ame used for sale

- 1.2 m wide - approx. 2.75 m long - from 0.5 to 1.1 m upward

Technical data: intended purpose: Planks Achsabstand: 2 m rope number: 4 pieces impulse achievement: 4 kW chain division: 125 mms lax strength: 40 x 10 mms

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

The DOOSAN TT 1800 SY lathe, manufactured in 2006, features a FANUC Series 18i-TB control. It boasts robust features such as a sub-spindle, driven tools, dual C-axes, a Y-axis, and twin turrets. Additional amenities include a parts conveyor and a chip conveyor. Note, the automatic bar feeder requires some adjustments for optimal performance. Reach out for more information about this DOOSAN TT 1800 SY lathe.

Purpose: Model + prefabricated wood Axle distance: 1,875 m Rank: 4 Power: 2.2 kW Chain division: 125 mm Tab thickness: 40x10 mm Takeaway distance: 2.25 m Transport by heavy laschenglieder chain with carrier and steel chain wheels, bearing housing made of steel, drive by special gear motor with overload slip clutch, deflection wheels individually clampable, with wear rails on the chain carriers, substructure in Profile steel construction, sloping transport.

Chromatograph made in America For sale chromatograph in good condition. Reason for selling the closure of the enterprise.

pressure:400 t table length:3000 mm table width:2500 mm table extendable:5400 mm table load:50 t dimension of workpiece:mind. 1000×850 mm :min. 400/max. 2800 mm Fold-down upper tool:180 Grad dimensions:8980×4470×8020 mm total weight:92 t engine output:45 kW hydr. components:unter anderem von VICKERS/Amerika LCD Touchscreen with PLC control:S7-1200 mit Siemens Touch Screen Smart1000IE

Technical data: total length: 9.7 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Axle distance: 9.0 m Strands: 5 stk (80/80/1,20/1,80), horizontal Used for: Boards/Schwarten Model Logs Design: horizontal Upgrade plated out 5 sprockets with special gear motor 5.5 hp

to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.

Technical data: Length: 1.0 m Stanganzahl: 4 St Drive: 4,0 KW

19x27x34cm ; 400W ; 230V ; Ideal for small quantities and making sausages. Aluminum housing. Cast iron feed tray with meat holder and dust cover. Tamper made of plastic. Aluminum worm gear and stainless steel blade. Includes 2 plates ̧ 65.8mm: 4mm and 7mm perforations. 3 hoppers for sausages: ̧ 12, 15 and 20mm. Filet Americain accessory. On/off/reverse switch. Not for continuous use. Weight 5.2 kg. Aluminum. Polyethylene. Stainless steel.

Cutting machine brand Urshell model GA for potatoes, vegetables, peaches, tomatoes etc in excellent condition stainless steel, high capacity. Cuts rattan, various sizes and completely straight, slices in various sizes and cube 20x25x25. American technology with minimum cutting blade. It has been recently serviced. It has knives for spades, feta and set knife cube..

Overview This can filler Gosling from American manufacturer Wild Goose was built in 2021. It is in very good condition and was regularly maintained.  The canning system is becoming free as the previous owner is investing in a larger machine. Technical Details Capacity: 720 cans/ hour Can sizes: 236-946 ml with a 200-300 lid type Machine dimensions (LxWxH): 1120 mm x 660 mm x 1040-1090 mm Machine weight: 125 kg Rated Voltage: 230V CE-Certified

American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns

Technical data: with driven rollers Roll width: 1,200 mm Wide lifting table 1,400 mm Length lifting table: 3,350 mm Height retracted: 900mm Max lifting weight: 5 to Lifting height: 1,000 mm Platform size (length x width) With built-up roller movement: Roll length: Roll diameter: 164mm Roll spacing: 640mm

consisting of: Filler Cimec America with 24 filling valves, with double pre-evacuation Crowner Arol Esse with 4 closing heads

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Globe trim saw (compensation saw) for plywood, built 2006Herstellung: globe machinery U.S. (for the plywood industry) Globe deals since its foundation in 1917 with improving plywood machines, a tradition that the up to date with a comprehensive machine park for material processing fortsetzt.vom dryer outlet to the finished Produkt.Die globe cross-cut saws (in North America as)

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

Automatic case packaging machine (rebuilt in 2012) for american cases. Machine including feeding system, 2 formats (incl. Seidenader camera vision system), and other accessories. Furthermore including exit belt with PAGO labeling system.

