126,698 used machines on RESALE, but how to find them? Machine Search
Hydraulic pressure switch, pneumatic pressure switch -Type: EDS 1691-NC-016-000 -Pressure: 16 bar -Operating voltage: 24-20 VDC -Signal output: 4-20 mA Price: per piece Quantity: 2 available -Weight: 1 kg
Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual
Press 400x500 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN
Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg
Pressure switch -Type: C6045D 1043 -0.2-3 mbar -220/240 VAC 50 Hz 12(2) A -Pmax: 100 mbar -Protection class: IP 40 -Quantity: 3 pieces available -Price: per piece -Weight: 1.2 kg/piece
automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m
High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.37 kW -Performance data: not available -Connection input: Ø 65 mm -Connection output: Ø 60 mm -Dimensions: 510/480/H470 mm -Weight: 49 kg
FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...
Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t
Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data
ARISA S-2-630-240-120-LD mechanical press was built in 2005 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, such as precise punching and stamping of metal parts. In addition to its standard purpose, depending on the tooling and material feed systems used, the machine can also be used as a transfer press or progressive press. All machining processes are performed with a high press force of 630 tonnes. The drive system, in the form of a flywheel and an eccentric gear, cooperating with two connecting rods, ensures even torque transmission and smooth control of the slider movement. The slider, on the other hand, is guided at eight points using roller guides, which increas ...
NIDEC ARISA S-2-500-240-120-FD mechanical press was built in 2006 in Spain by Nidec Press & Automation Co. (NP&A). It is an extremely versatile press that is used in the series production of components for the broadly defined automotive or machinery industry. It enables even the most demanding metal forming operations, i.e. precise punching and stamping of metal parts. In addition to its standard purpose, with the appropriate tooling and material feeding systems, the machine can also be used as a transfer press or progressive press. All processes are performed with a high press force of 500 tonnes. The drive system of the NIDEC ARISA S-2-500-240-120-FD press is based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution guarantees even torque transmission and a smooth working cycle. The slider, on the other hand, is guided in multiple points by rolle ...
Presto CC 30 V baler, built in 2006, in the pipeline Technical data: Manufacturer: Presto Type: CC 30 V Year of Make: 2006 Pressing force: 30 t Cycle time: 34 s Drive power: 11 kW Filling opening: 1080 x 950 mm Filling volume: 0.69 m³ Binding: 4-fold, automatic Throughput at bulk density of 35 kg/m³ - 2.0 t 60 kg/m³ - 3.2 t 100 kg/m³ - 4.8 t Bale dimensions: 700 x 950 mm Bale weight: up to 350 kg Dimensions: 3650 x 1770 x 2150 mm (LxWxH) Machine weight: approx. 3900 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s
Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm
DURMA AD-S 30175 CNC hydraulic press brake was built in 2009 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The offered machine is an excellent choice for precision machining of workpieces with a maximum length of 3050 mm. The machining process is performed with a high force of 175 tons in four numerically controlled axes (X, Y1, Y2, R). The state-of-the-art technology used makes it more precise and energy-efficient than other presses available on the market. These include, among others, the manual deflection arrow compensation function, which ensures that the desired angle is achieved along the entire length of the bent workpiece. The sturdy construction, combined with economical drives, in turn guarantees excellent bending results, even during the most intensive challenges. The positioning of the material is facilitated by front supports with T-slots and a back stop operat ...
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
Extraction system / briquetting press Extraction system 11 KW Briquetting press 7 KW
EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200PS Eco/Col - maximum press force: 175 t - maximum sheet metal length: 3550 mm - front supports - connection power: 20.5 kW - current protection: 63 A - control voltage: 24 V - power supply: 3x 400 ...
Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg
Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1100 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 110000
SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm
The filter press was revised and checked by our workshop in 2023. Machine name: Chamber filter press Manafacture: Passavant Type: AX1200 Year of construction: 1989 / 2023 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 2200 litres Procedure: Closed Filter area: Approx. 155 m2 Plates format: 1200 x 1200 mm Number of plates: 62 Panel material: Polypropylene Plate transport: Automatic Plate package length: Approx. 4200 mm Cake thickness: 30 mm Dimensions: L 7600 x W 1600 x H 2250 mm Note: Workshop revised in 2022 Accessories: A control cabinet and a hydraulic system Condition: Used good Price: On request
SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping
Press pressure up to 900 KN Hint: without ripcord
SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions
maximum number of results exceeded
please refine your search
40 € 
