an 005 used for sale

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3649

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3675

Batteries from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45451-1127

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3623

Lathes with: - Digital display - Quick-release steel holder - 3-jaw chuck 200mm and 160mm - Chip tray - Centering tip Turning diameter over bed 460 mm Turning diameter over support 280 mm Turning length 1000 mm Center height 230 mm Circumferential diameter in offset 720 mm Spindle bore 53 mm Spindle speeds 28 - 1250 rpm Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions approx. 2.4 x 1.4 x 1.75 mm Auction-ID: A7-46460-450

Charger 24V Ah with REMA battery plug and 400V wall plug Loading onto trucks no problem Auction-ID: A1-45451-3554

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video:https://youtu.be/l0uTt_vas10 - Former Linde full-service device - Battery: 14/2020, 24 3PZS 375Ah, very good performance measured at 25.2 V Auction-ID: A1-45451-343

Youtube function and status video: https://youtu.be/3eyfAb14C7g Battery: 20/2019, 24V 375Ah, very good performance measured at 25.7V very clean device from clean laboratory Auction-ID: A1-45451-448

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Sp3LMaepGbc - Former Linde full-service device - Battery: 07/11/2017, 24V 3PzS 375Ah, very good performance measured with 24.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45451-359

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/aQNY8FxI8MA - Former Linde full-service device - Battery: 44/2023 48V 375Ah, good performance measured with 24.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-363

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3638

Clamping angle Clamping area 400 x 400mm each See pictures Auction-ID: A7-46460-623

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3576

Youtube function and status video: https://youtu.be/FjyLk8GB7k8 Former Linde full-service machine Battery: 16/2016 24V 3PzS 375Ah, with good performance, measured with 24.8 volts - Integrated scale - without initial stroke Auction-ID: A1-45451-342

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3652

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3705

Drilling and milling machine with - Variable spindle speed - Cross support - Rotatable spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm Projection 185 mm Drilling stroke 50 mm Capacity finger tiller 20 mm Spindle Holder MK 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment transverse 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-504

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-Z5ryHlumUY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 24/11/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45451-309

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/nU49Wm7zxbU - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, very good performance measured at 25.5V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-390

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3616

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/zNWcPFYonRk - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2018, 23.1V/205Ah/4.736kWh, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45451-308

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5) Auction-ID: A7-46460-488

Clamping angle Clamping area each 900 x 11005mm Footprint 900 x 500mm See pictures Auction-ID: A7-46460-629

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/axx9j93EjOQ Former Linde full-service machine Battery: Premium Hoppecke exchange battery 24V 2PzS 250Ah, with good performance, measured with 24.3 volts Auction-ID: A1-45451-453

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3523

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/fhHgzyb32fo Former Linde full-service machine valid service until 12/2026 UVV valid until 12/2026 Battery: 206/11/2019 24V 3PzS 345Ah , with very good performance, measured at 25.0 volts - Triplex mast with full free lift Auction-ID: A1-45451-354

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3525

Professional industrial screw compressor from Air Krone / Bottarini, type KS10, mounted on horizontal pressure vessel and equipped with integrated refrigeration dryer. Suitable for continuous use in workshop, industry and woodworking. Machine is in used condition but has been tested in working order. Display active and compressor builds pressure - Compressor type: screw compressor, Maximum pressure: 10 bar - Capacity / output: Compressor: 900 L/min, Refrigeration dryer: 1100 L/min - Power: 7.5 kW - Voltage: 400V - Current: 16A - 3-phase power current - Weight: approx. 298 kg - Integrated air dryer present - Horizontal pressure vessel integrated - Electronic control/display - Working pressure visible on display & video Auction-ID: A3-43525-10914

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). 131/4050mm, 24/4350mm, 4/4650mm Auction-ID: A1-43752-85

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa  ...

TS 55 REBQ Plus Cables and Systainer with replacement blades Auction-ID: A1-46501-819

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V  ...

