ant used for sale

technical data: Make: Möhringer Power: 5 kW

technical data: Make: ADDA Masch. No.: 4695 Type: 315-S-2 Types No: 49 89 KW: 110 RPM: 2875 Diameter V-belt disc: 190 mm

technical data: Make: Schorch Type: Kan 60/6 Ma Types No.: 1200111/1 Purpose: general KW: 11 RPM: 960 Diameter V-belt disc: 400 mm diameter, 3 rilly, SBP

technical data: Make: Möhringer Type: for block pull kW: 5 kW Rpm: 34 rpm, 40% ED Shaft diameter motor: 50 mm

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT other quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cann ...

Transmission belts, drive belt, flat belt, leather belt, belt, transmission belt FROM leather, fabric, rubber, plastic direct from the manufacturer! All dimensions and qualities according to your possible! We customize for you and look forward to your inquiry!

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Butterfly valve, flap valve, ball valve -Drive: without -Connection: DN40 -Material: stainless steel -Weight: 1.8 kg

Description Three-phase suction unit with filter and receiver. Voltage: 400 V Power: 1.1 Kw Capacity: 7 L Production: 100 - 200 Kg/h

Description Three-phase suction unit with filter and receiver. Voltage: 400 V Power: 1.3 Kw Capacity: 7 L Production: 100 - 200 Kg/h New cleaning solenoid valve.

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN65 -Nominal pressure: PN16 -Width: 100 mm -Material: stainless steel -Weight: 3.3 kg

Butterfly valve, flap valve, ball valve -Drive: without -Connection: DN80 -Material: stainless steel -Weight: 3.3 kg

Butterfly valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 2.2 kg

Butterfly valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: stainless steel -Weight: 2.2 kg

Butterfly valve, flap valve, ball valve -Drive: pneumatic -Connection: DN65 -Material: stainless steel -Dimensions: 380/100/H130 mm -Weight: 7 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector, crevice nozzle -Manufacturer: Nilfisk, inclined rubber tube nozzle unused OVP -Type: 40000214 D40 Antistatic -Connection: Ø 40 mm -Number: 3x nozzle available -Price: per piece -Dimension: Ø 52 x 195 mm -Weight: 0.2 kg/piece

Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm -Weight: 746 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1400 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 260/220/H240 mm -Weight: 12 kg

FMT Antares automatic palletiser with Atlanta pallets wrapper Capacity 20.000 bph for pallets 1.200 x 1.000 (Euro-pallets) also half pallets Manufacturing year 2015 Single lane infeed, driveway with brushless motorized dosing belt Automatic layer-pad deposit system with floor-mounted storage unit Empty pallets storage unit Pallets handling on belt conveyors Siemens Sinamics motor drives (profibus) Siemens ET200S machine drive Atlanta wrapper with rotary table suitable for wrapping pallets, equipment continuation with Antares palletizer machines in very good condition to be dismantled on site Available immediately

Palletizer | Pallet Wrapper FMT • Year: 2015 • Speed: 20.000 Bph • Model: ANTARES • Push system • Interlayer system • Pallet storage • Pallet Wrapper ATLANTA • Model: MYTHO A • Type: Rotary table • Workable formats: Pallet 1.200x1.000 and half pallets • Safety protections

Overview The palletizer was built in 2015 by Italian manufacturer FMT. It is complemented by a pallet winder which was built in 2018 by Italian manufacturer Atlanta. The machines are in good condition, have already been professionally dismantled and stored in a warehouse. Techn. Details Palettiser | FMT | Antares | 2015 Capacity: up to 20.000 bph For pallets 1.200 x 1.000 (Euro-pallets) and also half pallets Single lane infeed, Driveway with brushless motorized dosing belt Automatic layer-pad deposit system with floor-mounted storage unit Empty pallets storage unit Pallets handling on belt conveyors Siemens Sinamics motor drives (profibus) Siemens ET200S machine drive Pallet winder | ATLANTA | - | 2018 Capacity: up to 20.000 bph For wrapping pallets 1.200 x 1.000 (Euro-Pallets) and half pallets with shrinkable PE film With rotary table suitable for wrapping pallets   Motorization and C ...

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...

pallet trucks, ant pallet truck Brand: Jungheinrich Type: EJE-A 16G 20-115 Load capacity: 1600 kg Fork length: 115 cm Attention: without battery, but fully functional All information without guarantee

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Still EXD SF 20 Pallet Stacker E-Ant + Charger + Driver's platform lateral support Fork length 120 cm YOC 2011 From the manufacturer the following information: The EXD-S is a heavy-duty double-deck stacker that can lift a maximum of 2,000 kilograms when using the initial lift or twice 1,000 kilograms when using double-deck loading and unloading. With the EXD-S, two pallets can be transported at the same time - This allows trucks to be loaded and unloaded in a time-saving and effective manner. Frame. - The shape of the frame has been specially developed for use in trucks and in confined spaces. In particular, the edge shapes support driving over ramps and entering trucks. - The tips and undersides are designed as sliding runners and prevent them from getting caught at transitions. The angled corners of the platform make it possible to drive backwards out of the truc ...

