an 005 used for sale

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

Straight runner for applying a sign or wrap-around label (with glue) to cylindrical containers,, Gluing height: 205mm, (optional 255mm possible) classic strip gluing, Label length: 80 – 335mm (e.g. 99mm, 850g can), Performance: max. 9,000 containers/hour, without restrictions, as label lengths are independent, Frequency controlled with fully automatic speed control, Triggering the labeling process via photocell, Incl. glue pump with heating and stainless steel lid, Silver grey paint finish, The machine comes from a small factory and was only used sporadically,, This makes it excellent. However, it has been technically and visually overhauled and is therefore in perfect condition., Including 6 months warranty on mechanical parts (excluding wear parts), The sale includes one format set of your choice, additional format sets are available optionally at an additional cost., Optionally avai ...

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request

Veneer Vertical Slicer Manufactured by Angelo Cremona

Veneer Slicer, model TN 4000, manufactured by Angelo Cremona

Analytik Jena Merkur Mercury Analyzer Single-beam device with low-pressure lamp Measuring range in the ppt and ppb range. Excitation Fluorescence at 253.7 nm Software

Ansaldo Condensing Steam Turbine Power: 9000 kW RPM: 7500 / 1500 Steam pressure: 40bara Steam temperature: 420 ºC Back Pressure: 0,08bar Number of extractions: 2 Number of stages: 8

Complete Veneer Peeling Line Working Length: 3300 mm

Martin/Geel/Miller/Engl weld-on plate with retaining lugs Size M03 35mm shaft diameter 184mm internal widths 180mm shaft spacing

Selling complete switch production with know how. Production include: Bflvedy7tb 1. 51 moulds for plastic parts, two diferent design of switch type programs, ALL MOLDS ARE IN PERFECT CONDITION. 2. 28 stamping tools for steel parts underconstruction of bottom switches and plugs 3. Complete assembly line with tables pneumatic screv drivers delivery vibration machines for screews and other parts 4. Row half product aprox 50000 parts on stock to assemblle 5. Packed finished stock of switches ready to sell in different types and models. 6. testing equimpent for quality for switches. 7. Complete production information with buyers list , price lists. 8. Showroom glass panels with promotional complete types of switches. 9. Lot of other accessories and equipment -look attached photos many more equipment not on photos of machineenseeker only 15 photos limit. Company has ISO 9001 AND IT ...

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Device for inline measurement of Brix(sugar)o.Diet, CO² and conductivity

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

Used Linear Magnetic Flowmeter Filler – Overview This second hand linear volumetric filling machine is engineered for PET and HDPE containers up to 5 L, ideal for used bottling line upgrades in beverage production and industrial packaging. Equipped with 6 magnetic flowmeter dosing nozzles in 316 stainless steel, a CE-compliant HMI/PLC platform, and a hygienic stainless-steel build, it delivers accurate, repeatable fills for still water, detergents and liquid soap. Technical Specifications & Performance Data Core configuration Model: Linear 6-nozzle magnetic flowmeter filler up to 5 L Filling principle: Volumetric dosing via magnetic flowmeters (non-isobaric) Nozzles: 6 x 316 stainless-steel filling nozzles with individual magnetic flowmeters Container materials: PET and HDPE Container size range: up to 5 liters Applications: still water, detergents, liquid soap and similar non-carb ...

<b>Features:</b> Used pallet roller conveyor from Pack & Roll GmbH Fuesse to order separately Geraeuscharm Condition: fully functional with traces of use Ideal for fast material transport Professionally dismantled and packaged Color: Silver Drive: Gravity Total 14.58m plug available <b>Technical data: </b> Dimensions of the roller conveyor Total quantity in stock: approx.: 14.580mm Length per segment: 3645mm Total width: 1150mm One brake roller is available per segment Diameter of brake roller: 90mm <b>Details of the role</b> Clamping length: 1055mm Diameter approx.: 60mm Axis distance: 130mm, adjustable Material: steel, galvanized <b>Information on the framework</b> Height: 80mm Width: 40mm <b>Pallet roller conveyor</b> The roller conveyor is ideal in the picking zone for int ...

ANGER HCP 203 Production GENERAL Project No.: 905739 Quantity: 2 pcs. Manufacturer: ANGER Type: HCP 203 Control: Siemens 840 D Year of manufacture: 2005/2013 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION There are 2 production lines available. Each production line consists of three ANGER multi-spindle machining centers, each of which is connected to a KUKA robot. The loading and unloading of the EWAB conveyor belt is located at the back of the machines. ANGER (1) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 4 vertical milling and drilling spindles at the top, touch probe at the top, 4 horizontal milling and drilling spindles at the left. Workpiece carrier with three linear axes and two rotation axes. ANGER (2) - 5-axis: 4 vertical milling and drilling spindles at the bottom, 6 vertical milling and drilling spindl ...

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale ype : Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 06 Dec. 2025 Description meat pad, fruit pad, food pad , surgical mask production line The 3-ply mask production system offered here combines efficiency and safety features with a first-class mask of type II / IIR optimized for high wearing comfort. The integrated extra module "Single Pack" enables the mask production machine to pack each mask individually wrapped at full speed of up to 800 masks / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. The mask is made up of 3 layers of non-woven material: - An outer layer of spunbond - A meltblown filtratio ...

Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 ME ...

x-travel: 6.500 mm y-travel: 1.500 mm z-travel: 2.000 mm Control: HEIDENHAIN iTNC 530 HSCI clamping table: : surface area: 7.300 x 1.200 mm total power requirement: kW weight of the machine ca.: 58 t dimensions of the machine ca.: 14,5 x 7,0 x 4,85 m • Heavy-duty traveling column milling machine with controlled NC milling head, fixed table, and transversely movable column • HEIDENHAIN iTNC 530 HSCI CNC control with 15 screen and stainless steel housing, control panel movable to the front of the machine • Second operator station mounted on the machine stand • Nicolas Correa universal milling head type UAD, 0.02x0.02°, SK50 • Spindle speed max. 6,000 rpm, power 28/42 kW, max. torque 1,375 Nm, two gear stages • Preloaded precision ball screw drives and servo motors in all linear axes • HEIDENHAIN HR550 electronic wireless handwheel • Operating mode 3 • Hexagon M&H 3D prob ...

Mobile vacuum station for use on a degassing opening on the extruder or tool as well as for support in vacuum profile forming - a water ring vacuum pump VG-55 mounted on a welded and painted steel base frame with maximum vacuum Volume of 55m3/h, with kpl. connected supply and cooling system - Vacuum connection: 1x connection pipe with internal thread R1" or GEKA coupling and hydraulic hose 2TE DN25 length 700mm - a VA service water separator and storage tank with fresh water connection R1/2", level switch and drain tap for easier daily cleanse - a cooling coil built into the separation tank and removable cooling coil made of hde-ribbed tube - Water drain on water tank: R1 1/4" - Cooling water connection to cooling coil: R3/8" - an additional vacuum separation container made of steel (hot-dip galvanized) in front of a vacuum pump for separation (diffusion) of the  ...

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

Introducing the versatile CNC Milling Machine with HEIDENHAIN iTNC530 control, designed for precision machining tasks across various industries. With impressive X, Y, and Z-axis travels of 3,000 mm, 1,700 mm, and 1,500 mm, respectively, this machine offers considerable flexibility for complex operations. The robust spindle delivers power between 28 kW and 38 kW, achieving speeds from 30 to 5,000 rpm, while the spacious worktable measures 3,200 x 1,200 mm and supports up to 8,000 kg. An electronic handwheel and chip conveyor enhance functionality, and the unit is 4th axis ready. Its ISO-50 DIN 69871A tool holder and cooling through the spindle further optimize performance. Available in [Location/Availability], this machine meets diverse manufacturing needs with reliable efficiency.

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) • Unwind Rewind ProLed System and Dryer The Cutting BST Powerscope 5000 Inspection System Sheeting station (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 m ...

Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Continuous Juice Pasteurizer Pasteurization Plant Pasteurizer 8500 ltr/h used heat pasteurize pasteurize cool juice durable make flow heater continuous paste sterilizer used. The pasteurizer plant was used for pasteurizing and cooling back drinks and apple juice. Manufacturer: Anlagenbau AG Worb Power approx. 8500 liters per hour Built c. 2001 0.6 m2 / 117 kW / max. 120 °C Including: - Pipe heat exchanger/tube heat exchanger and plate heat exchanger - 1x stainless steel tank with lateral rubging agitator - 1x pump type R905-2W - 1x stainless steel coolant compensating tank Odenwald Y.O.M. 1992, volume 112 liters. - Buffer tank - 3x Alpha Laval centrifugal pumps, type LKH114155 (11 kW) & type LKH113555 (7.5 kW). - Stainless steel switching/control cabinet Room requirement complete system approx. 6000 x 4400 x 3700 mm The plant has already been dismantled and  ...

compact sole cleaning machine made of stainless steel with hand hygiene module for controlled Cleaning of both hands with soap and water and subsequent dispensing of disinfectant and Access control via turnstile unit (left-side). Drying by paper towel from Roll towel dispenser, waste basket for the disposal of used wipes integrated on machine. The hygiene station is intended for use in 2-way operation (exit direction can be deactivated by the customer). A complex integration of the photoelectric sensors into the DDC/PLC control system offers additional safety functions, such as outsmarting protection for the turnstile system or a obligatory simultaneous disinfection of both hands. The DDC/PLC also enables the Individual configuration of certain process parameters (e.g. dispensing time soap/disinfection or brush running time). In addition, unassigned, potential-free cont ...

General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Ncsbmjv Edh Rjy Ex Ipsu Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources Typical Applications Hea ...

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

x-travel: 4.000 mm y-travel: 1.700 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mm max. workpiece weight: 10.000 kg/m² T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min Orthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kW Speed range, stepless: 60 - 6.000 min-1 max. torque: 1.500 Nm tool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 25 kg changing positions: Horizontal/Vertikal total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: 11,0 x 6,0 x 4,6 m Equipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via inter ...

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to  ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 &euro; Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

SVOLGITOR TO BARRA "DE ANGELI" FOR BOBINE SILURO CORDATRICE 4 PLACES "DE ANGELI" FOR BOBINE : 1 000 GIRI 200 N/1' VOLANO OF TIRO - 1500 COUNTERMETERS "DE ANGELI"

Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph

D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph

Ankom HCl Hydrolysis System with RD2 Dryer Ankom HCl – Hydrolysis System Automatic system for hydrolysis of all types of fat samples using Filter Bag technology Rapid method in preparation for solvent extraction of grease and oil samples Hydrolysis of up to 15 samples at a time Closed system Automatic temperature control and flushing Total time hydrolysis including rinsing approx. 80 min Microprocessor-controlled with LCD display incl. RD dryer for hydrolysis system More items in other sizes - new and used - can be found in our shop! International shipping costs on request!