an 005 used for sale

HÄNER HCM300 Concrete mixing bucket for wheel loaders and excavators without pick-up Working width: 1330 mm Height: 800 mm Depth: 840 mm Nominal capacity: 300 l Maximum capacity: 340 l Curb weight: 550 kg Concrete weight: 800 kg Total weight: 1350 kg Required oil volume: 40-90 l/min Maximum pressure range: 240 bar Drive Type Mixing Shaft: Chain Important safety note: The total weight of the mixing bucket may not exceed 90% of the tipping load (kinked) of the carrier device. Auction-ID: A1-46656-1325

Index R 200Year of manuf. : 2011 Control : Siemens C200-4D SL ____________Description:In General:Year of construction:2011Control system:Siemens 840 Dsl (C200-4D SL)Bar capacity:65 mmMilling spindles:18,000 rpmMain spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°Z-axis:390 mmBar capacity:65 mmClamping cylinder:Hollow clamping cylinderChuck:3-jaw chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmMax. power:35.5 kWTorque max.:170 NmC-axis:0.001°X-axis:600 mmZ-axis:390 mmBar capacity:65 mmChuck:3-jaw chuckTool carrier I:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40X-axis:350 mmY-axis:160 mm (+/- 80 mm)B-axis:230°Tool carrier II:Technology:Milling spindle on cross slideSpeed:18,000 rpmTool holder:HSK 40Y-axis:160 mm(+/- 80 mm)B-axis:230°Tool magazin:Technology:Chain magazineNumber of station ...

YEAR 2001 ; The AM 02 Universal is an electro-pneumatic universal wire stripping plier, for the fast and reliable processing of bulk insulated Z+F terminals from 0.5 mm² to 2.5 mm² (AWG 20 – 14) with a crimping length of 6 mm to 12 mm. Optional additional tool kits are available for 0.34/4 mm² (AWG 22/12). Auction-ID: A1-46617-50

BRAND : Mecal - KMI - Inarca - Comtec ; mechanical and electro-pneumatic mini-applicators, in different front and side models, from different brands, including: Mecal, KMI, Inarca, Comtec. Auction-ID: A1-46617-24

Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to  ...

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Height=0.4 m, Overall length= 0.32 m, Overall width= 0.78 m, Net weight= 31 kg,

Eliona crate washing and drying machine with infeed and outfeed conveyor system, model: PWR550.60H/2xCD150.40, serial number: D00739, year of construction: 05-2008, 400 V, 3 Ph, 50 Hz, 89 kW, possible crate dimensions: 600 mm x 400 mm x 120 mm and 600 mm x 400 mm x 200 mm, total dimensions washing and drying machine: 11700 mm x 1700 mm x 2100 mm, dimensions infeed belt: 1300 mm x 600 mm x 1150 mm, dimensions outfeed elevating belt: 4500 mm x 800 mm x 4000 mm. Including two pallet boxes with parts.

Multipond weighing and dosing line consisting of: - Multipond 16-heads multihead weigher, type: MP-1601-FF, fabrication number: M1734, year of construction: 2002, 400 V, 3 Ph, 50/60 Hz, minimum weight: 20 gram, maximum weight: 600 gram, d= 0.2 gram, dimensions: 1500 mm x 1250 mm x 1050 mm - Vibrating gutter, gutter width: 400 mm, total dimensions: 1700 mm x 500 mm x 800 mm - Mobile batcher, 2 to 6 heads, dimensions: 1500 mm x 1400 mm x 2110 mm - S/s frame for heads and parts for multihead weigher, dimensions: 1440 mm x 2100 mm x 1000 mm - Plastic pallet box with parts for multihead weigher.

