an 005 used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/8dTe22Qqegk - Former Linde full-service device - Battery: 24V 166Ah, with very good performance measured at 25.3V - Foldable platform Auction-ID: A1-45451-397

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HzI6uidRx6o - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 18/2021 24V 375 Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-337

Lead and pull spindle lathe Three-jaw chuck 200mm Multifix Steel Bracket Size B 3 Multifix cassettes Emergency Stop Facility Turning diameter over bed 370 mm Turning diameter over support 200 mm Turning length 1000 mm Center height 185 mm Spindle bore 56 mm Tailstock quill holder MK 4 Speed 50 - 2000 rpm Drive power 4.0 kW Machine weight approx. 1.4 t Dimensions approx. 2.3 x 1.1 x 1.3 m Auction-ID: A7-46460-403

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/yGXAJKM0BS0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, very good performance measured at 25.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-317

Youtube function and status video: https://youtu.be/q0PF2kLWjA4 - Former Linde full-service device - current service valid until 01/2027 - Current UVV valid until 01/2027 - Triplex mast with full free lift - Foldable platform - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Battery: 05/2019 24V 375Ah, with weak power, measured at 25.4 volts Auction-ID: A1-45451-394

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3632

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5) Auction-ID: A7-46460-501

Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank - Chip protection - 16mm drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle Holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping area 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5) Auction-ID: A7-46460-563

Foreign buyers get the 19% VAT back from the auction house immediately after the machine is exported Youtube function and status video: https://youtu.be/6kWswQc2iMw Former Linde full-service machine Service valid until 04/2026 UVV valid until 04/2026 Battery: 25/2023 24V 200Ah, with good performance, measured at 24.6 volts - does not lift Auction-ID: A1-45451-378

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3704

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3656

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/mC3Ktrhu2oE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 06/2021, 24V 3PzS 375Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-364

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: hhttps://youtu.be/BVkxPHXg7GQ - Former Linde full-service device - current service valid until 01/2027 - Current UVV valid until 01/2027 - Battery: 35/2021, 24V 250Ah, with good performance measured at 24.7V - Foldable platform Auction-ID: A1-45451-307

Peddinghaus Peddimax 602 profile processing machine, suitable for punching, cutting and processing various steel profiles and sheet material. This robust and industrially designed machine from the renowned brand Peddinghaus is designed for intensive use in metal workshops, construction workshops and production environments where power, precision and versatility are of great importance. The machine is equipped with multiple processing stations, allowing various operations to be carried out efficiently on one compact setup. Based on the visible configuration, this installation is equipped for the processing of corners, strips, profiles and holes, which makes it particularly interesting for general steel construction and workshop work. The machine is offered with roller conveyor/infeed table, foot pedal and a range of visible outriggers and accessories, further increasing practicality. Ac ...

Professional lathe 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-498

Drilling/milling machine with: • Drilling capacity 40mm • Milling capacity 32mm • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 730 x 210 mm Connection voltage 400 V Drill feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.1/1.5 kW Machine weight approx. 0.35 t Space requirement approx. 0.8 x 0.75 x 1.85 m Condition: never used / new (5) Auction-ID: A7-46460-536

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/mfdOmjnaY1k - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 24V, very good performance measured with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45451-324

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3650

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3598

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/4xJHbE9sQV0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 10/04/2017, 24V 3PzS 345Ah, very good performance measured with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-466

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YA0qK5c_LvY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 2020 24V 4PzS 500Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-349

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3586

Lathes with: - Copying device - Forkardt 3-jaw chuck F250 - Multifix steel holder - Coolant system - Machine light - Feed protection - Chip tray - Chip protection wall - Foot brake Turning diameter over bed 410 mm Turning diameter over support 220 mm Turning length 1000 mm Center height 205 mm Circumferential diameter in offset mm Spindle bore 46 mm Spindle speeds 40 - 2000 rpm Total power requirement 22.0 kW Machine weight approx. 1.8 t Space requirement approx. 2.42 x 1.3 x 1.55 mm Auction-ID: A7-46460-616

