arburg 420c used for sale

Key data: 1500 kN, 35 mm

Arburg 470 C Golden Edition – 150T Year of manufacture 2006 Screw diameter: 35 mm Pump hours: 33,756 h Automatic operating hours: 26,507 h Connection: 400V 50 Hz Installed power: 33 kW The press is operational and in good working order.

Arburg 420 C 1000-250 (2000) Clamping force : 100 t Screw diameter : 30 mm Distance between tie bars : 420 x 420 Shot weight : 100 g Max mold hight : 200 m Max opening : 730 g Hydraulic cores : 0 + robot TECHNOMATIC

Training machine only autom 550 operating hours R1344 Injection moulding machine ARBURG Type 270 S - 250 - 150 built in 2001 SELOGICA control system Very well-maintained training machine with few operating hours approx. 550 h car and 1,300 hPump Screws D = 30mm Machine has now (May 2026) been converted to new software and CF Drive Machine can be demonstrated under power and instructed by a specialist

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg Euromap

Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons   Tie-bar Spacing: (H × V): 470 mm × 470 mm   Maximum Plate Size : 650 mm × 650 mm   Minimum Mould Installation Height: 250 mm   Maximum Distance between Platen (when fully open): ~750 mm   Mould Opening Stroke : 500 mm   Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³   Approximate Shot Weight (for PS): 210 g   Injection Pressure: 1 670 bar   Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power   Heating Power: Example listing ~ 10.2 kW   Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m   Machine Weight:4 500 kg  

Arburg 270 S 250-60 (2004) Clamping Force: 25 t Tie Bar Spacing: 270 mm × 270 mm Platen Dimensions: 400 mm × 400 mm Max. Mold Opening Stroke: 275 mm Min. Mold Height: 198 mm Max. Daylight: 279 mm Ejector Stroke: 95 mm Mold Opening Force (Max.): 14 kN Machine Dimensions (W × D): 1250 mm × 3800 mm Machine Weight: Approximately 1900 kg Screw Diameter: 22 mm Stroke Volume: 39 cm³ Injection Pressure: 1810 bar Injection Flow (2 Pumps): Up to 8.1 cm³/s Material Throughput (PS): Up to 22.0 kg/h Year of Manufacture: 2004 Type: Hydraulic Injection Molding Machine

Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

420 cc engine Rated pressure of 4400 PSI Nominal pressure 303 bar 4.0 GPM rated current 4 spray nozzles 1 soap nozzle 15.24M Braided High Pressure Hose 33 cm Never Flat tyres Unused. Auction-ID: A1-40265-87

Machine Type: Injection Moulding Machine Manufacturer: Arburg Model: 570C 2000-675 Year: 2001 Screw Diameter: 55 mm Shot Weight: 390 g Stroke Volume: 427 cm³ Injection Pressure: 1890 bar Adjustable Heating Zones: 6 Clamping Force: 2200 kN Distance Between Tie Bars: 570 mm Mould Height Min.: 600 mm Size of Mould Platens: 795 x 795 mm Ejector Stroke: 250 mm Remarks: Hydraulic injection moulding machine, equipped with 55 mm screw unit and 2200 kN clamping force. Auction-ID: A7-45993-3

Machine type: Injection Moulding Machine Manufacturer: Arburg Model: Allrounder 420 V 1000-150/60 Control: Arburg control Year: 1998 Serial number: 172437 Working hours: n/a Clamping force: 1000 kN Mould opening stroke: approx. 250 / 500 mm Distance between tie bars: approx. 420 x 420 mm Mould platen size: approx. 545 x 545 mm (from document) Screw diameter: 25 / 18 mm Shot weight (PS): approx. 49 / 18 g Operating voltage: 400 V / 3~ / 50 Hz Total connected load: approx. 31.0 kW Injection unit: Size 150 / 60 Hopper: Yes Accessories: Documentation, hopper, control unit Remarks: Machine in used condition. Control operational (screen visible). Includes documentation. Typical signs of use present. Own mass: approx. 3,700 kg Dimensions (LxWxH): approx. 4,700 x 1,700 x 2,100 mm Auction-ID: A7-45993-5