Batch mixture, approx. 100 t/h, mixed material silo TELTOMAT with bucket lift, 4 main chambers + additional chamber (total capacity: 160 t), sieve and dry drum, 2-shaft forced mixer, 30,000 L heating oil tank, AMECO filter system, 3 bitumen tanks, 2 silos with screw conveyor

Oven 700 1.3x1.3x1.5m Auto door PLC top quality Giessereianlagen Giessereimaschine Giessereimaschinenbau Giessereitechnik Giessereizubehör Glasschmelzöfen H aubenöfen Herdwagenöfen Hochtemperaturöfen Induktionsanlagen Industrieöfen Industrieofenanlagen Industrieofenbau Kammeröfen Keramikbrennöfen Kippofen Kupolöfen Laboratorien Laboröfen Lötofen Maschinen Muffelöfen Nachverbrennungsanlagen Öfen Ofenanlagen Ofenbau Ofenbauzubehör Prozessanlagen Prozesssteuerungssysteme Pyr lyse Pyrolyseöfen Regelungstechnik Retortenka meröfen Retortenofen Rohrofen Salzbadöfen Schmelzofen Sinteröfen Thermoprozessanlage Thermoprozesstechnik Vakuumglühofen Vakuumkamme fen Veraschungsöfen Versuchsofen Vorwärmofen Wachsausschmelzverfahren Wannenofen Wärmebehandlung Wärmebehandlungsöfen Wärmebehandlungsverfahren Wärmerückgewinnungsanlagen Warmhalteofen Poreba Gurut ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

cutting range for steel to: 25,0 Trennschnitt mm cutting range for steel to: 20,0 Qualitätsschnitt mm capacity at 100%: 25,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,9 KW voltage: 230 V range L-W-H: 505 x 147 x 305 mm weight: 8,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The AVALON 40.1 PFC is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and ease of use Handling makes them the ideal candidate for trade, workshop and industry. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing ...

cutting range for steel to: 18,0 Trennschnitt mm cutting range for steel to: 14,0 Qualitätsschnitt mm capacity at 100%: 30,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,7 KW voltage: 230 V range L-W-H: 480 x 210 x 340 mm weight: 17,9 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The air plasma cutting system Avalon 40.1 Air with integrated compressor is Your reliable partner for demanding applications. Run with the Avalon 40.1 Air cuts up to a material thickness of 18 mm. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc o ...

cutting range for steel to: 35,0 Trennschnitt mm cutting range for steel to: 25,0 Qualitätsschnitt mm capacity at 100%: 61,0 Ampere cutting medium: Druckluft output: von 20 - 65 Ampere output: Eingang 7,8 KW voltage: 400 V range L-W-H: 595 x 250 x 890 mm weight: 24,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent  ...

KVM 125/105 Block/Paving Plant complete 1999 NEW PRICE! KVM PLC control, Curing Rack System. Finger car systems. Elevator system 10 levels, Coloring system. 2 Moulds, Palletizer system, Skako 1125 L batching plant complete. Plant is in good condition and was shut down in 2020. The plant can be seen after appointment. We can assist with dismantling, packing and shipping. Amexpo Consult, Merkurvej 31, 9370 Hals Denmark. +45 29251017

KVM 62/80 Pavingstone machine, 2005. Hydraulic Powerpack, KVM PLC Control, Pallet size 900 x 750, Moulds. Machine was shut down in 2010 due to a merger between 2 companies. The machine has only been in operation for 5 years and is in very good condition. PRICE INCLUDES DISMANTLING. Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

General Fully automated concrete pipe factory. Pipes are produced with self compacting concrete (‘wet cast’) which makes the operation labour friendly (low noise and no vibration) and gives state of the art products: every pipe has exactly the size, with a flat surface and is very easy to install by constructors. Video`s is available upon request. Plant can be seen after appointment, Amexpo Consult Merkurvej 31, 9370 Hals Denmark +45 29251017

BEING NEGOTIATED Sumitomo Demag 280 ton Systec SP 280/630-840 year of manufacture 2014 280 Ton Clamp 2800kn Tie Bar Dist 630 Injection unit 840 Made in Schwaig, Germany 400v 50hz Exworks South America

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Specifications: Master and model inserts Length: 6.5 m Width: 2.3 m Number of lifting arms: 4 - heavy insertion arms - with built-in tapered rollers - Substructure in heavy steel construction - built-in roller rails - 4 strands with roller rails Condition as new, with functional review, to the exclusion of any Warranty

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Specifications: Master and model inserts Length: 5.7 m Width : 1,7 m Number of lifting arms 5 - heavy insertion arms - Substructure in heavy steel construction - built-in roller rails - 5 strands with roller rails Condition as new, with functional review, under exclusion of any warranty

Box monoblock TMG Year: 1999. Speed: 2.500 bph. Box forming machine - American carton Case packer - 6 heads Box closing machine – hot glue Safety protections

bottling line AVE - 2005 speed: 2.500 bph for sparkling wine 3.000 bph for still wine. Depalletizer GP ENGINEERING mod. COMPACT 52 Filling monoblock isobaric AVE 24.24.6: Rinser 24 clamps single treatment - fixed nozzle Filler 24 valves with pre-evacuation and self-leveling Corker 6 head natural straight cork and mushroom cork. Caps orientator AVE Bottle washer/dryer CAMES mod. W DT 3/8 Capsuling machine ROBINO & GALANDRINO mod. FENIX 2 suitable for pvc and polylaminate capsules Labeller AVE adhesive and cold glue mod. 12T 4S 4E suitable to apply: Front label and back label (adhesive and cold glue). Packing monoblock GP ENGINEERING mod. ISOLA 700: Box forming machine - american box Case packer single head with adjustable head Hives inserter AVE Box closing machine above and below hot glue AVE Palletizer GP ENGINEERING mod. PABR 50 Wrap pallets semiautomatic AVE Le ...