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45451-3541

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jnQzQu44pco - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:03/2018, Li ION 24V 205Ah Auction-ID: A1-45451-374

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/EKd_GIN7ftk Powerful 48V engine Former Linde full-service machine Battery Li-ION Auction-ID: A1-45451-379

Videojet printer 1220 for coding best before and/or lot-number, including 3 print head holders. Auction-ID: A3-43525-5600

Youtube function and condition video: https://youtu.be/8CXIBNCO97U - Former Linde full-service device - valid service until 02/2027 - Valid UVV until 02/2027 - Battery: 24V 270 Ah, with good performance, measured at 24.4 volts - Duplex mast with full free lift - Foldable platform Auction-ID: A1-45451-446

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3630

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/Qg1_SYz7g8Y - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 30/10/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45451-305

Professional lathe Digital display 3-jaw chuck 4-jaw chuck Face Plate Fixed bezel Steady bezel Quick-change steel holder with 4 cassettes Halogen Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Rotating center punch Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-442

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/SCYIV8v2q1Y - Former Still full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 2/2020 24V C5 300Ah, good performance measured with 24.5V Auction-ID: A1-45451-350

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/3eb8PQxBTuk - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-367

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/CEvrZLMrTPc Former Linde full-service machine Powerful 48V device Front tyres AR PU Rear tyres LR Tandem PU Width over forks 540 mm Fork length 1,150 mm Battery Li-ION 48V 20Ah Charger Li-ION 48V 10A onboard Auction-ID: A1-45451-357

Professional Industrial Machine (400Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Face Plate 280mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-571

Youtube function and status video: https://youtu.be/UWKEgI4svU0 Former Linde full-service machine Battery: 14/2020, 24V 375Ah, with very good performance, measured at 25.0 volts Auction-ID: A1-45451-398

3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 320mm Fixed bezel Steady bezel 4-fold steel holder. Halogen Machine Light Machine Light Foot brake Removable chip tray, chip protection wall Hardened and ground bed sheets Complete coolant system Feed protection Machine Tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Dimensions approx. 1.9 x 0.8 x 1.56 m Condition: never used / new (5) Auction-ID: A7-46460-557

Youtube function video: https://youtu.be/vM8odcIpQ8w Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk former Linde full-service machine, Auction-ID: A1-45451-385

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3685

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-306

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3701

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Ov90xShHtTU - Former Linde full-service device - Battery: 29/2018 24V 3TPZS 375Ah - Attention: does not run at the moment Auction-ID: A1-45451-316

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-46460-404

Youtube function and status video: https://youtu.be/dl233vtpC0o Former Linde full-service machine Battery: 20/10/2017 24V 2PZM 250 Ah, with very good performance, measured at 24.9 volts Initial stroke - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-353

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/VCZGeyw-mnw - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 30/05/2017 24V 205Ah, very good performance measured with 25.3V Auction-ID: A1-45451-411

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3633

SINO Digital Display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Face Plate 250mm Fixed bezel Quick-change steel holder with 4 pcs steel holder Machine Light Chip tray, chip protection wall Hardened and ground bed sheets Feed protection Machine Tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Turning diameter in the offset 320 mm Speed 75 - 2000 rpm Tip height 160 mm Spindle bore 38 mm Tailstock quill mount MK 3 Connection voltage 400 V Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m Condition: never used / new (5) Auction-ID: A7-46460-500

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/0X9SfMVZ7Do - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 24V/3PzS/375Ah, good performance measured with 24.5V Auction-ID: A1-45451-345

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/x3tg9I5ps6k - Former Linde full-service device - Battery: 44/2023 48V 375 Ah, very good performance measured with 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-318

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/D-cJO92WeE0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:08/03/2024 24V 3PzS 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-322