an 005 used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Lxz-e8CnyB4 - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-311

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3627

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3510

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3584

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/FQN8gdw6kKI Former Linde full-service machine Width over forks 540 mm Fork length 1,150 mm Battery Li-ION Auction-ID: A1-45451-384

Lead and pull spindle lathe - 4-jaw chuck 315mm - Multifix steel bracket size B - Feed in upper support - Bezel - Machine feet - Chip tray Turning diameter over bed 520 mm Turning diameter over support 260 mm Turning length 1600 mm Speed 14 - 710 rpm Tip height 260 mm Spindle bore 60 mm Total power requirement 11.0 KW Machine weight approx. 2.9 t Space requirement approx. 4.0 x 1.4 x 1.6 m Auction-ID: A7-46460-484

Loading onto trucks no problem Auction-ID: A1-45451-3637

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/IinXrWHefgU - Former Linde full-service device - Battery: 28/2023 24V 3PzS 375Ah, very good performance measured with 25.4V - Attention: Initial stroke (additional stroke for second pallet) does not work Auction-ID: A1-45451-405

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YM1lDvoA_EE - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery:07/05/2019 LI-ION 24V/410Ah, very good performance measured at 25.5V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-310

Loading onto trucks no problem Auction-ID: A1-45451-3635

Charger 24V with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3547

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Q1w7i4cckiM - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 08/2017, 24V 3PZS 375A, good performance measured with 24.6V - Integrated scale Auction-ID: A1-45451-361

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/nPt2eh_AcK0 - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 12/2020 24V C5 300Ah, very good performance measured with 24.6V Auction-ID: A1-45451-340

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3634

Loading onto trucks no problem Auction-ID: A1-45451-3636

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/ilDRr_hXOiw - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 12/2020 24V C5 300Ah, very good performance measured with 24.9V Auction-ID: A1-45451-376

• 3-point suspension (agricultural tractor category) • Hydraulically swiveling (cylinders visible) • Hydraulic hoses available • Support foot present Auction-ID: A3-43524-12276

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3580

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3639

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/IRJMnKG6jX4 - Former Jungheinrich full-service machine - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2015 24V 300Ah, good performance measured with 24.7V Auction-ID: A1-45451-339

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/DH2wS9Fzpbs - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 30/06/2020 24V 375 Ah, very good performance measured with 25.1V - Triplex mast with full free lift - Integrated scale Auction-ID: A1-45451-358

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3553

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/nhNNC63SvDI - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 04/07/2019, 24V 3PzS 375Ah, very good performance measured with 24.6V - Integrated scale Auction-ID: A1-45451-380

Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-46460-414

Guide and tension spindle lathe machine - With photocopying device - 3-jaw chuck 200mm - 2 Mutifix quick-change steel holders - Moving center punch - Machine light - Chip tray Turning diameter over bed 410 mm Turning diameter over support 260 mm Turning length 1000 mm Turning diameter in the offset mm Speed 40 - 2000 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 4.5 KW Machine weight approx. 1.6 t Dimensions approx. 2.4 x 1.3 x 1.5 m Auction-ID: A7-46460-510

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-514

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3551

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vSWYzek0rNs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 20/10/ 2020, 24V 4PzS 500Ah 24.9V , good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-319

Can be loaded with forklift Extra flexible chassis Auction-ID: A3-43525-11046

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3642

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/82BmNy9__DY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, good performance measured at 24.6V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-370

The label printer is in used condition, operation to check. Auction-ID: A3-43525-34011

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3579

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Former Linde full-service machine Attention: without battery Auction-ID: A1-45451-458

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video:https://youtu.be/EV6gEyoyvAM - Former Linde full-service device - Service valid until 03/2027 - Battery: 09/2020 24V 4PzS 500Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-371

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. Powerful 2-speed engine. Left/Right Switch Head swivel left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. Spindle protection. incl. toolbox with various tools Drilling capacity in steel30 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 565 mm Table adjustment longitudinal 220 mm Table clamping area 840 x 210 mm Connection voltage 400 V max. distance between work table and spindle nose max. 470 mm Total power requirement 1.1 kW Machine weight approx. 230 kg Space requirements approx. 0.75 x 1.05 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-546

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video:https://youtu.be/Ae-CCaPDw_o - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 2020 24V 375Ah, very good performance measured at 25.55V Auction-ID: A1-45451-334

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3683

The table is in used but working condition. Auction-ID: A3-43525-34010

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Yxrym1ENzak - Former Linde full-service device - Battery: 29/2018 24V 3TPZS 375Ah, good performance measured with 24.7V Auction-ID: A1-45451-396

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video:https://youtu.be/AVnGwh2t3GQ - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 2020 24V 375Ah, very good performance measured at 25.52V Auction-ID: A1-45451-315

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3451

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3651

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3684

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vBkL7x-0vaA Powerful 48V engine Former Linde full-service machine Battery Li-ION Auction-ID: A1-45451-373

Drilling/milling machine with: • Digital display • Digital depth gauge for quills • Adjustable guides through wedge strips • Large 12-step speed range from 75 - 3200 rpm • Extremely smooth running due to hardened and ground gears running in oil bath • Right-counterclockwise rotation • Prism guides in all axes • Gear head can be swivelled 90° • Chip protection with safety circuit Machine base optional. Not included. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle holder SK 40 Spindle speeds 75 - 3200 rpm Table adjustment transverse 500 mm Table adjustment longitudinal 230 mm Table clamping area 720 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1 kW Machine weight approx. 0.35 t Dimensions approx. 1.1 x 0.9 x 1.2 m Condition: never used / new (5) Auction-ID ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/0svv4EL9nug Powerful 48V engine Former Linde full-service machine Battery Li-ION Auction-ID: A1-45451-372

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3629

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/sjwN5M8EWSw - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 49.9V Initial stroke - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-302

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3583