annealing used for sale

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Used TR-5 rotary tablet press. Technical Specifications - Manufacturer – Metalchem ​​Annopol - Type – TR-5 - Number of punches – 35 - Pressing pressure – max. 10 tons - Year of manufacture – 1988 - Weight – approx. 2000 kg The machine is operational but requires repair.

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

Annular seal in link chain design, pipe sealing cushion -Various: Diameter -Can be used as a wall penetration, tank embedding and casing pipe sealing -Transport dimensions: 600/500/H350 mm -Weight: 35 kg

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

A case annealing system is offered for sale. With digital temperature control. Equipped with ammonia dissociator and control cabinet. Inspection possible by appointment.

Various spare parts for annealing furnaces

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

1.05 m width, with Weidemann mount

Machine is equipped with: - chip conveyor - tailstock - 4 jaw chuck Auction-ID: A1-50690-4

The car runs on 3 cylinders instead of 4. ABS, rear seat foldable in parts, driver airbag, passenger airbag, front side airbag(s), air conditioning, anti-lock braking system, anti-slip control, audio navigation full map, car phone preparation with bluetooth, tire pressure monitoring system, driver's seat height adjustable, on-board computer, electrically adjustable door mirrors, heated exterior mirrors, central locking with remote control, cruise control, roof rails, electronic brake distribution, electronic stability program, electric windows rear, electric windows front, ESP, halogen fog lights, leather steering wheel, leather gear lever, alloy wheels 16\", rear parking sensor, radio-cd/mp3 player, start/stop system, immobiliser, steering wheel adjustable, power steering, steering wheel multifunctional, traction control, tow bar Auction-ID: A1-41952-84

Lot of 240 18th birthday signs with cord – New Lot of 240 small 18th birthday signs with cord. Important information – to be read before bidding Goods from end-of-series and surplus products, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weight are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her assessment of the lot. Auction-ID: A1-51086-385

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm MaterialGraphite General No.28123-21620 Year of construction2010 Weight355 kgFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsShell and tube heat exchangersBiopharmaceuticalDetergent & ...

Austempering Automated Press Quenching Black Oxide Bluing Bright Annealing Calcining Carbon Baking Carbon Restoration Carbonizing De-Waxing DrawingTempering ForgingReheating Gas Carburizing Gas Nitriding Heat Flattening AMS-2750E standard Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS-2750E standard High Temperature Tempering Homogenizing Incineration Ion (Plasma) Nitriding Ion Carburizing Low Pressure Carburizing Malleablizing Marquenching Oxy-Nitriding Post Oxidation Pre-Heating Pre-Oxidation Press Quenching Purging Pyrolysis Resource Recovery Pyrometallurgy Quenching Reheating Reheating for Press Quench Scale Free Heating Soldering AMS-2750E standard Solution Treatments T6 Heat Treatment Thermal Destruction Torrefaction Triniding™ Vacuum Heat Treating Washing STRESS RELIEVING AGING NORMALIZING HOMOGENIZING ANNEALING ANNEALING TEMPERING HEATING HARDENING ...

CHARACTERISTICS HEAT TREATMENT EQUIPMENT   temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mm Inlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm (annealing furnace and cooling section) N2 purge gas volume 420 m3 Furnace design: Roller hearth continuous furnace Material: Tubes Outer diameter: 14 - 180 mm Wall thickness: 0.8 – 8.0 mm Length: 4.0 – 13.0 m Surface before annealing: - - Throughput at 920 °C annealing material temperature Throughput at 700 °C annealing material temperature Reference pipes: 25 x 2.5 x 8000 mm 33 x 3.5 x 8000 mm 40 x 3.5 x 8000 mm 55 x 2.8 x 8000 mm 63 x 4 x 8000 mm 75 x 6 x 8000 mm 110 x 8 x 8000 mm ...

Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS 2750E standard Ovens Chamber Furnaces Laboratory Furnaces Industrial Furnaces Ashing Furnaces Annealing Furnaces Tube Furnaces Vacuum Furnaces Furnace heat treatment normalizing, preheating, austenitizing, pearliting, ferriting or softening. From electrically or gas heated melting furnaces, dewaxing furnaces or core drying furnaces to fully automatic annealing plants for aluminum or steal, covers professionally all applications for the foundry industry. Melting and Holding Furnaces melting furnaces Cleaning Furnace for Riser Tubes, Electrically Heated Forced Convection Furnaces Drop-Bottom Furnaces Electrically Heated or Gas Fired Quench and Tempering Plants for Steel Quench Tanks Chamber and Bogie Hearth Furnaces Catalytic and Thermal Post Combustion Systems Continuous Operation Furnaces Temperature Uniformity and Sy ...

