apv homogeniser used for sale

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.

Description :  FBF Homogeniser for 12,000 Litres per hour product. This machine has been built in 2008 and was working since in one large dairy that is equipped with state of the arc equipment and in-house engineers taking full care of there machines. In September 2024 the machine was unplugged and dismantled for our stock. We have a large number of spare parts with the machine ie. Reducer, Crank Shaft, Pistons, motor, gaskets, rings, etc.  The FBF homogenisers are mostly suggested as they have a low cost service and spare parts pricing . The machine is capable of 180 bar at 12,000 litres with an integrated user control panel. Fully guarded with stainless steel 316/304 , pressure gauge analog indication,  Technical details :  Make : FBF  Model : 075  Serial Number : 08112348 Working Pressure : 180 bar( 18 MPa)  Supplied Power : 76,5 Kw  Electrical Connection : 400 ...

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

Vacuum homogenizing system, make Becomix Type RW 2.5 Mobile table version with anchor stirrer, vacuum pump, steering, etc. Utility room: Operating temperature 100 ° c. Pressure-1 / + 1 bar, vacuum Content 5 litres Boiler room: Operating temperature 110 ° C Pressure 4 bar 4.8 kW Contents 2 litres

Y.O.M.: 1997 No.: 96-1872 Dispax Reactor Motor Ex-Protection Dimensions LWH: 1000 x 400 x 800 mm Weight: approx. 80 kg

Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition

The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany

Make : EGLI Model : EBH1500EP Usage : Butter Homogeniser / Silo Capacity : 1500kg.hr Y.O.M : 2011 Condition : Very Good

Make : Benhil Model : Microfix 8471 Capacity: 1400 kg/hr Block Loader : Pressure inserter Condition : Very Good Electricals : New Rewiring

Herbort 159D Homogeniser Serial: 1 Stainless homogeniser, 150l stainless hopper, 3Ph

KK UNI-BA Homogenizer Model: ARIETE Type: NS5160HA Flow rate: 7000 l/h Max. Operating Pressure: 700 bar

Gaulin, Homogenizer model MC18 3TPSX. stainless steel clad, 2 stage hydraulic valve assembly, 54mm pistons, Tungsten Carbide coated. aseptic cilinderblock, puppet valves.. Remote controlled homogenisation pressure ajustment and and read-out. Capacity 6000 l/h, 210 bar Maintenance history available. Spare parts available. Excellent working condition,

FBF Homogeniser 12,000 L/h 180 bar Make : FBF Model :075 Capacity : 12,000 L/H Bar Pressure : 180 bar Motor :76.5 kw Y.o.m : 2008 Weight : 2850 kg Condition : very good condition

Make : FBF Model : 60/45 Capacity : 5000 L/h Bar pressure : 250 Year of Manufacture: 2016 Condition : Excellent Condition Used on : Milk / Yoghurt production Motor : 46 kw

Manufacturer: GEA / Niro Soavi Type: NS 5160 H YOM: 2004 Capacity: 20,000 l/h max. operating pressure: 220 bar Including Control Cabinet (in excellent condition, recently renewed) Condition: very good

Used homogenizing mixer manufactured by UCR (PL), model M 300. The mixer is designed for making creams, pastes, emulsions, ointments and other substances in the fields of cosmetic, pharmaceutical, food and chemical industries. The mixer is equipped with a vat with a working volume of 250 liters, made of acid-resistant steel. The vat has a heating jacket and insulation. An additional loading opening is located on the lid and is equipped with a hopper for feeding additives during mixing. The lid is hydraulically lifted. Technical data: -Power supply 380V -Installed power 21kW/27kW -Heating temperature range 20°C + 90°C -Pressure from 0 to + 0.6 bar. -High of mixer with raised lid 3120 mm. -Height of mixer when lid is down 2100 mm -Width 1260 mm -Length 1750 mm -Mass approx. 1800 kg Tank: -Working capacity 250 L -Total capacity 300 L Wall-anchor agitator: -Mixer s ...

High Pressure Homogeniser Max capacity 5000 L/hour Max pressure 400 bar Number of piston 3 2 Stage Homogeniser Dimentions : Length: 1470mm Depth: 1965mm Height: 1620mm Weight: 2800kg

For sale: Homogeniser Alva Laval SHL25 capacity 2850-7800 L/H 250 bar

The Tetra Pak TA 20 homogeniser is a type of machinery used in the food and beverage industry, primarily for the homogenization process of liquid products. Homogenization is a mechanical process that breaks down fat globules in liquid products to create a uniform and stable emulsion. This process is crucial in the production of products like milk, cream, and fruit juices, improving their texture, stability, and mouthfeel., Key Features of the Tetra Pak TA 20 Homogeniser:, - Design and Capacity: The TA 20 is designed for medium-scale production, capable of handling various flow rates depending on the application. It typically supports a wide range of products., - Versatility: This homogeniser can be used for a variety of dairy and non-dairy applications, including milk, cream, yogurt, beverages, and sauces., - High Efficiency: It offers efficient homogenization with adjustable pressure se ...

