We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,919 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Motor power - 5.5 kW Number of actuator strokes/min. - 32 mm Net weight - 1750 kg Dimensions - 2.01x1.4x2.06 m Cutting flat bars: Flat bars max - 350 x 15 mm Flat bars (with 5º deformation) - 350 x 15 mm Knife length - 356 mm Cutting the angle at an angle of 45º max - 70x70x7 mm Station working height -859 mm Cutting angles and flat bars: L at an angle of 90º - 120x120x10 mm Round bars ø - 45 mm Square bars - 40 mm Punching holes: Punching force - 600 kN Max diameter x thickness ø - 40 x 11 mm Throat depth - 500 mm Working height of the station - 1106 mm Press for bending flat bars: Max width x thickness - 150 x 10 mm The machine has: Monolithic frame with the possibility of attaching accessories Pedal for performing electrical operations 5 workstations and 2 adjustable hydraulic cylinders: 1 - controls the work of the punching section, while the ...
used
sheet width: 4300 mm plate thickness: 6,00 mm distance between columns: mm rear stop: max. 1000 mm cutting angle: min. 0,5/max. 1,5 ° quantity of oil: 210 l total power requirement: kW weight of the machine ca.: 12,70 t dimensions of the machine ca.: m • Angle stop 2400 mm • Motorized back gauge with digital display 1000 mm • Pneumatic holding device • Central cutting angle adjustment • Manu. Cutting gap adjustment • Operating manual • 1 piece. Replacement upper knife The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Reinforced version, for 3-shift work. CNC SC5 control. The machine automatically sets both the angle and the gap after entering the material thickness. The machine has a quickly changing gap between the knives with CNC-controlled sheet thickness reading, and a hydraulically variable knife angle in the range of 1-3 degrees. 7.5 kW motor. Weight 6 tons. Electric bumpers with CNC position reading and setting, bumper travel 1050 mm. The bumper has a retraction function. Supports to hold sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.
new
number: 100 Positionen : 28 mm condition: neu weight: 280 kg dimensions: 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CNC universal grinder for external grinding of cylindrical surfaces. Two smoothly controllable axes. Precise positioning. Possibility to store 21 programs as standard. The machine is in good technical condition, it is possible to test it by agreement. Workspace: Circulating diameter 320 mm. Distance between tips / max. grinding length 500 mm Max. ground diameter 300 mm Max. workpiece weight - between the tips 150 kg Max. workpiece weight - jaws 40 kg Grinding wheel: Dimensions (diameter x width x opening) 405x75x127 mm Cutting speed 45 m/s Grinding spindle: Starting in the transverse direction - Z axis - mm Starting in the longitudinal direction - axis X 300 mm Angle of rotation ±30 ° Min. increment of 0.0001 mm Rapid feed 4 mm/min Speed - rpm Table: Start-up in the longitudinal direction - axis X - mm Starting in the transverse direction - Z axis 870 mm A ...
used
sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3200 mm cutting angle adjustment: 30´- 230´ ° strokes: 25-8 p. min. back stop way ca.: 600 mm throat: - mm total power requirement: 5,5 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3,5 x 1,6 x 1,45 m Condition: ready for operation: Video(s) available on our website.: CE signed: Electric 380 Volt: Back gauge electric with counter in front: 2 Geschwindigkeiten Foot switch: Protective railing + photoelectric barrier: Pair of blades for change: Shadow line lighting: cutting angle adjustment: Squaring arm withh mm-scale: 1300 mm Support arms: 3 x 1300 mm Hydraulic plate shears with cutting angle adjustment and back gauge with 2 speeds. Higher quality knives for stainless steel processing. The cutting performance refers to 380 N/mm² strength. The machine was used in a well-kept small busines ...
used
Specifications: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle hydr. adjustable 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 17 pcs - Motor backgauge 15 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 900 mm - Space requirements incl. back gauge, without front support arms -ca. W 4040 x H 2230 x D 2230 mm - Weight approx. 10500 kg -with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer - Rear area protection with grille
used
Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Accessories:, Pneumatic workpiece clamping,, Windows 7 PC + QCM 8.0, software VIALOGIC TIM Teach-In-Mode,, software package 1 (cylindrical tools sharp edge, corner and full radius),, software package 2 ( conical-spiral tools sharp edge, corner and full radius),, Software VIALOGIC Viascan,, QCM Network,, LightControlDevice,, Glass scales on the linear axes., Traverse X-axis: 200 mm, Y-axis travel: 350 mm, Z-axis travel: 250 mm, A-axis speed: 60 rpm, Workpiece holder: ISO 50, Workpiece diameter: 3 - 200 mm, Workpiece length: Max. 300 mm, Workpiece weight: max. 40 kg, Connected load: approx. ...
