arburg press used for sale

R1317 Injection moulding machine ARBURG A 221 - 250 - 55 Year of manufacture 1997 Control Multronica with handling device without hopper and water distributor converted to CF drive but without card, with operating instructions for Arburg and one for the robot Machine was freed up by the purchase of new machines. but no function check from us Price free loaded on truck € 1950.-- +VAT a viewing is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any guarantee for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Price 4.900+VAT (claimable)free loading on truck Injection molding machine Locking force 200t Distance between the spars 520 x 520mm Screws D.=50mm = Injection weight in hp 297gr. Machine very well preserved comes from medical equipment manufacturer Dissolution of injection molding department .with operating instructions and 2 discs. Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

Key data: 850 kN, 40 mm

R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x

2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996

Injection moulding machine Arburg 470C 2000-675 BJ 2007

Injection moulding machine Arburg 420S 1300-350 BJ 2000 without handling

Ref. no.: 18591 Manufacturer: ARBURG Year of construction: 2005 Clamping unit Clamping force: 160 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Opening width: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 254 cm³ Shot weight: 232 g Injection pressure: 1580 bar Measurements and weight Machine weight: 7100 kg Dimensions LxWxH part 1: 5,1 x 1,7 x 2,3 m Further information: The ARBURG 520 A series is part of the fully electric ALLROUNDER range and is known for its high precision, energy efficiency, and reliability in injection molding processes. These machines are particularly suitable for the production of technical plastic parts with high quality requirements, as well as for applications where repeatability and process stability are essential. Typical features of this ...

Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Working hours : 134.000 h

Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Hours : 138000 h

Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons   Tie-bar Spacing: (H × V): 470 mm × 470 mm   Maximum Plate Size : 650 mm × 650 mm   Minimum Mould Installation Height: 250 mm   Maximum Distance between Platen (when fully open): ~750 mm   Mould Opening Stroke : 500 mm   Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³   Approximate Shot Weight (for PS): 210 g   Injection Pressure: 1 670 bar   Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power   Heating Power: Example listing ~ 10.2 kW   Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m   Machine Weight:4 500 kg  

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight:  14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

A compact Arburg injection molding machine is available. Clamping force: 180kN, daylight: 221mm/221mm, platen dimensions X/Y: 400mm/400mm, max. opening stroke: 275mm, min. mold installation height: 150mm, max. platen distance: 425mm, ejector force: 18kN, ejector stroke: 95mm, screw diameter: 15mm, weight: approx. 1900kg, operating hours: approx. 23300h. Documentation available. An on-site inspection is possible.

Key data: 2000 kN

Clamping unit very well preserved, see pictures, also fits 570A as a spare part

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

Arburg 1 818 310 011-2V2 +B18 SN 112634 (861) Bosch 0 811 405 077 Hersteller: Arburg / Bosch Teilenummer: SN 112634 Leiterplatte Number: Bosch 0 811 405 077 Type: 1 818 310 011-2V2 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062523

Arburg 120.529 SN 2.5275G temperaturecards Multronica Spritzgiessmaschine Ersatz Hersteller: Arburg Teilenummer: SN 2.5275G Type: 120.529 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11000323

Arburg 14326-Z SN 158.058 Temperaturecard (18) Dialogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 158.058 / SN 158058 Type: 14326-Z Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11082523

Arburg 1 818 310 011-2V.1 +B17 Bosch 0 811 405 045 Prop. Verst. PL-Valve NG-10 Hersteller: Arburg / Bosch Teilenummer: 1 818 310 011-2V.1 Leiterplatte Number: Bosch 0 811 405 045 Type: Prop. Verst. PL-Valve NG-10 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062123

Arburg 173.411 Aggregatkarte Multronica Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: - Type: 173.411 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 11000423

Arburg 381 B SN 72.447 Multi V24 Karte (20) Dialogica Spritzgiessmaschine Ersatz Hersteller: Arburg Teilenummer: SN 72.447 / SN 72447 Type: 381 B Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11065123

Arburg 4WRE10EA32-13/24Z4/M-425 Nr. 41447 Druckbegrenzungsventil Hersteller: Arburg Teilenummer: Nr. 41447 Type: 4WRE 10 EA32-13/24Z4/M-425 Druckbegrenzungsventil Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 31094623

Arburg 541 SN 107.828 A Sicherheitsrelaiskarte +B13 Dialogica Ersätzteile Hersteller: Arburg Teilenummer: SN 107.828A / SN 107828A Leiterplatte Number: SN 95144 Type: ARB 541 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11002223

Arburg 665 SN 150.369 A Leistungsbusplatine +C14 Selogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 150.369 A / SN 150369A Leiterplatte Number: SN 116753 V.01 Type: ARB 665 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11002723

Arburg A10VSO 18 DFR1/31R-VRA12KB2-S2761 Rexroth Axialkolbenpumpe Hydraulikpumpe Hersteller: Arburg / Rexroth Teilenummer: MNR: R902475215 Type: A10VSO 18 DFR1/31R-VRA12KB2-S2761 Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 3100218

Arburg A10VSO 28 DR/31R-PPA12N00-SO109 Rexroth Axialkolbenpumpe Hydraulikpumpe Hersteller: Arburg / Rexroth Teilenummer: Ident.nr. 00911110 Type: A10VSO 28 DR/31R-PPA12N00-SO109 Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 3110028

Arburg ARB 254 C SN 48.682 Eingangskarte (9) Dialogica Spritzgiessmaschine Hersteller: Arburg Teilenummer: SN 48.682 / SN 48682 Type: ARB 254 C Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referee: 11081523

Arburg ARB 270 G SN 42458 Leiterplatte Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 42458 Leiterplatte Number: SN 42458 Type: ARB 270 g Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061323

Arburg ARB 267 1 818 310 011-2V1 SN 109302 (267) Bosch B 830 303 314 Prop. Verst Hersteller: Arburg / Bosch Teilenummer: SN 109302 / 1 818 310 011-2V1 Leiterplatte Number: Bosch B 830 303 314 Type: ARB 267 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062623

Arburg ARB 280 B SN 43697 Leiterplatte Spritzgiessmaschine Ersätzteile Hersteller: Arburg Teilenummer: SN 43697 The number of the Spurs: - Type: ARB 280 B Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061823

Arburg ARB 282 C SN 43739 Leiterplatte Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 43739 The number of the Spurs: - Type: ARB 282 C Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061523

Arburg ARB 315 B SN 48197 Leiterplatte Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 48197 The number of the Spurs: - Type: ARB 315 B Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061523

Arburg ARB 325 B SN 51221 Spritzgiessmaschine Ersatzteile Hersteller: Arburg Teilenummer: SN 51221 The number of the Spurs: - Type: ARB 325 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11061423

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Key data: 1500 kN, 40 mm

ARBURG ALLROUNDER 520 H 1500-400 (2015) Injection molding machine + WITTMANN ROBOT + Conveyor belt In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight ...

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...