500 mm

Plasma nitriding plant consists of: 2 pcs. hot wall double-bottom hood furnace Loading: movable hoods Volume: ø1.800 x 2.500 mm Workpiece weight (max.): 4.000 kg Wall temperature (max.): 550°C Connected load (total): 325 kW 4 pcs. batch stations 1 piece cleaning system

Muffle kiln, e.g. for colour firing of ceramic overglaze paints. Make no. 15297 max. temperature °C 1000 400 Volts, 50 Hz Year of manufacture 2004, little used External dimensions H 1750, L 1760, W 1360

Offer 24460 Specifications: - Nominal / continuous temperature pre-selectable up to approx. 1150 ° - Digital temperature setting -Timer - Interior dimensions approx. W 200 x H 190 x D 350 mm - Feeding through front door - Opening width of the front door W 200 x H 190 mm - Drive 400 V / 7.5 kW - Base H 800 mm - Space requirement approx. W 900 x H 1450 x D 900 mm - Weight approx. 120 kg

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

El. heated pit furnace, make Borel with air circulator type: 11.85 temperature: max. 550°C connected load: 5 kW clear ø: 300 mm clear height: approx. 570 mm without control cabinet

XVAC 1450 furnace system Sintering furnace up to 1,450°C, XVAC series Technical data: Design type Cold wall system, top loader, retort furnace charging rack. Three substrate levels made of perforated aluminum oxide Lid procedure Manually Heating elements Molybdenum disilicide Usable space size Ø 60 mm, height 200 mm, max. temperature 1.450 °C (N2, Ar, Ar+H2) 1,400 – 1,450 °C (Vacuum) gas lines 1 The gas species Nitrogen Argon (option) Argon + max. 5 % H2 (alternatively) vacuum pump Rotary vane pump Agilent DS40M final pressure

El. heated pit furnace, make Borel type: 6-72 temperature: max. 1050°C connected load: 90 kW clear ø: 850 mm clear height: approx. 2150 mm without lid and control cabinet

Quenching of the Batch The batch is quenched by immersion in a quenching medium (oil). --------------------------------------------------------------- Dimensions and Weights Overall Dimensions (including control system): - Width: approx. 3400 mm - Height: approx. 5600 mm - of which recessed in the pit: 650 mm - Length: approx. 5500 mm - Minimum required hall height: 7000 mm - Working height above floor level: 1200 mm --------------------------------------------------------------- Base Grate Dimensions: - Width: 705 mm - Height: 50 mm - Length: 1100 mm --------------------------------------------------------------- Usable Batch Space (including base grate): - Width: 700 mm - Height: 950 mm - Length: 1100 mm - Grate loading height: 900 mm - Gross batch weight (incl. base grate): 1000 kg --------------------------------------------------------------- Oil Bath: - Oil capacity: app ...

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - / Contact us at -

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - / Contact us at -

Andouart extruder

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.