used
sheet width: 3050 mm plate thickness: 6,00 mm distance between columns: mm cutting angle: 0,5 - 3,0 ° drive motor: 11 kW down holder: 18 Stück total power requirement: kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: m • Automatic cutting angle adjustment • Automatic cutting gap adjustment • Cutting line lighting • Support arms • Knife with 4 cutting edges • Cutting length limitation • CNC back gauge 705mm adjustment range 705 mm • Angle stop • Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Swing diameter 280 mm, swing diameter with elevation plate 370 mm, distance between center and tailstock 780 mm, distance between tailstock and headstock 630 mm, height of headstock axis above table 130 mm, spindle taper of workhead MK5, horizontal rotation angle 360°, vertical rotation angle 360°, spindle speed 3244/6488 rpm, vertical movement 350 mm, motor feed speed 1.2 m/min, Basic diameter of the wheel for tool sharpening 175 mm, for surface grinding 200 mm, longitudinal path of the table 550 mm, cross slide 250 mm, clamping width of the table 140 mm, clamping length of the table 1000 mm, angle of rotation of the upper table 45° +/-, incl. extensive accessories Approx. Onsite Dimension. (l x w x h): 2,000 x 3,000 x 2,000 mm, weight approx.: 2,000 kg
used
Tenoning spindle: 1 Stk. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 for window and door production with 50 mm spindles in the longitudinal profiling. With the following processing stations and options: - One-sided slot machine for straight and sloping connections - Milling machine with glazing bead cutting unit for longitudinal profiling - Circumferential operation with synchronous milling unit and automatic immersion. - Swivel frame support up to 650 mm - Fitting grooving unit - Central control 1.0 crosscut saw automatically plunging in from above - Engine power, including engine brake 3.0 kW - Spindle speed 2800 rpm. - Flight circle diameter 350 mm - Spindle diameter 30 mm Æ - Clamping flange, 1 driver 6 mm Æ TC 42 mm 120 mm dia. - Pneumatic vertical stroke 100 mm - Pneumatic horizontal stroke 160 mm against 2 manual 6-fold turret stops - Chip extraction hood wit ...
used
Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...
Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley
used
! Needed! FP 4NC SK40 / dialog 4 contouring Control: CNC dialogue 4 - 3D contouring speed: 25-3150 RPM Feed: 1-3600 mm / min stepless Rapid traverse rate: 4 m / min Drive performance: 2,0 / 4,0 kW 1430 / 2830 RPM Travel: X/Y/Z 560/450/450 mm Angle table: Solid angle table 530 x 900 mm of maximum capacity 450 kg Version: Vertical & horizontal spindle; Vertical Quill 80 mm extendable Splash Guard cabin; Milling head manually swiveling options: machine light / E Handwheel / NC rotary table / dividing head, etc.
used
1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min
used
Cat No. 16-00137 in a very good condition Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upper body: · filling connection DN 50 central in the upper bottom, 2 sleeves 3/8”, 1 flange piece NW 25, 1 flange connection NW 80 Tank body: · with ladder hook up · with Manhole oval 450 x 350 mm swiveling · with downwa ...
used
Cat.-No. 16-00152 in a very good condition Measurement and Weight: Total Length: 7200 mm Cyl.Length approx. 6000 mm Diameter: 2400 mm Weight: approx. 4.550 kg Uni 6450 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Tank lining: EMS 227 Operating temperature -10/+50°C Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 9 mm wall thickness. Tank upper body: · 1 flange DN 25 Tank front: · with manhole oval up front 430 x 350 mm swivelling with holder · with pressure valve with manometer, with overpressure safety valve, connection DN 15 · with temperature sensor · with level indicator flanged 100 mm · with clear outlet with angle seat valve DN 50 flanged 135 mm · with agitator (380V 1,1 kW, 1400 U/min 50 Hz) flanged NW 150 mm · with rest outlet DN 50 with an ...
used
1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
used
1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min
used
1 plant be certified, very well received. Single girder overhead travelling crane with angle trolley Load approx. 5,000 kg Wingspan approx. 16.750 mm hook path maximum approx. 8,000 mm Make VOITH Year of production/workshop test 1993/2016 equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation including load beam, with frequency control, maintenance Jetty, radio control Working speeds: Hoist up to 20.0 m / min Trolley gear up to approx. 26.0 m / min Crane chassis up to approx. 90.0 m / min
used
1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min
used
Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg
used
Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...
used
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank with red food safe munkadur coating with cooling jacket and with isolation With new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 8.000 Litre Measurement and Weight: Total Height: 4900 mm Tank Body Height: 3625 mm Diameter: 1900 mm Weight: 2100 kg Uni 4850 Operating-overpressure: 8 bar, Test pressure: 10,4 bar Operating temperature: -10 +40 °C Year of construction: 2000 Lining: Akorrosit EL 15 p” On cylindrical part two cooling jacket, test pressure 2 bar, depressurizes, 5,8 m2 cooling surface Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms and jacket 8 mm wall thickness. Container outside completely isolated with ...