Automatic double sanding system for battery boxes, each identical to the Kuka robot, wood and parts sanding device, housing, with roller infeed and outfeed, year of manufacture 2023

Annealing furnace SAT, year of construction 2005, annealing temperature 185 °C, 2-door

Annealing furnace SAT, year of manufacture 2021, annealing temperature 185 °C, 2-door

complete with tank and carrying straps, Viewing by appointment only Auction-ID: A1-40256-56

Coffee machine with 3 hot plates and stainless steel base. Viewing by appointment. Auction-ID: A1-40256-141

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45043-2287

Function: This machine is designed for precise cutting and mitre cuts and has a swivel and tilting sawing unit, including accessories such as spare saw blades Auction-ID: A1-46862-29

Impact drill - screwdriver - angle grinder - impact wrench - including 2 batteries and, battery charger - handles impact drill and angle grinder - safety cover angle grinder. This in 2 suitcases. Auction-ID: A1-40256-81

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45043-2285

Suitable for making a roof or floor for your garden house or canopy. These OSB sheets are waterproof glued and therefore strong. Auction-ID: A1-45043-2282

Tool trolley AND tool case. Trolley with 7 drawers, 5 of which are filled with tools. And for portable, robust tool case incl. 86 pcs tools. Auction-ID: A1-40256-52

Spruce boards with tongue and groove connection, with a size of 510 x 12 x 2.2 cm each. Auction-ID: A1-45043-2349

Suitable for making a roof or floor for your garden house or canopy. These OSB sheets are waterproof glued and therefore strong. Auction-ID: A1-45043-2283

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2230

Scrubs, vacuums and dries all dirty surfaces. High cleaning performance of 2,000 m² per hour - 5 hours of continuous use thanks to 2 powerful batteries - 50 liter freshwater and waste water tanks each. Working width: 510 mm - rotating brush - Battery charger unused Auction-ID: A1-40256-53

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45043-2286

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40256-129

Pulse Oak anthracite laminate from the brand Purity à 1.83m² per pack = total of 1.83m². Auction-ID: A1-45043-2110

Spruce boards with tongue and groove connection, with a size of 510 x 12 x 2.2 cm each. Auction-ID: A1-45043-2350

- screwdriver - Drilling machine - Impact wrench - angle grinder 1x Li-ion Battery Charger 1x Li-ion Battery 20V 2Ah 1x Li-ion Battery 20V 4Ah 5x Cutting disc 1x Drill set 9 Pcs 1x 1/4\" 65mm ADA 1x 1/2\"73mm ADA 1x Key Chuck Angle Grinder unused Auction-ID: A1-40256-119

Approx. 500 kg of material in total; Longest pipe for transport 6000mm Auction-ID: A1-46862-64

OSB boards with tongue and groove connection, with a size of 205 x 67.5 x 1.2 cm each. Auction-ID: A1-45043-2288

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2229

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45043-2231

Suitable for making a roof or floor for your garden house or canopy. These OSB sheets are waterproof glued and therefore strong. Auction-ID: A1-45043-2284

turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...

turning diameter:356 mm turning length:705 mm control: CELOS M730 UM MAPPS swing dia.:742 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 ( ±50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min Rapid travel B-axis (parts transfer subspindle):734 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:15/18,5/18,5 kW Spindle 1 Torque:409/505 /599 Nm Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:4500 1/min Spindle 2 power:7,5/11 kW turret stations / rotary tool stations:20 / 20 BMT40 speed of driven tools:10000 1/min :3.7/5,5/5,5 kW torque rotary tools:14 / 24 Nm total power requirement:38 kVA weight of the machine ca.:6,3 t dimensions of the machine ca.:4 (9) x 2,1 x 2,2 m Parts catcher:Sp. 1 und Sp. 2 Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) Tool presetter:Spindle 1 & 2 High precision Turning and Millin ...

turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.

