an used for sale

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

Offer 25348 Technical data: - 15 pieces 300 x 200 x 100 mm - left + right versions - Total weight approx. 250 kg

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa  ...

2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V  ...

A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.

Rated power: 20 kW, voltage: 400 V AC, includes a silo. On-site viewing is available, the system is fully operational.

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...

Well-maintained 90 litre cutter in stainless steel. Stepless speed, reverse mixing gear,

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC controls NUM 1060 WORKING RANGE TURNING   swing diameter (max): 2000 mm   workpiece weight max.: 25000 kg CROSS BEAM SLIDE   - rotation speeds (min): 2 /min   - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4100 mm   space requirements -front/back-: 3500 mm   total height: 5600 mm

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rex vacuum Filler -Type: RVF 736 -Power: 15 kW -Capacity: 3600 kg/h -Serving speed: up to 800 portions/min -Portion range: 5-9999.9 grams -Operated hours: 29337 -Linking and holding device included -Additional funnels included -With loading -Dimensions: 2100 x 1230 x 1950 mm -Power supply: 400V 50Hz 3Ph -Condition: Used in very good condition, ready to work

Key data: 26 KW, 230 V

Viessmann Gas/LPG Sterling Micro-CHP Vitotwin 300-W CH3HC-26 Gas/liquefied petroleum gas sterling micro-CHP electricity and heat generator from 2014, unknown operating hours, with 800 l accumulator and new spare parts (control board, condenser, air distribution valve, gear motor). 1.0 KWel, 230 V / 50 Hz. Manufacturer: Viessmann Model: Vitotwin 300-W CH3HC – 26 Type: Gas and LPG Sterling Micro CHP Heat output (TV/TR 50/30 °C) [kWth] 3.6–26.0 Heat output (TV/TR 80/60 °C) [kWth] 3.2–24.6 Electr. Output (gross) [kWel] 1 Serial Number: 7369298401232109 Engine: microgen linear free piston sterling engine Engine power [KWel]: 1 Year of Make: 2014 Operating hours: unknown Weight [kg]: 230 Dimensions LxWxH [m]: 0.50 x 0.50 x 1.00

Technical details Speed:?6000 Bottles/hour Products:?Wine (Still) Containers:?Glass, PET Formats:?0.187 L PET bottle Safety features:?Yes Manuals:?Yes Fill type:?Gravity/light depression Neck type:?22 mm Consisting of: - Conveyors?Conpart The line ensures seamless movement of bottles using conveyors with suction systems, stabilizing each bottle while maintaining a nominal capacity of 7200 bottles per hour. Filling Monoblock Euro Star LDG24-24-4V, Year 2014 - Operates with a rinser / blower equipped with 24 clamps, enabling a secure grip on the bottle neck. The injection system prevents fluid flow when bottles are absent. - Fills wine using 24 stainless steel spouts, which manage slight vacuum and inert gas overpressure to maintain ideal filling conditions. As a result, the conical-bottomed tank ensures complete product discharge at the end of each cycle. Labeling Machine?Conpart?Arco M2 ...

A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible.

Capsule type: champagne cap folding capacity / hour ca.: 3000 working direction: left-right Working type: fullautomatic Dim. L x W x H [m]: 1,40 amount of capping heads: 3 electrical power supply kW: 380

A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026.

The offer includes this \"Macrolot\" of movable property: including machinery and various equipment with a price of departure: 51.800,00€ please refer to the inventory attached to the notice of sale and to this auction- The lots included refer to inventory no. 1 to 3; 5 to 14. The numbering shown is respected in the photographic order of this lot. In order to submit a bid on this lot, a deposit of € 5180 is required. To receive the bank details necessary for the transfer, please contact the auction contact person at matteo.tosin@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Please read carefully the procedures described in the attached notice of sale and follow the instructions as participation in the auction implies their full and unconditional acceptance. Auction-ID: A7- ...

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

including speed regulator and a foot. Without belt. 0,75 Kw

Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8

incl. dispenser Working direction: left-right Number available (price per tank): 1 Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 4000 working direction: rotating turret, left-right Working type: fullautomatic amount of capping heads: 4

25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998)?with screw cap feeding

Double jacket, Tiltable drum, Incl. Berief L25 lifter for 200L eurobins, Capacity: 1600 litres, Heating: steam, max. 10 bar, Power: 3 x 400V, 50Hz, Dimensions: 4000 x 2000 x 2300 mm

Description: With touch screen control, Operating system: Windows, Protection: IP65, Power: 100-240VAC, 50-60Hz, 2A, Dimensions: 600 x 420 x 800 mm, Weight: 56 kg

DC-1 is designed to automate and simplify microscopic differential blood counts in low-throughput laboratories. The system uses high-speed robotics and digital imaging of artificial neural network technology to automatically locate and capture high-quality images of cells. It enables both stand-alone and laboratory network installations. WBC, RBC and PLT cell images are stored in a database together with the results of the differential analysis. Manufacturer: Sysmex / CellaVision Model: CellaVision DC-1 Year of Manufacture: 2022 Type: Automated digital cell morphology analyser Technical Specifications - Dimensions (W x D x H): 280 x 390 x 370 mm - Weight: 11.0 kg - Capacity: 1 slide - Immersion oil application: Manual - Analysis: 17 WBC classes, 6 RBC abnormalities, PLT estimation - Throughput: Up to 15 slides per hour (based on 100 WBC differential, RBC morphology and PLT - estima ...

CONTROLS   CNC controls FANUC BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1   number of b-axes: 1 WORKING RANGE TURNING   bar diameter (max): 50 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 11 kW   spindle bore diameter: 50 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power: 7.5 kW   c-axis: yes   Z-axis travel: 465 mm X/Z SLIDE   tool fixture: Turret   number of tool positions (total): 24   number of live positions: 24   - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4500 mm   space requirements -front/back-: 2200 mm   total height: 1900 mm   total weight approx.: 5500 kg ATTA ...

A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible.

x-travel: 500 mm y-travel: 360 mm z-travel: 400 mm Control: Siemens 810 tool taper: SK 40 table surface area: 800x390 mm T-slot - width: 14H7 mm number of T-slots: 6 T-slot - distance: 63 mm turning speeds: 20-4000 U/min transmission ratio: 4 Feed: 1-2000 mm/min rapid traverse: 5 m/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5x2,9x1,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appoint ...

CIP cleaning, extra long infeed conveyor of 2000 mm, Belt width: 1000 mm, Frying length: 9000 mm, Heating: Thermal oil, 360 kW, Steam: 4 - 8 Bar, Compressed air: 2 - 4 Bar, Power: 3 x 400V, 50Hz, 30kW, Dimensions: 12600 x 2100 x 3400 mm, Weight: 10000 kg

Key data: 150 KW, 140 kVA, 400 V

Viessmann Gas CHP Vitobloc 200 EM 140/207 Gas electricity and heat generators from 2016, 69,200 operating hours, with control, heat exchanger and silencer. 140 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 44.2L12C 6/4, 165 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 140/207 Type: Gas CHP Serial Number: 7411151 5 03073 105 Power [KWel]: 140 Voltage [V]: 400 Current [A]: 238 Frequency [Hz]: 50 Engine: MAN E2876E312 Motor power [KW]: 150 AC Generator: Leroy Somer LSA 44.2L12C 6/4 Power [KVA]: 165 Year of Make: 2012 Hours: 69,200 Weight unit [kg]: 3,420 Dimensions LxWxH [m]: 4.45 x 0.95 x 1.73

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 2004 Anilox roller with 90 lines/cm as good as new condition suitable for Heidelberg SM Delivery date: immediately from stock

Used beer bottling line from FRAMAX GENERAL INFORMATION • Manufacturer: Framax (Italy) • Year of manufacture: 2013 • Robotic packaging system: Universal Robots, integrated in 2018 • The line is still in production • Available for inspection SPECIFICATIONS • Capacity: 1200 bottles per hour (for 250ml bottles) • Production flow: approx. 1250 liters/hour • Format 250ml-750ml (depending on bottle dimensions) • 18 rinsing stations • 18 filling stations • 6 ROPP locking stations • 6 crown locking stations • Bowl size: 120 liters EQUIPMENT INCLUDED • Glass bottle feeding system • Scrubber • Filler • Bottle dryer • Labeling machine • Robotic carton packing station

1 semi-hard cheese dairy plant for non-pressed semi-hard cheese such as Tilsiter cheese Moulds and drain tables for approx. 55,000 l of cheese dairy milk per shift are available with 1 cheese curd - whey rotary drum de-whey with 10 curd melting vats, space for a total of 10 cheese curds. 1,150 Performa cheese bread molds

Overview Generic Android Smartphone (OEM) in green, with high capacity configuration as indicated on the box, presented in its original packaging. Technical details - Configuration: 16 GB RAM + 1 TB storage (as per box labeling) - SIM: Dual SIM slot - Display: Waterdrop notch - Rear camera: Triple module (decorative design with large lens) - Front camera: Integrated into the screen - Connectivity: 4G LTE (estimated by device type) - Ports: USB charging port, SIM tray - System: Probably Android (generic OEM) - Color: Green Included Accessories - Original box - Internal tray - Documentation - Screen protector applied Status and location Apparent new condition or with minimal use – sold as-is, without warranty. Auction-ID: A7-45941-33

Cuoghi LTW mixing plant on slide, production up to 30 mc/h, consisting of hopper with scale for powder dosing, loading auger, high-speed mixer capacity 1.0 mc, agitator capacity 2.5 mc, vertical injector adjustable flow max 120 lt/min and adjustable pressure max 120 bar, air system with 200 lt compressor and motorized pneumatic valves, Control Cabin.

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 € : 848.04 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7,5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm ...

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 455 mm turning diameter over slide rest: 285 mm turning length: 1.000 mm center height over bed: 225 mm centre distance: 1.000 mm digital readout: 2-Achsen ANILAM bed width: 330 mm spindle taper: KK 6 DIN 55027 spindle bore: 45 mm turning speed range: 16 - 1.000 U/min power requirement: 3,0 / 4,2 kW taper in tailstock-quill: MK 4 dia. of quill: 62 mm quill stroke: 145 mm coolant: voltage: 400 V total power requirement: 4,5 kW weight of the machine ca.: 1,95 t dimensions of the machine ca.: 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR The data for this ad was created with ModulMWS - the sof ...

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

height: 1000 mm width: 750 mm depth: 500 mm T-slot - width: 22/40 mm T-slot - distance: 170 mm number of T-slots: 5 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software soluti ...