Key data: 1 C, 330 mm, 890 mm

Chamber furnace KKQ RX3-20-12 up to 1,200°C Rivet Heating Furnace Furnace combustion chamber opening: 330 mm x 300 mm. Combustion chamber depth of the steel box: 800 mm. The dimensions refer to the removable steel box. The actual combustion chamber is 580 mm wide, 440 mm high and 890 mm deep. Dimensions of the chamber furnace including attachments: Width 153 cm x depth 165 cm x height 155 cm. Weight: 1,130 kg. No shipping, only pickup. Equipment & Features: Very large and deep combustion chamber of 227 liters for workpieces and batches. Robust industrial design. Removable steel box (muffle insert/glow hood). Ideal for metalworking, heat treatment and forging Areas of application: Workshop, ceramics, metal, materials testing, metalworking, materials engineering & metallurgy, burning & sintering, hot riveting, heating of steel rivets, forging preheating, forging. Used  ...

Bausch & Ströbel filling and sealing line for pre-filled syringes – unused Unused Bausch & Ströbel system, built in 2022, for fully automatic filling of nested disposable syringes and sealing with plunger plugs. The line includes the tub unpacking machine, the cover and protective film removal, the filling and sealing machine and the transport system. According to available information, the system achieves up to 36,000 syringes per hour, depending on the product, filling volume and format. A format set for 1 ml standard syringes in the 100 nest as well as rotary lobe pumps for ten filling stations with a filling volume of 0.3–2.1 ml are included. The system is unused and packed in original wooden crates near Hong Kong. A CE declaration of conformity is currently not available. Plant data Manufacturer: Bausch & Ströbel Components: TUM 9070, DVE 9070, SFM 5072 and N ...

Used Pieralisi malazers with control panel and P60 pumpsTechnical Specifications & Performance DataThese Pieralisi olive oil malaxers are second hand processing units designed for the malaxation stage in industrial olive oil extraction lines. As a key step between crushing and centrifugal separation, the malaxers homogenize and condition the olive paste to optimize oil yield and quality. The units are currently installed and have been maintained with regular annual service and cleaning. Suitable for integration into a used bottling line or broader industrial packaging and processing environment, they provide reliable throughput for producers seeking dependable performance in food and beverage production facilities.Manufacturer: PieralisiYear of manufacture: 2000Process role: Malaxation/kneading of olive paste prior to decanter centrifugeIndicative capacity: approximately 20 quintals/hour ...

IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

Qty. 1 Second-hand galvanising line Mfc.: ESMECH Equipment Ltd Built: 2016 Material: Cold Rolled Low Carbon Steel, Unannealed / FH U.T.S: 40 – 80 kg/mm2 Unannealed Strip Strip Width: 650 – 1250 mm Thickness for GL: 0.15 mm - 0.60 mm Incoming Coil Data ID: 508 / 610 mm OD: 1000 - 1900 mm Weight: 25 T Incoming Strip Surface Condition Oil Amount: 100 - 400 mg/m2 both side max. Iron Fines: 50 mg/m2 per side max. Scale or Rust: None Incoming Strip Shape: Flatness, crossbow and camber to JIS G 3141 Outgoing Coil Data Grades: Full hard & CQ Coating: 70 to 200 gm/m2 (both sides) – Aluzinc Coil ID: 508 mm / 610 mm (rubber sleeve) OD: 1000 - 1900 mm Weight: 25 T Type of the Line: Non-Ox Annealing Furnace type Continuous Metal Coating Line Process Speed: 150 m/min Entry/Exit Speed: 180 m/min Furnace capacity: 17.7 MT/hr max Net available working hours: 7200 w ...

Key data: 1 C, 200 mm, 220 mm

Chamber furnace Nabertherm L5/11 with controller B170 Manufacturer Nabertherm. Made in Germany. Temperature max 1,100 °C. 2.4 kW. 230 V. Nabertherm muffle furnace with hinged door. Heating from two sides by ceramic heating plates Ceramic heating plates with integrated heating wire, Splash and exhaust gas protected, easy to replace. Insulation made of unclassified fiber material. Housing made of stainless steel structural sheets. Double-walled housing for low Outside temperatures and high stability. Adjustable supply air opening in the door. Exhaust air opening in the rear wall of the furnace. Low-noise operation of the heater with solid state relays. Internal dimensions (WxHxD): 200 x 130 x 220 mm. External dimensions (WxHxD): 390 x 385 x 460 mm. Volume 5 l. Internal NR 645-2 Areas of application & details: Laboratory Furnace, Muffle Furnace, High Temperature Furn ...

11052026 Modernized 200 hl Brewery with 6 × 540 hl CCTs and Siemens S7 Automation This modernized 200 hl brewhouse was originally manufactured in 1995 by leading German brewing equipment manufacturers including Ziemann, Huppmann, and Seeger. The complete brewhouse underwent a comprehensive rebuild and modernization prior to installation at its current location in 2018. Modernization included complete new operation management system with Siemens S7 series PLC automation system. The brewhouse can produce up to eight brews per day and has previously been operated for High Gravity Brewing (HGB) applications. The designed annual production capacity is approximately 400,000 hl, based on a production rate of 1600 hl per day, five production days per week, and fifty production weeks per year. The brew line process comprises truck malt receiving, one 99-ton storage silo, weighing and mil ...