used
Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...
used
Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 11.500 Litre Measurement and Weight: Total Height: 4450 mm Tank Body Height: 4000 mm Diameter: 2250 mm Weight: 3400 kg Uni 4950 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure double jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Bottoms wall thickness and jacket wall thickness inside container 11 mm. On cylindrical part of a cooling jacket about 2,30 m high as double jacket. Container outside approx. 100 mm isolated, with scre ...
used
Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...
used
Storage tanks, steel tanks without pressure 5,000l Tanks no. 42, 43, 44, 45, 46, 47, 48, 49, 51 UNI-OFF Measurement and Weight: Total Height: 3500 mm Cyl. Height: 2550 mm Diameter inside: 1480 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 3 feet height adjustable - with rest outlet DN 65 (angle seat valve)
used
Storage tanks, steel tanks without pressure 10,000l Tanks no. 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41 UNI-OFF Measurement and Weight: Total Height: 3900 mm Cyl. Height: 2900 mm Diameter inside: 1980 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)
used
Storage tanks, steel tanks without pressure 15,000l Tanks no. 52, 53, 54 UNI-OFF Measurement and Weight: Total Height: 4120 mm Cyl. Height: 2950 mm Diameter inside: 2380 mm Year: 1973 Surface: Lining: Munkadur- food-safe color inspection Outside: lackered Material: steel Upper body: - With dished bottom - With the spund pipe pulled down DN 32 Cylinder tank: - with holder by side - with sample valve DN 20 - with manhole oval - with clear outlet DN 40 (angle seat valve) - with level indicator with bar and scale Lover bottom: - with dished bottom - with 4 feet height adjustable - with rest outlet DN 65 (angle seat valve)
Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t
used
Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² Ã? 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control
used
new, unused Right Angle Shaft Double Stage Reduction Horizontal rotating NE23BRN4 N (reducer with series N compact housing solid shaft) E (Size E) 2 (Double Stage Reduction) 3 (with right angle horizontal shafts) BRN (indicates the assembly arrangement shaft arrangement) 4 (nominal ratio) 71 kW n1 750 u/min n2 187,5 u/min
used
<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt conveyor Specification no.: U1009424-V0091 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 Förderhöhendiff.: 500mm <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.
used
<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.
new
Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG ...
used
Storage Tank in AISI 304 with flat bottom 3% floor slope up and 3% floor slope down - Volume: 26.200 Litre used – in very good condition · Material: AISI 304, Side Marbled, Inside 2B = IIIC · with Manhole oval on the front withdrawn 400 x 300 mm · with fermentation lock · with ladder hook · with sample valve · with level indicator with bar and scale · with outlet discharge with angle seat valve DN 50 with cap · with clear trigger with angle seat valve DN 50 with cap Measurements and Weight: Height: 4550 mm Diameter: 2750 mm Weight: 1350 kg
new
Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20
new
Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm
used
HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA
used
HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA
used
Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Max. grinding length: 450 mm Max. clamping length: 1055 mm Max. work piece diameter: 250 mm Thread diameter: min.: 2 mm max: 250 mm Workpiece spindle bore: 45 mm Workpiece weight on centres max.: 200 kg Thread pitch: min.: 0.3 mm max: 100 mm Max. angle pitch +: 40 ° Max. angle pitch -: 40 ° max. module: 10 Grinding wheels: Diameter: min.: 280 mm max: 350 mm Width: min.: 3.5 mm max: 40 mm Bore: 40 mm Grinding-wheel speeds: number (steps): 6 from: 1700 rpm up to: 2540 rpm Work-piece spindle head speed: number (steps): 27 from: 0.4 rpm up to: 160 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.4 kW Total power required: 15 kVA Machine´s weight about: 4700 kg Overall dimensions machine: Length: 3300 mm Width: 1930 mm Height: 1800 mm Various accessories: Coolant syst ...
new
Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)
used
Spiral drill grinding machine Offer number: 20063 Make: SCHANBACHER Type: S 3-50 Machine Number: 92-2083 Built: 1992 Technical data: - Easy to use - Grinding process by means of gearmotor - Spiral drill dimensions 3 - 50 mm - Angle 90 - 140° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gearmotor for swivel movement 400 V / 0.12 kW - Grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - Clamping device - Presetting device
new
Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead ...
new
CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg
new
CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg
new
CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg
new
Hydraulic sheet metal shears in backdrop cutting design with NC - controlled rear stop - manual cutting angle adjustment and hydraulic cutting gap adjustment, maximum cutting length 3,020 mm, maximum cutting capacity 8 mm steel sheet/ST40, cutting angle 0.5° to 2° NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections deeper than 1,000 mm - optionally available with a foldable sheet metal support at the rear stop or a conveyor belt with high-stop strips, drive power 11.5 kW, dimensions 3.6 x 1.2 m, weight approx. 7,600 kg
used
specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg