an europe used for sale

Model: Amada Europe 255 Year: 2003 Tooling System: 27 Station Turret with 3 Autoindexing units Workable Maximum Sheet Size: 1300 x 2540 mm Press Capacity: 20 tonnes (200 kN) Electric Power: 29 kW Dimensions: - Length: 4900 mm - Width: 2900 mm - Height: 2150 mm Machine Weight: 11,000 kg Standard Equipment: Perimeter Light Beam Safety System Find more here - / Contact us at -

Used Paper Machine for Fluting and Testliner 2800 mm trimmed working width 200 t/24 h capacity With constant flow Sold without stock preparation, this can be delivered separately.

Europemill stone mill 950 H, 15 kw at 1000 rpm, v-belt pulley diameter 190-5 x 17, flat belt pulley diameter 800, n = 237 rpm, cleaned. Used condition.

Shrink wrapper BAUMER mod. Europea 207 + tray Year: 1998. Speed: 38 ppm. Launch of film + tray. Safety protections.

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

Used Baumer Wrap Around Packer 2003 The Baumer wrap around packer is a reliable and efficient piece of packaging equipment that is widely used in various industries This particular model the Europea 510 was manufactured in 2003 and has been well maintained over the years It is in excellent working condition and is ready to be put to use in your production line Whether you need to pack small items or large ones this wrap around packer is a versatile and effective solution that can handle a wide range of packaging needs Its high quality construction and reliable performance make it a valuable addition to any business looking to improve their packaging efficiency and productivity [...for more information send your inquiry to the seller.] refno: W11

Used Wrap Around Packer BAUMER EUROPEA 510 Plexiglass Protection of the Wrap Around Baumer Europea 510 Within the bottling industry paramount attention is given to operator safety The Used Wrap Around Baumer Europea 510 with Divider Cosmopack is equipped with plexiglass shields providing a secure work environment Moreover this feature significantly enhances safety conditions reducing potential hazards Electrical System Adhering to CEE Standards The electrical system meticulously adheres to stringent CEE regulations Consequently this guarantees the machinery s reliable and safe operation in strict alignment with industry standards Furthermore this compliance ensures optimal performance and minimizes the risk of electrical malfunctions Achieving a Remarkable Production Speed of Up to 30 Cartons per Minute An impressive feature of this machinery is its ability to achieve a remarkable produc ...

Hopper opening 400x780mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 2,2kW 3-phase 400 V/50 HZ480 V LxHxW 2220x1600x630 mm, Possible additions: exit tray, tub for tray, Stainless Steel version, See the chart below for more sizes, installed power : 2.2

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 11 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 3700x1600x870 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power : 11

Hopper opening 400x500mm Control panel With thermal motor protection only available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz. Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250 – 350 kg/m³ 2,2kW 3-phase 400 V/ 50Hz 480 V/-60 LxHxW 1950x1600x630 mm, Possible additions: exit tray, tub for exit tray, Stainless Steel version, See chart below for more sizes, installed power : 2.2

Hopper opening 400x780mm Control panel Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase Capacity with fish boxes made of 25 kg/m3: 15-20 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 23-30 boxes/h Dry boxes (for wet boxes a 3 phase machine is better) Non-corrosive Mobile on wheels Density 175-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz LxHxW 2220x1600x630 mm, possible additions: exit tray, tub for exit tray, Stainless Steel version, See the chart below for more sizes, installed power : 1.5

Hopper opening 560x1000mm Control panel with thermal motor protection only Available for: 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 35-45 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 50-60 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 4,0 kW 3-phase 400 V/50 HZ480 V/60 HZ Inlet opening 400×780 mm LxHxW 2900x1600x630 mm, Possible additions: removable bottom, removable bottom drawer, Stainless Steel version, See the chart below for more sizes, installed power : 4

Hopper opening 560x1400mm Control panel with thermal motor protection only Available for 3x230V / 50Hz or 3x400V / 50Hz 3x240V / 60Hz or 3x480V / 60Hz Capacity with fish boxes made of 25 kg/m3: 110-130 kg/h Capacity measured in fish boxes with lids (650 grams per piece: 170-200 boxes/h Wet boxes Non-corrosive Mobile on wheels Density 250-350 kg/m³ 15 kW 3-phase 400 V/50 HZ480 V/60 HZ LxHxW 4200x1600x870 mm, Possible additions: removable bottom, removable nottom drawer, Steinless Steel version, See the chart below for more sizes, installed power : 15

With combined pre-crushing and compaction of EPS material. Hopper opening: 300x490mm (11.8 x 19”). Control panel (1-phase) Connection: 1x230V / 50Hz 10 Amps. 1 phase (or two phases if no neutral) or 1×220-240V / 60Hz 10 Amps. 1 phase or 115V / 60Hz 1 phase. Capacity. Measured with fish boxes made of 25 kg/m3 density EPS 10-15 kg/h Wet boxes (it does work with wet boxes but less efficiently than a 3-phase model) Non-corrosive Mobile on wheels Density 140-225 kg/m³ 1,5kW 1-phase 230/110 V 50-60Hz Inlet opening 300×490 mm LxHxW 1850x1400x660 mm, Possible addition: exit tray, tub for exit tray, Stainless Steel version, See the chart below for other sizes, installed power : 1.5

ID 5334 More information on paptec.de Flute profile : B Flute Processing : One-sided Flute height : 2.34 (excluding paper thickness) Pitch : 5.7mm Flute Factor : 1.39 Enquiry about infopaptec

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Dowels - anchors, air layer anchors -Anchor: Ø 4 mm -Anchor length: 210 mm -Incl. Dowel: Ø 8 mm -Number per package: 250 pieces -Air layer anchors approved by the building authorities according to DIN: 1053 -(material no.1.4571/1.4401) -Dowel: (Ultramid B3S) -Number of packages: 60 -Price: per package -Weight: 6.5 kg/piece

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT Smaller and larger quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expe ...

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Stainless steel containment system Glove Box with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used, as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178407 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1000 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.4 L oil; 3000/113 rpm 4x Load cells "Fli ...

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request

Complete Veneer Peeling Line Working Length: 3300 mm

Veneer Vertical Slicer Manufactured by Angelo Cremona

Veneer Slicer, model TN 4000, manufactured by Angelo Cremona

Generator Type of Generator Three-Phase Synchronous Generator GSCR 800Y4 Power: 7,250KVA Voltage: 10.500V Frequency 50 Hz Phase number 3 Number of poles 4 Rated current 398.8A Power Factor 0.80 Rated speed 1,500rpm Spin speed 1,800 rpm Insulation heat resistance class F Ambient temperature 40oC Rotor mass moment of inertia 118.75kgm² Winding circuit star Nominal excitation voltage 41.2/158.3V Excitation Rated Current 54.2/152.3A Operating mode continuous operation Protection class IP 4 Cooling water volume 660l/min Cooling water inlet temperature 40oC Cooling water inlet pressure 4bar Air inlet temperature 45oC Bearing Type: Rolling Bearings Bearing A-side EMZLB18-200 Bearing B-side EMZLQ18-200 Min. Backlash Shaft/Bearing 0.267mm Max. Backlash Shaft/Bearing 0.342 Approved Max. Backlash Shaft/Bearing 0.410 Lubrication Type of Bearings Oil, Pressure Circulat ...

Generator Type of Generator Three-Phase Synchronous Generator GSCR 800Y4 Power: 7,250KVA Voltage: 10.500V Frequency 50 Hz Phase number 3 Number of poles 4 Rated current 398.8A Power Factor 0.80 Rated speed 1,500rpm Spin speed 1,800 rpm Insulation heat resistance class F Ambient temperature 40oC Rotor mass moment of inertia 118.75kgm² Winding circuit star Nominal excitation voltage 41.2/158.3V Excitation Rated Current 54.2/152.3A Operating mode continuous operation Protection class IP 4 Cooling water volume 660l/min Cooling water inlet temperature 40oC Cooling water inlet pressure 4bar Air inlet temperature 45oC Bearing Type: Rolling Bearings Bearing A-side EMZLB18-200 Bearing B-side EMZLQ18-200 Min. Backlash Shaft/Bearing 0.267mm Max. Backlash Shaft/Bearing 0.342 Approved Max. Backlash Shaft/Bearing 0.410 Lubrication Type of Bearings Oil, Pressure Circulat ...

