an used for sale

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

TECHNICAL DATA: Usable width: 400 mm Installed power: 1.5 hp

Fiberlite F18-8x50cy Fixed Angle Rotor THERMO SCIENTIFIC New equipment in its original packaging Thermo reference: 75003663 Capacity: 8 x 50ml Max. speed: 14,500 rpm FCR Max: 24.446 ×g Compatible with the following models: Thermo Scientific Sorvall Legend XT/XF Centrifuges, Sorvall Legend X1, Multifuge X3/X3F, Multifuge X1 and SL 40F

NETZSCH TG 209 F1 Iris Thermo-Microbalance - Thermogravimetric Analysis Without a computer without software cable-free Untested equipment

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

Machine name: Combined heat and power plant used Manufacturer: SEnergie GmbH Type: G6.12TI Year of Make: 2008 Generator: NEWAGE STAMFORD Generator Type: UC. I274D2 Generator kW: 100 kW Fuel Type: Sewage Gas Electrical power: 80 kW Thermal power: 123 kW Efficiency: 88.9% Dimensions: L 3,500 x W 1,100 x H 2,500 mm Curb weight: 3,000 kg Tech. Documentation: Yes Note: In 2018, a new engine was installed and the generator was rewound. Last service 15.10.2021 at 86,102 h Accessories: A control cabinet Condition: Used Price: On request

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

Used line for bottling juices into Tetra Rex cartons. 7.000 pcs/h Specifications: Tetra Rex Filling Machine: Type: Tetra Pak TR/27 Year of manufacture: 2016.11. Capacity: 7000 pcs/h Formats: 1 l, 0.5 l 2 Tray Making Machine: Type: Cardboard Packer 32 by Tetra Pak Year of manufacture: 2016.10. Formats: 23, 43 Conveyor 2: Type: Conveyor Control System Year of manufacture: 2016.10.

2 pieces of natural gas CHP in container Engine: Jenbacher J420 Engine version: B25 Power each: 1339 kW at altitude 1900 meters, at NN the power is 100 kW higher! Year: 2013 Generator: Leroy Somer LSA 52.2 L70 4P with 1970 kVA power Voltage: 400 V Hours: 13200 and 15600 The power generators were regularly serviced and checked. The systems are dismantled and immediately available. Subject to prior sale - errors possible! Internal reference number: E-1004-114

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg

plate thickness: 4,0 mm roll diameter: ca. 120 mm throat: 450 mm total power requirement: kW weight of the machine ca.: 0,48 t dimensions of the machine ca.: 1,3 x 0,8 x 1,8 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CMT Cheese Stretching and Moulding Line . CMT FL 1400 / Boilers/ Tanks/ Moulding / Extruding . CMT Cheese Cooking, Stretching and Moulding Line Screw Hopper for Cheese Transfer Moulding Machine with 2 Sets of Moulds Boiler and Hot Water Tanks Control Panel Manual Book Technical Manual Condition : Good Location :, Use: Cheese Cooking, Stretching and Moulding

Description: For sale is a solid and well-kept detached house in a very good, central location of Selva. The property convinces with a stable building fabric, continuously carried out modernizations and an easily usable plot of approx. 580 m². Ideally suited for families, couples, retirees or as a stable investment. Your highlights at a glance - Living space: approx. 108 m² (purely residential) - Property: approx. 580 m² - versatile use - Condition: well-maintained & continuously modernized - Energy certificate: available and will be sent with the exposé - Parking: 3 outdoor parking spaces directly at the house Major modernizations (partially / renewed in recent years) - Roof - Heating system - Sanitary areas - Electrical installation - High-quality 3-fold glazed plastic windows House interior painted by specialist company in 2025 All wall mounted radiato ...

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Cooking kettle Kerres FKK 250L, Natural gas heated, power 12kW, el. Connection 230V, Dimensions of kettle inside approx. 69x80x46cm, Total dimensions LxWxH approx. 95x125x118cm, weight approx. 344kg, older device, good used condition, functional, lid spring defective

A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible.

Key data: 997 KW, 1222 kVA, 400 V

For sale is a used gas generator of the brand Gastechnik with Deutz MWM TBG 620 V16 engine with accessories. The accessories consist of: 4 control cabinets. Gas line. Heat exchanger. Electric pump etc. Power: 1222 kVA / 997 kW Year of Make: 1998 Nominal voltage: 400/231 V Frequency: 50 Hz COS φ: 0.8 Generator: Stamford HC.1734F2-CG (Newage) Weight: approx. 10,000 kg

HUBER CC303 Polystat CC3 Bath and Circulation Heating Thermostat CC 303 Circulation Water Bath with CC3 Thermostat Working temperature: 55...300°C with cooling device: -20...300°C Dimensions (W x D x H): 335 x 382 x 433 mm Net weight: 22 kg Max. delivery power: 25 l/min; 0,7 Max. suction power: 18.5; 0.4 bar This model has been replaced by the CCx-315B vpc model

Punching capacity: 220 kN laser capacity in Watt: 4000 travel -x axis: 3050 mm travel -y axis: 1550 mm Cutting capacity structural steel: 8 mm Cutting capacity stainless steel: 8 mm Cutting capacity aluminum: 6 mm workpiece weight: 280 kg weight of the machine ca.: 24.000 kg dimensions: 10130 x 8898 x 2328 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A used Rego Herlitzius Kobold Bread Gate 9mm is currently for sale and immediately available. Rego Herlitzius - Creel machine - on castors - with lubrication - Cutting machine 9mm - for max. 42cm loaves of bread Technical data: - Manufacturer. HERLITZIUS - Model: Leprechaun - Year of construction: 2005 - Power: 0.75 kW - Nominal voltage: 230 V 50 Hz Dimensions: Width: approx. 61cm Depth: approx. 68cm Height: approx. 120cm

Waldner Dosomat 16, rotary, 6-head filling machine for aseptic filling of cups. Capacity: up to approx. 9.000 cups/hour. 3x Format sets: round 95 mm, square 65x65 mm and square 95x95 mm. Format change in the shortest possible time by the tool-free exchange of quick-change format plates, push-in cup destackers and lid magazines allow immediate response to the daily market requirements and to the realisation of strategic decisions in terms of cup design changes., Working principle:, - Automatic cup de-stacking storage buffer magazine for ± 15 minutes buffer (preformed cups)., - Cup de-stacking station., - Cup sterilisation using H2O2 and hot sterile air. All the necessary valves and lines are situated in a sterile module next to the machine. The cups passing through it are subjected to sterile air enriched with H2O2 and then finally dried with hot sterile air. In this way, especially moul ...

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right

Applied Biosystems Hitachi 3130XL Genetic Analyzer 16-capillary electrophoresis instruments for medium-throughput laboratories. It is fully automated, from polymer loading and replacement to DNA data separation, detection, and analysis. Technical specifications: Voltage: 220-240 V External dimensions (W) x D x H: 74 x 51 x 82 cm Untested equipment, without a computer

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

turning diameter over bed: 330 mm turning diameter over slide rest: 165 mm turning length: 800 mm total power requirement: 3 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 2 x 1 x 1,5 m No. 1009 Lathe WEILER LZ-300 Speed range 24-2800 1/min. Feed rates 0.013-1.27 mm/min Space requirement approx. 19 0x 700 mm, Weight approx. 700 kg. The e-lead spindle is removed from the machine 3-jaw chuck, collet quick-clamping device with various collets, 1 tool cabinet with various accessories tool cabinet with various accessories. Working area: 165 x 600 Drive: 3 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 450 mm z-travel: 450 mm table surface area: 1370 x 400 mm number of T-slots: 5 Stck. spindle turning speed range: 32 - 1500 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 50 total power requirement: 7,0 kW weight of the machine ca.: 3,1 t dimensions: 2,1 x 1,7 x 1,9 m Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydraulic tool cutting - Coolant system - Central lubrication The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 896 mm Boring depth max.: 65 mm Motor output: 2x1,5 kW Overall size: 1122x1040x1250 mm Weight: 380 kg Number of boring spindles: 29 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 1088 mm Boring depth max.: 85 mm Motor output: 2x1,5 kW Overall size: 1320x1040x1250 mm Weight: kg Number of boring spindles: St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pitch: 32 mm Working width: 704 mm Boring depth max.: 70 mm Motor output: 1,5 kW Weight: 310 kg Number of boring spindles: 23 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PFP Anvil with saucer, unhewn. Weight approx. 80 kilos. see photos