Machine Details Stock-No. 1105-03789 Type of machine Machining Center - Vertical Make CINCINNATI Type sabre 1250 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin UK Delivery time immediatly Freight basis FOT Technical details X-Travel 1270 mm Y-Travel 762 mm Z-Travel 820 mm spindle 11 kW spindle turning speed range 60-8,000 rpm toolpiece magazine: chain magazine 21 pieces tool taper DIN 69871 ISO 40 table-size 1,370 x 760 mm control fanuc om total power requirement 30 kVA weight of the machine approx. 9 t Additional information FANUC OM Technical details and information subject to amendments and errors.

American can sealer 4 heads for 4 diameters. From Coca Cola small cans until 20 cm diameter High up to 45 cm high This machine was used with the following size r=10 cm, h= 18,2 cm for 500 gr of roast coffee. Shipping possible IMPORTANT: Watch out for scams happening on Resale: don't reply emails that are not coming from the seller especially those offering a discount from the advertised price without previous discussion, don't do open requests on resale because everybody will see your data and this is where the scam is starting, try to speak with the seller by phone before purchasing, always verify that bank details are matching with the invoicing company and VAT number, reports any email looking like this: "we can offer you a 20% discount due to stock streamlining.") Copy paste this URL link to see the machines listing: abcs://abc.resale.info/angebotelink-user.php?myid=56090 ...

1 of used, combined canning and bottling line for beer or soft drinks, new 2016. Consists of the following equipment: - Semi-automatic, high-level, sweep-off, bulk can depalletizer, make COMAC. - Gravity can twist-rinser, make Eurosistemi, type GRV. This is a twin lane unit for 330- and 400/500-ml cans. - Can filler/seamer, make Comac, type Pegasus 8/1M. Output: 3,500 cph x 330ml (202/211 lid/body). - Vacuum Barrier Corporation liquid nitrogen dosing system for cans. - Level detector/rejector, make FT Systems. Checks for under- and overfills. - Assorted can and bottle conveyors. - VFDs for conveyor motors (control panel itself not available). - Self-adhesive labeller, make BRB, type MEGA ADE 622, 2 label stations (front/back wrap-around), rated at up to 4,000 cph / bph. - Semi-automatic carbonator/nitrogenator. Skid-mounted unit complete with stainless steel control panel, m ...

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Electric motor, single-phase motor AEG Type: AMES 80 NY6R3 Y4 ( AMES80NY6R3Y4 ) 0,37 kW 890 rpm 220 V 1AC IP 54 shaft diameter: Ø 19 mm double pulley: Ø 86 / 66 mm x 10 mm spare part for STRAPEX strapping machine !, among others! used, tested ! Dimensions: 280 x 180 x 210 mm

Key data: 510 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03907 Type of machine Machining Center - Vertical Make MORI SEIKI Type CV 500 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time CALL ME Freight basis EXW (Incoterms 2010) loaded on Technical details X-Travel 510 mm Y-Travel 510 mm Z-Travel 510 mm control MSC 803 number of spindle speeds 8000 spindle drive 7.5 kW Rapid Travel X/Y/Z 42/32 mm/min table-size 750 X 550 mm tool changing time 1.5 sec tool magazine: 25 BT 40 total power requirement 51 kW Weight of the machine approx. 4 t Accessories Memory 640 m Helical Interpolation Cylinder interpolation Additional information ROTARY DOUBLE TABLE CNC MSG 803 Technical details and information subject to amendments and errors.

Piston rod with piston, without seals ALLIED MACHINE & ENGINEERING CORP. (AMEC) Rod diameter: Ø 25 mm Piston diameter: Ø 40 mm Rod length: 660 mm Total length: 760 mm Rod thread: M16 x 2.0 unused ! Dimensions (package): 830 x 55 x 65 mm

spindle tilting: + 45,5° bis -45,5° ; height adjustment: electrically; tilting adjustment: electrically; fence adjustment: electrically ; altitude display: digital; swivel angel display: digital; fence display: digital; spindle: MK 5; speeds: stepless 900 †12000min¯¹; power consuption: 7,5 kw; motor brake: yes, automatically; suction connection: 3 x 100 mm, 1 x 120 mm; machine length: 2540 mm; machine width: 1195 mm; weight: 950 kg; Highly stable steel gray cast iron construction Large work table made of gray cast iron Electric spindle drive 7.5 kW with maintenance-free direct drive guarantees maximum precision through maximum smoothness Maximum power is already available from 3400 min¹ Precision aggregates and high own weight Rapid table insert, infinitely manually adjustable to tool diameter (optionally electronically positionable) Standard with righ ...

Maintenance Unit SMC 1x AME250C-F03 ( Super Microfilter ) 1x AMF250C-F02 ( odor filter ) 1x AR30-F03-Y-B ( Modular Controller ) 0.5 - 8.5 bar used, tested ! Dimensions: 275 x 175 x 85 mm