GEA Niro NS2006P piston homogeniser Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg

The BERTOLI H3075 dairy homogeniser is a piece of equipment used in the dairy industry primarily for homogenizing milk and cream. Here are some key points about it:, - Functionality: The homogeniser works by breaking down fat molecules in the milk, ensuring a smooth and uniform mixture. This process helps to prevent cream from separating and enhances the shelf life and quality of dairy products., - Applications: Its typically used in the production of a variety of dairy products such as milk, yogurt, ice cream, and cheese., - Specifications: Although specific technical specifications can vary, common features might include:, - Capacity: Often measured in liters per hour, indicating the amount of milk it can process., - Pressure Ratings: The operating pressure used during the homogenization process., - Material: Typically made from stainless steel for hygiene and durability., - Efficiency ...

Make : Inoxpa, Usage : Powder Blending - Homogeniser, Capacity : 5000 L/h, Y.o.m 2016, Powder Inlet Funnel, Product Inlet Pump, Product Outlet pump for circulation, Sample Valve, Stainless steel skid mounted, Condition : Excellent

These Scrape Surface Heat Exchangers can be used on various products for heating process such as Tomato pastes, custards, margarines, oils, mayonnaise, etc. We have fully refurbished these units by changing internal gaskets, rings, sand blasting , paint job, new stainless steel frame , new controls and motor test and service ., Technical Details of VOTATOR, - Make: A. Johnson & Co London, - Year of Refurbishment: 2025, - Quantity: 5 units, - Diameter: 6 inches, - Metals: Grade 316 Stainless Steel, - Usage: Horizontal Votators, Specifications:, - Chamber Dimensions:6 Diameter Stainless Steel Chamber, - Length: 6, - 1 1/2 between end plates, - Rotating Centre:4 3/4 Diameter Stainless Steel, - Equipped with two PTFE scraper blades, - Drive:11 kW Motor Drives, - Speed: 1470 rpm (through a V-belt reduction), - Reducer:Giving a shaft speed of approximately 367 RPM., Availability:, - Location:  ...

Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...

3-Stage In-Line High Shear Mixer 18,5 kw, max 3000 rpm, inlet DN80 / outlet DN65, three stage multishare in-line mixer, with Eagle Burgmann Thermosiphon TS2000

This incomplete APV Rannie Blue Top 30.56 homogeniser is a 3-cylinder machine which is designed for 1.650 liter per hour with a maximum pressure of 300 bar. The machine is without a current main motor. The homogensier is equipped with 2-stages but without the valve cylinders / pressure adjustment handles. Piston diameter 42 mm. Oil pumping system inside the machine. Stainless steel cladded (not all covers available)., Type of Machine: Homogeniser, Capacity: up to 1.650 liter per hour, Stages: 2 stages, Max. Pressure: 300 bar, Piston diameter: 42 mm, Motor: No motor, Dimensions: 133 x 90 x 155 cm, Weight: 900 kg

This GEA Niro Soavi NS3037H homogeniser is a 3-cylinder machine which is designed for 6.000 liter per hour with a maximum pressure of 100 bar. The homogensier is equipped with 1-stage with puppet valve cylinder. Manometer. Overpressure valve. Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Main control panel., Type of Machine: Homogeniser, Capacity: 6.000 liter per hour, Stages: 1 stage, Max. Pressure: 100 bar, Valve cylinder: Puppet valves, Piston diameter: 70 mm, Motor: 30 kW - 400 V - 53,37 Amp - 50 Hz - 1.470 rpm, Dimensions: 230 x 150 x 152 cm, Weight: 1.960 kg

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...

Used piston homogenizer from GEA type Ariete NS 3075. Maximum working pressure 20 MPa. Capacity 10,000 litres/h. Control.

Used Homogeniser High Pressure Tetra Pak 10000 lhr Main technical features of the Tetra Pak Homogeniser Alex TA25 Tetra Pak manufactured the TA25/200BAR model in 1995 as a used high-pressure homogeniser, designed to process up to 10,000 liters per hour at a pressure of 200 bar. Currently, the machine operates at a capacity of 10,000 liters per hour, while maintaining a maximum pressure of 200 bar. In addition, the machine includes two homogenization stages, which are perfect for precise particle size reduction. Components and operation The Tetra Pak TA25/200BAR uses mushroom valve cylinders, which therefore ensure efficient control of liquid flow. The pistons have a diameter of 50 mm, which consequently allows the machine to evenly distribute pressure across the two stages. Moreover, a 37 kW motor powers the unit, with an input of 400 V, drawing 68 Amps, running at 50 Hz and 1480 rpm. Di ...