Tetra Pak's CAP 30 Flex is an optimal closure solution for attaching the cap to your container. The CAP 30 Flex is set to 1000 Slim HeliCap 23.

The Tetra Pak TBA/8 110V is a proven aseptic linear filling machine for liquid foodstuffs, which is particularly known for its reliability. It is often used in dairies for UHT milk, juices or similar products.

For many years, the TCAP 45 has been considered one of the preferred closure variants for one litre Prisma packs. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. These newer closures automatically cut through the "pre-punched" layer of the pack when opened. Easy to open and reseal, this closure is practical and modern in use. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

Banding / Banding Machine ATS Tanner Type US 2000 AB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven technology. Strip tension infinitely adjustable via potention meter/rotary regulator. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

For many years, the TCAP 47 was considered one of the preferred closure variants for one-liter packages. However, when using one-liter Slim packs, this closure is disappearing more and more from the manufacturers' ranges. The background to this is the new development of a comfortable closure, which has now more than just established itself on the market. This new HeliCap 23 cannot normally be applied with the existing TCAP 47. However, we are able to convert the existing TCAP 47 for the new HeliCap23 with our workshop team. After that, you can continue to operate your filling line without a PT, which also saves service costs on the PT. Convince yourself of this space-saving and cost-effective alternative to an attractive product format. We will be happy to explain some details to you. Please contact us and let us know your planning wishes together On request, we can provide extensive ...

The TCAP 21 ReCap 2 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 2 combines benefit and cost awareness. In addition, the product is given a secure closure solution. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The further development of the practical ReCap solutions in an even more user-friendly design. Better product flow makes it easier to use. The TCAP 21 ReCap 3 offers a high-quality and cost-effective closure solution. In combination with filling systems with a PT, the ReCap 3 combines benefit and cost awareness in optimized product design. In addition, the product receives an optimized secure closure solution. Suitable options: conveyor belt system and cardboard packer with or without wrap around, tray shrinker and other equipment. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a detailed, non-binding offer. All offers are subject to prior sale.

The straw applicator is the perfect solution for straw application. It is installed between the filling machine and the packaging machine and has servo motors and one or two inverters. The regulated and controlled application of the straw is thus perfectly possible. For years, this unit has been one of the most popular on the market. The constant and trouble-free speed of up to 7500 units/h is ideal for use in conjunction with the TBA 19 filling machine. To ensure that everything runs smoothly, we recommend installing a conveyor belt volume of at least 20m between the filling machine and the applicator. All components were checked and tested. The range can be used for different volume sizes. For this purpose, various components have to be replaced, which we are happy to do at the customer's request. On request, we can provide extensive services. In addition to consulting and plannin ...

This is a power unit with 2 servo motors. The TSA 46 applicators have a compact design and are very reliable. Trouble-free operation in a filling line is guaranteed even with long operating times. We have different variants of straw applicators in our warehouse. Regardless of the condition, all devices undergo a service in which the perfect status is established. For this purpose, wear parts are also replaced and finally various test runs are carried out for later use. Since the package size and also the type of straw vary, we can only assemble the final format parts after an order. If you are interested, please let us know for which format you want to use a TSA 46. We will make you an offer immediately. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a deta ...