Key data: 250 °C

Manufacturer: David + Baader, Kandel Type: 10880.3 Machine Type: Industrial Furnace/Chamber Furnace/Heat Treatment Furnace For sale is a used industrial furnace from the manufacturer David + Baader Kandel, type 10880.3. The furnace is suitable for a wide range of applications in industry, trade, laboratories and workshops and is ideal for heat treatment, drying or annealing processes. Technical data Manufacturer: David + Baader Kandel Type: 10880.3 Type: Electric chamber furnace Condition: Used Further technical data on request or according to the nameplate Features and benefits Robust industrial design Uniform heat distribution Reliable temperature control Stable furnace chamber Suitable for continuous operation Proven German quality Possible areas of application Heat treatment of metal parts Annealing and tempering work Drying processes Laboratory and testing ...

Key data: 1150 °C, 260 mm, 500 mm

Manufacturer: W.C. Heraeus Hanau Type: KR 260 Machine Type: Electric Chamber Furnace/Laboratory Furnace/Heat Treatment Furnace For sale is a high-quality industrial furnace from the renowned manufacturer W.C. Heraeus Hanau, model KR 260. The furnace is ideal for heat treatment processes, annealing, material testing, laboratory applications, and research and development tasks. Features: Robust industrial design Electrically heated chamber furnace Uniform temperature distribution Temperature control for precise processes Ideal for laboratory, workshop, industry and research Solid German quality production Max. temperature: 1150°C Voltage: 330V 50Hz Power: 11.4kW; 20A Areas of application: Heat treatment of metals Annealing and hardening Material tests Ceramic and laboratory applications Research and development Interior chamber dimensions: B260 H180 T500

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...

Used SOVEREIGN Labelling machine 2500 BPHTechnical Specifications & Performance DataBuilt in 2024, this linear unit applies adhesive wrap-around labels at 2,500 bottles/hour on 1 L PET or glass cylindrical bottles. This used labelling machine focuses on clean application and fast setup across defined formats.Manufacturer: unknownYear: 2024Category: Labeling Machine (round bottles)Speed: 2,500 Bottles/hourProduct types: Water (Sparkling), Water (Still)Container types: Glass, PETFormats: 1 LRotation direction: LinearNumber of stations: 1No. of plates: 1Labeling method: AdhesiveLabel placement: Wrap around labelOptical centering system: MechanicalLabel adjustment: N/AHead adjustment: N/ACondition: in storageControl system: digital PLC/HMIOperating hours (past year): approx. 1,300Spare parts: none includedDocumentation: technical manuals and electrical schematics availableAdvanced Automation ...

Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actu ...

Marel MS2730 Filleting Machine with Back Bone Trim, High-performance automatic salmon filleting machine, Available from August / September., This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018)., Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor., Key Features, - Automatic salmon filleting machine, - Equipped with Back Bone Trim, - High fillet yield and excellent cutting accuracy, - Automatic adjustment to varying fish sizes, - User-friendly touchscreen control, - Hygienic stainless-steel construction, - Easy access for c ...

Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing fu ...

Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Iisc Hq E Rrszqdkxjvef Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle en ...

Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 100013501700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, ...

Type: Complete Scope & Dust Extraction Plant

KHS Anker Roland 10 HS – Rotary Labelling Machine, Year of Manufacture 2004 1. General Information The KHS Anker Roland 10 HS is a used rotary labelling machine manufactured in 2004, with a capacity of up to 12,000 bottles per hour. The machine is designed for continuous wrap-around labelling of PET bottles and is suitable for integration into existing filling and packaging lines in the beverage industry. Labelling is performed using the hot-melt glue process, with leading-edge and trailing-edge gluing. For this purpose, the machine is equipped with two KHS glue units. Bottles are fed into the labelling carousel via an infeed timing screw and an infeed starwheel. They are held in position between rotating bottle plates and centring bells and labelled during carousel rotation. The leading-edge gluing system enables the label to be picked up from the label magazine, while the trailing ...

FARO Focus Care NEW Bj. 2025 Range 100 m Flash Technology 1x FARO Core Scanner 1x Status Indicator 1x Power Block Battery 1x Power Dock 1x Power Supply 1x 64 GB high-speed SD card and reader 2 Year Warranty (8.2027) FARO Focus S, Focus M, Focus Premium Focus Core & ScanLocalizer Power Block FARO Scene - Annual License AS-Built Suite - Annual License Single User License BASIC Laser Scanning Starter Package: 2 Reference Ball Set FLEXI (12) 2 Set of 6 Reference Ball Feet with Mahgnet Plate 1 carbon tripod with quick release 20 3D measuring point discs

PICKLING LINES, TANDEM MILL, 18 ANNEALING FURNACES, TEMPER MILL, SLITTING LINES, SHOT BLAST MACHINE, STRIP WIDTH: 1000-1279 MM, ENTRY THICKNESS: 1.8 - 4.5 MM, EXIT THICKNESS: 0.7 MM