Stacker truck / electric ant, Jungheinrich, EJD 220 - used - : Price ex location: 3.950.-€ (net)! Manufacturer: Jungheinrich Type: EJD 220 Year of construction: unknown Serial number: 90455466 Payload: 1.000kg Lifting height: 1.660mm Operating hours: approx. 3,100 Sale incl. charger! Condition: good Available: from approx. End of October Location: Cologne

Hydraulic power unit, compact power pack, pallet truck unit BOSCH 0 542 015 021 069 ( 0542015021069 ) tank capacity approx. 1,5 l Engine: 1 547 220 500 ( 1547220500 ) 2,0 kW 2200 rpm 24 V DC spare part for electric pallet trucks STILL, WAGNER, ANT ! USED, tested ! Dimensions: 420 x 200 x 150 mm

Toothed belt gear motor, geared motor DIETZ - MOTORS KSL-ANT-05 DR 80B/ 4 Q 0,75 kW 972 rpm 220 / 380 V IP54 hollow shaft: Ø 28 mm approx. 5 m connection cable New ! Dimensions: 340 x 260 x 220 mm

Jungheinrich Ant Load capacity 1500 kg Lifting height 3500 mm At call

Pneumatic double piston dosing pump for pumping and mixing 2 media. 1 pneumatic cylinder with 2 pump heads. Required air pressure 8 bar. 1/2-inch connections with 4 stopcocks. Up to approx. 40 strokes per minute, or approx. 80 litres per minute / approx. 5 cbm per hour. On platform wagon ant with 2 swivel/brake castors and 2 fixed castors. Overall pump dimension: 6001300x1000mm, weight about 80kg.

pressure:40 t distance between columns:600 mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW 100 % before loading warranty: none used double column drawing press, make FRITZ MUELLER, type S 40.11.1, year of production 1978

universal tool sanding machine manufacturer fa Kellenberger (Strausak) the machine is geometrical and also funktionmig in a very good state. Spitzenh?he: 125 mms top width: 680 mms L?ngsbewegung: 500 mms Arbeitsfl?che of the table: 1030 x 214 mms Q?rzustellung: 280 mms mm H?henverstellung Schleifkopf:300 wheel area Schleiftisch: + 90 °/-45 ° wheel area Schleifkopf: 350 ° Horizontally wheel area Schleifkopf: 360 ° Vertically Schleifspindel 4 speeds: 2250-3000-4500-6000 revos Schleifscheibendurchme?er: 250 mms Antriebsleistung:Schleifsp .: 1.5 kW Sony 2-axes digital display 0,001 mms

Millipore K-Prime III Biochromatography system for cleaning and separation of proteines, biotechnology products, antibodies etc. The System is GMP-conform. floating rate 1-10 l/min, nominal pressure 7 bar, UV-H and LF Messuring after column, fraction sampler valves The System is consisting of corrosion-resistant materialials like lastic and Hastelloy-C.

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

Cheap LAGERCONTAINER 10 feet (3m) ideal as a material/storage container from location DE-83395 Freilassing Delivery at extra cost ! DESCRIPTION / SPECIFICATION Factory-new storage containers in robust and stable design. Welded steel frame made of wood and rolled profiles with corner fittings, stackable. The floor construction consists of steel beams with welded cross beams and a covering made of 28 mm thick, water-resistant glued plywood. The walls were made of a profile plate with a thickness of 1.5 mm and are welded to the frame construction. The roof skin consists of a 2.0 mm thick profile plate. Container doors are equipped with a double lip seal and rotary rod closures. Each container has anti-theft protection and forklift bags. TECHNICAL DATA / TECHNICAL DATA Dimensions outside: length x width x height: approx. 2,991 x 2,438 x 2,591mm Dimensions inside: length x wid ...

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

extinguishing water tank, storage tank, earth tank, irrigation tank, sports field irrigation, cistern, rain collection container with 100,000 litres capacity for the storage of service water / extinguishing water. Dimensions: D = 2.90 m - L = approx. 16.00 m The container has a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is provided with a bitumen coating / bitumen insulation on the outside. Slight insulating damage due to removal and transport may be present on the container. Price from Söhrewald - freely charged - For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 dome shaft made of glass-fibre reinforced plastic - GRP, complete with walk-in Steel plate cover - diameter = approx. 1.00 m, height = approx. 0.85m, - 1 pc. suction l ...

The Rollenspalter is suitable for the columns and crushing of wrapped paper, cardboard or plastic rollers on core, or bail. Power 7, 5kW Control Siemens PLC supported with two-hand safety control -Cutting force 2x20to -Cutting speed 22, 3 mm / sec -Cutting channel length 2000 mm -Cutting channel height 1200 mm -Machine weight approx. 3500 kg colour of machine body RAL 7016 (anthracite grey) Guard RAL 1028 (melon yellow) Photos and more info on request Delivery time: approx. 12-14 weeks

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

Used rebuild KHD Humboldt Wedag model S3?01 decanter. New 1992. Cylinder made of hardened steel (it does not rust but not stainless) lenght of cylinder 1370 mm, cone lenght 110 mm. Screw made of steel also hardened. Drum speed 2200 rpm. Motor 30 kW with clutch dydrodynamic made by Voith (easy start). Lubrication by ump. New bearings casindgs, transmission belts, all bearings are new, seals. During the rebuild drum and zscrew ware balanced. Suport fram with antivibrators. Manual available in Polish. Capacity approx. 20000 L/H.