turning diameter:65 mm turning length:120 mm control:Index C200-4D SL z-axis main spindle travel:390 mm z-axis subspindle travel:390 mm x-axis subspindle travel:600 mm Travel Y1:± 80 mm Travel y2:± 80 mm x-axis rapids:45 m/min y-axis rapids:15 m/min z-axis rapid travel:45 m/min Spindle 1 RPM:5000 1/min Spindle 1 Power:35,5/27,5 kW Spindle 1 Torque:170 /125 Nm Spindle 2 RPM:5000 1/min Spindle 2 power:35,5/27,5 kW Spindle 2 torque:170/125 Nm c-axis:0,00014 ° bar material dia.:65 mm spindle nose:AD 140 spindle bore:85 mm Milling spindle 1 RPM:18000 1/min Milling spindle 1 power:11 kW Milling Spindle1 torque:19 Nm Milling spindle 2 RPM:18000 1/min Milling Spindle 2 power:11 kW Milling spindle 2 torque:19 Nm B-axes swivel angle:230 ° B-axes torque:440 Nm B-axes angle resolution:0,001 ° Milling spindle 1 & 2 tool magazine:80 HSK A40 Milling spindle 2 tool magazine static tools :6 x VDI 25 ...

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

turning diameter:670 mm turning length:1540 mm control:F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover:700 mm Travel turret No.1 (milling spindle) x/y/z:495 / ± 150 / 1562(+164) mm Rotation B-axis:-30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z:40/40/40 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:20,2/18,8 kW Torque of milling spindle:120 / 44 Nm tool taper milling spindle:Coromant Capto C6 Tool magazine for milling spindle (turret 1):76 Tool change time tool/tool, milling spindle:1,25 s Spindle 1 RPM:3000 1/min Spindle 1 Power:36 / 30 / 25 kW C-axis spindle 1:0,001 ° Bar capacity spindle 1:102 mm Spindle 2 RPM:4000 1/min Spindle 2 power:26 / 22 / 15 kW C-axis spindle 2:0,001 ° Bar capacity spindle 2:80 mm dimensions of the machine ca.:7,8 x 3,6 x 2,9 m Linear scales on axis:X, Y programmable steady:KLU-A530 & SLU-X3.2 Spindle 1 ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

turning diameter:356 mm turning length:705 mm control:MSX 850 MAPPS II swing dia.:755 mm standard turning diameter:275 mm travel -x axis:260 mm travel -y axis:100 (+-50) mm travel -z axis:795 mm rapid travel - longitudinal/face:30 / 30 m/min rapid traverse Y-axis:10 m/min Rapid travel B-axis (parts transfer subspindle):30 m/min Spindle 1 RPM:4000 1/min Spindle 1 Power:18,5/18,5/15 kW Spindle 1 max. bar diameter:80 mm Spindle 2 RPM:6000 1/min Spindle 2 power:11 / 7,5 kW turret stations / rotary tool stations:16 / 16 VDI 30 :5.5/5,5/3,7 kW speed of driven tools:6000 1/min total power requirement:39,2 kVA weight of the machine ca.:6,2 t dimensions of the machine ca.:3,1 x 2,0 x 2,2 m Spindle 1 Chuck:Kitagawa B 210 (250 mm) Spindle 2 Chuck:Kitagawa B 206 (160 mm) High precision Turning and Milling Centre with Y-axis and sub spindle. Easy programming by MAPPS II Control.

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. Workpiece: Piston pin Drawing number: WHT 000 718, WHT 000 718 A Workpiece dimensions (Ø, WxH): Ø26 x 66; Ø29 x 65 Length: 66 or 65 mm Material: 17Cr3 Quantity: xxx parts / year Cycle time: 5 sec. However, workpiece lengths up to 600mm are manageable. The machining diameter can be adjusted if the appropriate tools are available. The clamping station can currently only accommodate this product. However, this can be adapted by changing th ...

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version Chip conveyor, belt filter press, hydraulic unit, as well as infeed and outfeed chain conveyor EWAP, with 33 pallets. The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:270 mm turning length:710 mm weight of the machine ca.:6,5 t max. swing diameter:590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools.

turning diameter:120 mm turning length:650 mm weight of the machine ca.:11 t dimensions of the machine ca.:5,032 x 3,048 x 2,445 m Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts.