128,039 used machines on RESALE, but how to find them? Machine Search
Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg
Sealing punch Deventer (Ref. No. 160-2665) for window seals Cutting width 30 mm L x W x H: 150 x 250 x 200 mm Weight approx. 3 kg The machine is in good condition, ready for operation Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg
Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg
Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1
used
WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg
Offer 23293 Specifications: - Printing capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - Infinitely adjustable stroke 0 to 28 mm - Stroke rate 26 to 36 1/min - Projection 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - Weight approx. 1300 kg - With: - Foot switch - Grain detection device, - Support table with foldable stops W 1100 x D 850mm - Sliding paths of the stops from the center of the punch - Width between Li and Re approx. 470 mm x D 510 mm
Book spine punching machine Schmedt Präcut HHS 6501; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 knives. Book block spine machine Schmedt Präcut HHS 6501; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knives.
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaw -Ironing material: Aluminum -Punch dimensions: see photo with dimensions -Quantity: 2 pieces -Price: per piece -Dimensions: 240/145/H210 mm -Weight: 22.5 kg/pc.
Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg
max. plate width: 80 cm stamp width: 425 mm serial no.: 564 plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 plate clamping system: autoplate plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 920 cm stamp width: 425 cm Dimensions (L/W/H): 550/1000/1220 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 74 cm stamp width: 340 mm serial no.: 13434 dimensions of press (L x W x H): 80 x 95 x 120 cm weight: 100 kg Thermo plate bender for The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg
max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. plate width: 1520 cm stamp width: 780 mm dimensions of press (L x W x H): 150 x 58 x 128 cm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Serial No.: 1704 Punching capacity: Ø 28 x 16 Available with special tools: Ø 100 x 4 Year of construction: 1997 Country of origin: Italy
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Key data: 55 t
Specifications Model No.: PM-55T Serial No.: 94713 Punching pressure max: 55 tons Punching capacity max.: Ø 22 x 18 mm Diameter x thickness: Ø 50 x 8 mm Engine power (kW): 3.7 Working height: 1050 mm Projection: 310 mm Table size (LxW): 700 x 500 mm Weight: 1620 kg Year of manufacture: 9/1999 Country of origin:Taiwan
: 100 t diameter: 40 mm throat: 760 mm total power requirement: 8,5 kW weight: 3.600 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg
Key data: 75 t, 80 mm, 250 1/min
Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm
Roller feed KAISER ZR 12 Belt width - 120 mm Feed length 100 mm Feed angle - adjustable - 90 - 180 degrees Tech. Condition - good, complete With pneumatics. Spare parts Btto 250 kg
Key data: 30 t, 100 1/min
Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate
Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg
Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg
Offer 23481 Specifications: - Printing capacity 30 t - max. sheet thickness 6 mm - Max. punching diameter 105 mm - Stroke 42 mm - Projection 700 mm - Maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - Table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - With: - Bulletin table with adjustable stops - Quick-change punch device - Foot switches; - Emergency stop button - Various punches + dies in separate workbench
Die holder, notching tool, punching tool, punch, punching die, punching punch, punching die, round die, die reduction -Manufacturer: Mubea, punching tool holder die reduction -Type: 105 - 80 mm mounts -Dimensions total: Ø 150 x 60 mm -Weight: 4.7 kg
Automatic Die-Cutting/Lable Punching Machine, Max. Punching Size: 180x180mm, Min. Punching Size: 20x20mm, Max. Feeding Height: 150mm, (Height of Punching Die 60/70mm), Punching Strokes 12 p/min., Machine Output 720.000 Sheets/Hour, (Insertion 1000 Sheets/80gsm), Punching Pressure 2.500 Kg
2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm -Weight: 23 kg
maximum number of results exceeded
please refine your search