Second-hand Flow Wrapper and Shrinker Manufacturer: Cryovac Model: CJ 50 and CJ 51 Year of manufacture: 1995 and 1999 Appear in nice condition

Pick and place Servo feeder Herzog+Heymann/Sigma; good condition; maintained and tested by Sigma Customer Service; Format max.200x150mm, min.50x50mm; Material thickness 0.1-6mm; High-speed version up to 18,000/h Pick and place servo feeder Herzog+Heymann/Sigma; good condition; checked by the support of Sigma; size max.200x150mm, min.50x50mm; thikness 0.1-6mm; high speed version up to 18.000/h.

Heavy stop angleDates:Dimensions: 650 x 1000 mmMaterial thickness: 20 mm- hardened- not rusty- in the wooden boxlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

I am selling the Colombo Angelo Figli AM33/AF window angle system. Year of construction 2005. Pin side saw + 620mm spindle fully servomotor. Roll forming side 3 spindle + strip cutting unit fully servomotor. Milling heads VYDONA WOOD EU78-92, wood-aluminum 92 everything programmed into the machine and included / possible to bill if not accepted. Combined power 50KW Weight 6000kg. Compact size, cheap also for small workshops. Available right in stock. Condition very good. Complete system with tools / possible to bill if not accepted. Please contact us for more photos and info.

max. pole diameter 80 mm Weight approx. 520 kg Dimensions LxWxH: 1520 x 610 x 1350 mm

Center height:165 mm Center width: 750 mm Spindle bore: 38 mm Bed width: 195 mm Speeds: (16) 35 - 2480 min-1 Motor power: 2.5 / 2.0 kW Tailstock mount: MK3 Quill stroke: 100 mm Dimensions, approx.: 1650 x 540 x 1450 mm Equipment: - 3-jaw lathe chuck - Emergency stop impact button - Quick release holder System Multifix - Bed stop - Reducing sleeve MK3, MK5 - Splash guard back panel - Interchangeable gears - Jaw chuck protection with limit switch - Coolant device - Operating tool - Service incl. oil change

1. UHT: - GEA Finnah - YOM: 1991 - Capacity: 1200 l/h 2. Steep tank: - Rieger Behälter GmbH - YOM: 2008 - Cooling mantle - Volume: 6,250 l - Max. Pressure: 3.5/-1.0 bar 3. Homogenizer - GEA Nirosoavi NS3037 H - YOM: 2001 - Capacity: 2,000 l/h - 2 stages, max. 250 bar

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

С 6 головками. Моноблок состоит из: - насадчик капсул; - предварительный обжим и полный обжим капсул. Для шампанского More then 300 machines new and second hand on our seema .de

Analytik Jena Merkur Mercury Analyzer Single-beam device with low-pressure lamp Measuring range in the ppt and ppb range. Excitation Fluorescence at 253.7 nm Software

-Automatic plate punch and plate bender -For Heidelberg Speedmaster 74 -Pneumatic/Electric system

Please find enclosed the information we sent you a few days ago. Brand: LCM Model: QUADRA Year of manufacture: 2000 Feeders are about 80mm wide: 2 feeders come prepared for 8 coils of 1206 type components. 1 feeder comes set up for 4 larger components. I believe the feeders are configurable if you change the coil type. It includes a PC with the software and power stages to control everything. Machine Description: The QUADRA DVC Pick-and-Place machine is designed to automate the assembly process in electronics manufacturing. It consists of the following main components: 1. Feeder System: The machine is equipped with multiple feeders that hold different types of electronic components, such as resistors, capacitors, integrated circuits (ICs), and surface mount devices (SMDs). These feeders supply the components to the pick-and-place head for placement onto the PCB. 2. Vision Sys ...

