arburg press used for sale

Arburg ARB 315 B SN 48197 Leiterplatte Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 48197 The number of the Spurs: - Type: ARB 315 B Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061523

Arburg ARB 325 B SN 51221 Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 51221 The number of the Spurs: - Type: ARB 325 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061423

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Key data: 1500 kN, 40 mm

ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -

Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information.

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information.

This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information.

This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine.

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, its designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information.

This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.

This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

Ref. no.: 17540 Hersteller: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

Injection moulding machine Arburg 420C 1000-290 BJ 2007

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

Key data: 250 kN

Arburg 221KS 250-75 / Universal machine Year of Make: 1999 Injection unit: Screw diameter: 20 mm Injection weight: 26 g Spray pressure: 2350 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 221 mm Size of the clamping plates: 342x250 mm Ejector: hydraulic Clamping unit: toggle lever Control: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core train control Hardened injection unit - Bimetal Clamp for fastening the injection unit vertically Dimensions: Weight: 1150 kg Length/Width/Height: 2.63x1.34x1.93 m Drive: Pumps/motor: 5.5 kW Heating power: 4.6 kW Total power: 10.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to  ...

Arburg OK-C S350-60 / Vertical injection moulding machine with sliding table / Very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 18 mm Injection weight: 18 g Spray pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t Spar spacing: 0x0 mm Size of the clamping plates: 295x395 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Vertical Injection Molding Machine with Sliding Table 3 stations on the sliding table Air Valve x 4 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Parallel movements Infrared protective curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/Width/Height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before they are sold. It is  ...

Key data: 400 kN

Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: 1.9 ...

Key data: 400 kN

Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our compa ...

Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); Axis B and C Traversing in ax ...

Arburg 320A 500-170 with the Sprue Picker / Electric Machine Year of Make: 2005 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit : Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Hardened injection unit - Bimetal Central lubrication Machine with built-in Arburg conveyor belt and original sorting flap Dimensions: Weight: 3500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the sele ...

Key data: 500 kN

Arburg 320C 500-170 with the Wittmann W811 robot Year of manufacture: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Spray pressure: 2000 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in sorting flap Robot Wittmann W811 Year of Make: 2010 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot at an additional co ...

Key data: 500 kN

Arburg 320C 500-170 Year of Make: 2011 Injection unit: Screw diameter: 35 mm Injection weight: 105 g Spray pressure: 1470 bar Dosing volume: 115 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 320x320 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Operating hours: approx. 35,000 h in automatic mode Control with air valve Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating capacity: 9.4 kW Total power: 20.4 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...