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43752-87

Equipped with: 1x freezer and 1x cold room. Freezer room 7 meters long, 5 meters wide. Cold room 7 meters long, 5 meters wide. Auction-ID: A1-40111-3

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...

Lex 3 150mm, 2 Plates, Screws, Polishing Discs, Velcro Discs Auction-ID: A1-46501-2038

Demo machine, raked approximately 50 hectares, Equipped with independent lifting. Auction-ID: A1-40137-47

Manufacturer:NeoDen Model: K1830 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Mounting speed: 16,000 CPH maximum - Number of tape reel feeders: 66 (electric and pneumatic) - Number of IC trays: 10 - Placement area: 540x300 mm (1500 mm optional) - Maximum mounting height: 18 mm - Mark camera recognition system: 2 groups, left and right, US ON sensors - Flying camera recognition system: 2 groups, front and rear, US ON sensors - Operation system: patented SMT Mounting Operation System V1.3 - XY motion feedback control: SPM/IBG magnetic linear encoder - XY drive motor: Panasonic A6 750W servo motor - Repeat position accuracy: 0.01 mm - Compressed air: more than 0.6 MPa, maximum flow rate 37 L/min - Voltage: AC 110V/220V, 50Hz/60Hz - Machine dimensions: 1290x1060x1300 mm ...

A4 printer black/white, counter reading 194,158 prints total, status OK, checked by a legitimate technician! PostScript 3 is activated! Please note the enclosed pictures for the toner and drum levels in percentage! Auction-ID: A1-42276-2655

CONTROLS   CNC controls NUM 1060 WORKING RANGE TURNING   swing diameter (max): 2000 mm   workpiece weight max.: 25000 kg CROSS BEAM SLIDE   - rotation speeds (min): 2 /min   - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4100 mm   space requirements -front/back-: 3500 mm   total height: 5600 mm

10 sling chains 3m long 6mm links partially tested in plastic box Condition: clean and technically flawless, little used Auction-ID: A1-46501-1784

Rex vacuum Filler -Type: RVF 736 -Power: 15 kW -Capacity: 3600 kg/h -Serving speed: up to 800 portions/min -Portion range: 5-9999.9 grams -Operated hours: 29337 -Linking and holding device included -Additional funnels included -With loading -Dimensions: 2100 x 1230 x 1950 mm -Power supply: 400V 50Hz 3Ph -Condition: Used in very good condition, ready to work

Description: The SuperPlane laser 3G Pro enables the exact alignment of horizontals, verticals and inclinations throughout the room. The green laser lines offer optimal visibility. This measuring device can also be used to work synchronously on the floor and ceiling. Accurate horizontal and vertical alignment of objects Good visibility thanks to green laser technology Easy alignment of slopes with manual slope function Solder function for synchronous work on the floor and ceiling Suitable for working close to the ceiling and walls Integrated handheld receiver mode for outdoor applications Long operating time due to powerful lithium-ion battery https://www.laserliner.com/export/assets/080.845A_de_60_17.pdf https://www.laserliner.com/export/assets/036.650L_de_60_17.pdf SuperPlane laser 3G Pro with and tripod in L-Box incl. tripod incl. spare battery Auction-ID: A1-46501-715

Cabinet with contents see pictures Auction-ID: A1-46501-716

Brennenstuhl stepladder, folds out four steps, approx. 70 cm high Auction-ID: A1-46501-492

24 pieces of solid composite decking boards with co-extrusion layer with wood grain. Good for 17.7 m2. Can be used on both sides. Color anthracite/gray, unused. 400 cm long, 18 cm wide, 2 cm thick. Auction-ID: A1-40111-360

Stahlkaiser professional stitch ring ratchet set 6-32mm Auction-ID: A1-40418-145

Planed squared timber and roof battens 6x10 5m 4 pieces 6x10 2.6m 2 pieces 4x6 5m 11 pieces Roof battens Auction-ID: A1-46501-2669