133,872 used machines on RESALE, but how to find them? Machine Search
Dough dividing and rounding machine Lippelt SVI-4DA Year of manufacture: 2018 Dough funnel with pre-portioner approx. 130 kg Dough capacity Head machine 4-row Weighing pistons for small and large weights Weight range small: 50-80 g Weight range large: 70-115 g Touch control Siemens PLC With program memory Spreader belts with adjustable spreading width Spreading belt flouring With lubrication for rose buns
Dough divider and rounder WP Multimatic MUS 6 Year of Make: 2017 Condition: repaired 6-row head machine Dough yield of 148 ? 160 % Weight range: 35-85g Volumetric flask diameter: 50 mm Hourly output from 600 to 2000 pieces per row Max. hourly output: 12,000 pieces Adjustable working and working speed Weight adjustment by hand crank Spreader belts foldable for double pieces Dough throw-in height: 185 cm Dough funnel with safety bar Incl. 1 knitting drum ? at your choice, subject to availability Optional: Double piston for smaller weights up to 25g, additional knitting drum for various
Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30-100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production
Water mixing and dosing device Langheinz Aquamix 32 Fully automatic water mixing and dosing unit with three inlets, demand-controlled flow and numerical input keypad Condition: new sealing rings, dirt screen and battery. Maintenance carried out. for connection to the drinking water network Intrinsically safe according to DVGW for mixing and dosing ice, city and hot water with automatically controlled flow that can be switched off Automatic Repeat and Partial Repeat numeric keypad 0-9 Housing material AISI 1,403 with 3 water temperature inlets
Dough divider and rounder Fortuna Primus Pro 6 Year of Make: 2015 Condition: cleaned and tested 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Weight range: 40-100g Touchscreen control with recipe memory With flour and pressure roller at the outlet Adjustment of the weight and the effective chamber height via hand crank Machine on rollers, mobile with brake
2x 2-stone grinder \"Huvema\" and \"Scantool\" and 1 disc sander \"Zimmermann\" type S2P 845, 380 volt Auction-ID: A1-43894-83
Bag filling and sealing machine Rianta PS Mako BFS 300 Year of Make: 2020 Condition: cleaned & tested Suitable for 2-core paper or plastic clip tape, 8mm wide, wire diameter. 0.6-0.8mm Capacity: 35 packs/min (depending on product) Max. product dimensions (LxWxH): 450 x 230 x 140 mm Air blower to open the bags Date Printer Incl. inclined conveyor belt, type: SF 1500
Including gloves, loctite, lamps, fuses, etc, including cabinet Auction-ID: A1-43894-73
Dough divider and rounder WP Multimatic MUC 5 Year of Make: 1994 Condition: Dough chamber overhauled, immediately ready for use Type: MUC 5-row Weight adjustment by handwheel Weight range: 30 to 90 g Incl. 1 chamber drum of your choice and availability Capacity: 600 to 2000 pieces/h per row (depending on dough type and weight) Individual pistons can be locked for e.g. 4-row operation
On 3 pallets, in various sizes including thickness 50/75/100 mm Auction-ID: A1-43894-41
Dough Divider and Rounder King Mini Rex Multi Year of Make: 2012 Condition: cleaned & checked, maintenance carried out Roller hopper up to approx. 15 kg dough capacity Removable components for easier cleaning Simple control via microcontroller via touch panel Different weight ranges due to easy and safe replacement of the weighing drum bars Single to four-row operation Maximum hourly output of 1200 ? 4800 pieces per hour Extremely wide weight range: 8 ? 330 g (different stamp sizes required) Incl. stamp size SK58, weight range: 30-80g,
Dough divider and rounder King Grande Rex T3 Year of Make: 2021 Condition: cleaned & tested Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Stamp size SK 95 Weight range: 135 to 320 g
Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coa ...
Pastries and croissants Rondo TOP LINE Suitable for the production of filled and unfilled croissants, puff pastry products such as cinnamon rolls and other stuffed baked goods. Available now! Laminating line (YOC: 2005) consisting of: Dough hopper/pre-portioner Dough Sheet Former Grease pump (year of manufacture: 2007) Conveyor belt with folding belts Satellite Head 1 Folding station Satellite Head 2 Cross roller Calibration Roller Transfer wristbands to the croissant section Conveyor belt with cutting rollers and spraying station Pneumatic 6 Piston Filler Guillotine Depositing device for sheet metal Incl.
Key data: 20 KW, 400 V
Viessmann Gas-CHP Vitobloc 200 EM 20/39 Gas, electricity and heat generator, built in 2015, 63,264 operating hours. 20 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 42.3VS2 C 6/4, 27 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 20/39 Type: Gas Electricity and Heat Generator Serial Number: – Power [KWel]: 20 Power [KWth]: 39 Voltage [V]: 400 Current [A]: 39 Frequency [Hz]: 50 Year of Make: 2015 Hours: 63,264 Weight unit [kg]: 800 Dimensions LxWxH [m]: 2.25 x 0.90 x 1.50
ATLAS COPCO GA 26 VSD FF – Screw Compressor General data: Manufacturer: Atlas Copco Model: GA 26 VSD FF Machine type: Screw compressor with integrated air dryer and heat exchanger Year of manufacture: 2010 Operating hours: approx. 60000 h Weight: approx. 590 kg Dimensions (L x W x H): approx. 1200 x 1800 x 1500 mm Technical details: Rated power: 26 kW Working pressure: 12.8 bar Drive type: Inverter (VSD – Variable Speed Drive) Integrated air dryer: yes Integrated heat exchanger: yes Description: Industrial screw compressor Atlas Copco GA 26 VSD FF equipped with inverter drive technology for energy-efficient operation. The unit includes an integrated air dryer and heat exchanger, ensuring high-quality compressed air supply and optimized performance for industrial applications. Auction-ID: A7-47066-17
Manufacturer: Geka (Maquinaria Geka S.A., Spain) Model: HYD 110 CNC controller: Inter Imex PT 500 Year of manufacture: 1997 Serial number: 16306 Machine type: Hydraulic punching and shearing machine (steelworker) Max. punching force: 110 t Throat depth: 250 mm Strokes per minute (20 mm stroke): 37 /min Punching capacity (hole Ø x thickness): 40 x 10 mm Notching capacity: 10 mm Flat steel capacity: 300 x 15 mm or 200 x 20 mm Angle steel capacity 90°: 120 x 120 x 10 mm Angle steel capacity 45°: 70 x 70 x 7 mm Round bar capacity: Ø 40 mm Square bar capacity: 40 mm Operation modes: Manual / Automatic Functions: Punching, flat bar shearing, angle shearing, notching, bar cutting Emergency stop: Yes Condition: Used, industrial condition, signs of wear consistent with age Remarks: Hydraulic ironworker with CNC positioning control via Inter Imex PT ...
Type: Oil-free piston compressor Model: Kaeser AIRBOX CENTRE 550 with integrated dryer & air receiver Rated power: 3 kW Air flow: 255 l/min Max. pressure: 10 bar Working hours: 2811 h (2533 h under load) YoM: 2014 Pump: Replaced with new unit in 2021 Last service: Kaeser C-Service on 06.10.2022 Maintenance: Regularly serviced Features: Integrated dryer, receiver tank, IE3 motor, refrigeration dryer (dew point +5 °C), oil-free operation Dimensions (D x W x H): 1730 x 820 x 1640 mm Weight: 550 kg ⚠️ Service manual not available. Please view the test video linked with the lot. Auction-ID: A7-47066-14
Overview This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to ...
x-travel: 1000 mm y-travel: 330 mm z-travel: 500 mm table-size: 1300 x 280 mm turning speed range: 30- 1500 U/min power requirement: 2,5 kW tool adaptor: ISO 40 | feed speeds: 13- 620 mm/min | weight: 2,1 t range L-W-H: 2,0 x 1,5 x 1,9 m Universal tool room machine with digital scale - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer two used storage containers. Overall height: 1980 mm Diameter:625 mm Capacity: approx. 300-350l
Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement.
Offered is a CNC-controlled drilling and insertion machine. Workpiece size max.: 1350mm x 600mm x 25mm, operating pressure: 6-7bar, extraction speed: 32m/s, working height: 1000mm, control system: Ferrocontrol. Equipped with two-station machine for alternating loading, feed system for workpieces, vibratory feeder with sound-insulating hood for hinges, drilling and insertion unit, control cabinet, extraction collector. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 6240mm/4500mm/2200mm. Inspection possible by arrangement.
Auction-ID: A1-46873-107
Auction-ID: A1-46873-133
the lathe chisels are unused, the blackening of the surface is not rust but oil/grease. Auction-ID: A7-47109-190
Also Mapal, all the boxes are filled Auction-ID: A7-47109-22
Inserts are unused Auction-ID: A7-47109-39
Incl. NC drill, countersink etc. Partly unused Auction-ID: A7-47109-57
With DGA33 control indicator, With unloader, Bowl: 120 liter, Speeds: 2 on knife, 2 on bowl, 2 mixing speeds, Power: 3 x 400V, 50Hz, 97A, Dimensions: 2050 x 1250 x 1250 mm, Weight: 1385 kg
HANDTMANN VF-620/VF-628/VF-630
Including Alpha Machine Vision Solution lid inspection system, Including tool trolley, Capacity: 18000 - 22000 cups/hr, Cups: round à 55 mm, round à 65 mm, Seal: aluminium, Compressed air: 6 Bar, 800 l/min., Water: 3 Bar, 1.5 l/min., Power: 3 x 400V, 50Hz, 15kW, Dimensions: 4250 x 2000 x 1800 mm, Weight: 3500 kg
Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.
For sale is a high-quality CNC turning-milling center spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Sub-spindle powered tools Chip conveyor extensive tool package Technical data: Bar passage 77 mm 12-speed VDI50 turret Main spindle ASA 8 Sub-spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and sub-spindle Weight approx. 6000–7000 kg Nloc Egsy Uwmws S Rrgob
Key data: 420 KW, 400 V
Kuntschar und Schlüter (Wolf) Gas CHP GTK 382K Gas electricity and heat generators from 2013, 64,000 operating hours, with control, cooling and two silencers. Engine in need of overhaul. 382 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 355MA4-B, 680 KVA Manufacturer: Kuntschar and Schlüter (Wolf) Model: GTK 382K Type: Gas CHP Serial Number: 0094 Power [KWel]: 382 Engine: MAN E2842LE322 Engine power [KW]: 420 Year of Make: 2010 Hours: 64,000 MarelliGenerators MJB 355MA4-B AC Generator Manufacturer: MarelliGenerators Model No.: MJB 355MA4-B Type: AC Synchronous Generator Serial Number: MJB3532L014M0 Power [KVA]: 680 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 981 Speed [1/min]: 1,500 Year of Make: 2013 Weight [kg]: 1.780
Payload: 230 kg; Power: 250 W; Dimensions in cm; No nameplate available; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for the condition and functionality of the lot; Auction-ID: A1-47184-114
Consisting of feed roller conveyor with brush unit and pressure roller (size 320x100x135 cm); conveyor belt with 3 pad units (Ø 400 mm), brush (Ø 180 mm) and LED drying unit (size 350x115x217 cm) and power box with control; including roller conveyor 240x45x105 cm and manuals; This lot is part of Eindcombinatie Kavel 14 Auction-ID: A1-44305-13
Equipped with digital readout, interchangeable blades, various flanges, manuals and flexible hose/tubes up to aa; the ceiling; power 32kW, working pressure compressed air 6 bar, cutter Ø 125 mm, Saw Ø 400 mm, minimum length 200 mm, maximum length 3000 mm, minimum width 50 mm, maximum width 280 mm, minimum thickness 14 mm, maximum thickness 30 mm; including elevator belt Auction-ID: A1-44305-11
Payload: 230 kg; Power: 250 W; Including 2x batteries, charger and docking station ; Dimensions in cm; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for the condition and functionality of the lot; Auction-ID: A1-47184-311
maximum number of results exceeded
please refine your search
10 € 