Filling, closing and palletizing system : Manufacturer: CONCETTI SpA, Italy Year of construction: 12/2012 Consisting of: Hose dispenser (film roll), Product pre-container with volumetric belt feeder type DOS.VOL., Filling system type FFS-E with belt take-off, Bag leveling press with rollers, bag positioning, pallet feeding device, Palletizing system type PS-AB/10S, sliding palletizer with pallet track, Stretch hood machine, make VFB BOCEDI with pallet conveyor, Electrical control cabinets with Siemens control panel, S7-300 control. The on-site material feed hopper with belt feed can be purchased as an option. System data: Dimensions (total system): Length: approx. 31.25 m Width: approx. 6.14 m Height: approx. 5.20 m (stretch bonnet machine) Capacity (manufacturer´s specification): approx. 500 bags of 25 kg per hour Product types: Sand (dry / wet) Gravel (dry) Bulk de ...

Leavening and baking line MCS (Werner licensed oven) consisting of the following : 740x740mm tray handling system (trays and peel-boards) . Speed 7 trays/minute proofing cell approx. 90 min with 8 trays (2 floors of 4) with loading and unloading on the floor Baking system with pusher for trays and with pick-up pen for product from peel boards (baking directly on the oven net) 60 sqm baking oven with MCD thermal cycle under Werner licence with 1 burner, length 22 metres, width 3 metres, mesh with drum drive Baking system with tray turner + needle depanner with pneumatic control + direct discharge system from oven for peel board product loading and unloading system with magazine for plastic peel board Find more here - / Contact us at -

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

Beer Storage Tanks, Stainless Steel, Horizontal 6 x 12000 L Beer lager house with 6 stainless steel horizontal pressure tanks installed in stainless steel tank rack which keeps tanks in two layers for saving floor area. Originally these tanks were designed for Weiss Beer and therefore max operating pressure can be 5.8 bars. Tanks are jacketed and cooled with glycol-water solution from sides of the tanks. Tanks are equipped with pressure safety valves, CIP bowl, temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - Lager Tank Gross 3 x 12000 liters, work pressure 4 bars, year 1980 - Lager Tank BAM Freising 3 x 12488 liters, work pressure 5.88 bar, year 1974 - Tank material Werkstoff 1.4541 (10 CrNiTi 18) - One stainless steel rack for supporting ...

Cylindrical Cone Fermenting Tanks CCT 8 x 150hl Cylindrical cone fermenting tanks (CCT) with net capacity 150hl. Tanks are vertical indoor type with 80 mm PU insulation, self-standing on four legs, with three (glycol) cooling zones, two on the side + one in cone. Tanks have cooling control system for each tank and each zone separately, sampling valve on outside on tank skirt, two CIP panels which are connected to tanks, inside tank rotating CIP ball and normal under pressure and overpressure safety valves on top of thanks. Generally, tanks are in good condition, and they have a high hygienic level. These CCTs have a dedicated chiller made by made by Italian Rhoss S.P.A in year 2015. Compressor is a scroll type, rotary, hermetic and with Inverter actuation (1+i) complete with thermal protection and casing heater. Cooling refrigerant is Freon R410R. Chiller is air cooled by two axial f ...

Analytik-Jena AAS flame + graphite furnace (with Zeeman effect) AS 52S flame autosampler capacity 49 samples Fornetto MPE 60 autosampler 89 samples 6-post hollow cathode lamp tower Hydride system HS60 WINAAS software version 3.17.0 for Windows XP environment Without PC and without water cooler.

Manufacturer Angelantoni ACS Model DY 110 Operating condition Used (as good as new) Year of construction2021 Value added tax Deductible DescriptionClimate test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Technical data: - Test chamber dimensions: 548 x 447 x 447 mm - Test chamber volume: 110 litres - Working range temperature tests: -40 to +180°C - Working range of climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Rated power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/UE Electromagnetic Compatibility Directive - IEC 61439-1/2 Low-voltage switchgear and controlgear assemblies - IEC-60204-1 Safety of machinery - Electrical equipment  ...

Description: • Sharpening machine for band saw blades • Grinding wheel diameter approx. 150 mm • Motor 0.37 KW-1450 rpm IMPORTANT: Belts and a roller support are missing weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 700 x 1,400 mm