amada punch used for sale

A CNC press brake Amada is available. Press force: 800kN, bending length: 2500mm, press beam length: 2570mm, distance between uprights: 2125mm, throat depth: 420mm, max. stroke: 350mm, installation height: 620mm, table width: 60mm, table height: 960mm. Machine dimensions X/Y/Z: approx. 3300mm/1600mm/2750mm, weight: approx. 6100kg, control system: Amada. Documentation available. An on-site inspection is possible.

4000 x 8mm with rear sheet supports

This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details.

A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible.

This 3-axis AMADA LC-2415αIII was manufactured in 2000. It features a laser power of 2 kW and a maximum sheet format of 1,500 x 5,000 mm. The machine has been regularly maintained by Amada Switzerland and includes a newly installed turbo-blower in 2024. If you are looking to get high-quality laser cutting capabilities, consider the AMADA LC-2415αIII CO2 laser cutting machine we have for sale. Contact us for further details.

This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details.

A hydraulic AMADA NC guillotine shear is offered. Cutting length: approx. 3050mm, max. sheet thickness: approx. 6mm, min./max. cutting angle: approx. 0.4°/2.2°, backgauge travel: approx. 1000mm, backgauge traverse speed: 100mm/s, max. stroke: approx. 160mm, max. stroke rate: 45strokes/min, control: AMADA NC control. Including sheet handling system. Machine dimensions X/Y/Z: approx. 3800mm/2250mm/2100mm, weight: approx. 6500kg. Inspection by appointment possible.

Manufacturer: Amada Year of manufacture: 1999 Model: GS 630 Type of machine: Hydraulic Shear Cutting force: 197 KN Power: 5.5/7.5 KW/HP Stroke: 160 mm Voltage: 400/415 Volts Amperage: 16 A Frequency: 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 330 mm saw band length: 4115 mm cutting width: 0,9 mm main drive motor: 3,7 kW Roller conveyor length: 5000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 13 KVA weight of the machine ca.: 1,8 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 400 mm saw band length: 4715 mm cutting width: 1,3 mm main drive motor: 7,5 kW Roller conveyor length: 4000 mm Roller conveyor width: 700 mm roll diameter - bore: 150 mm total power requirement: 14 KVA weight of the machine ca.: 7,5 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this a ...

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2500x1300 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...

cutting diameter: 1300 mm saw band length: 11880 mm cutting width: 1,6 mm main drive motor: 11 kW table surface area: 2300x1200 mm cutting range: 1300x1300 mm total power requirement: 16 KVA weight of the machine ca.: 17,75 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS ...

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1000 mm saw band length: . mm cutting width: . mm main drive motor: . kW cutting range: 1000x1000 mm total power requirement: . KVA weight of the machine ca.: . t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of  ...

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 92.0 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 36.160 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours () - Inspected condition - Machine video - https://www.youtube.com/watch?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) CNC-controlled backgauge adjustment (X-axis) CNC-controlled vertical adjustment of the stop fingers (R1+R2) CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) Hand control unit for manual axes movement Pivoting control, front left - AMADA/PROM ...

pressure: 80.0 t chamfer lenght: 2550 mm distance between columns: 2130 mm column arm: 420 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec stroke: 200 mm dayligth: 470 mm table width: 60.0 mm table height: 910 mm Number of working hours: ca. 37.102 h total power requirement: 9.0 KW weight of the machine ca.: 5750 kg range L-W-H: 3100 x 2180 x 2540 mm good / well-maintained condition () - Inspected condition - Machine video - https://www.youtube.com/watch?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools  ...

pressure: 80.0 t chamfer lenght: 2570 mm distance between columns: 2125 mm column arm: 420 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm dayligth: 470 mm table height: 960 mm Number of working hours: ~ 33.100 h oil volume: 90.0 l total power requirement: 9.0 KW weight of the machine ca.: 5750 kg. range L-W-H: 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQ Equipment: - AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top t ...

sheet width: 3050 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm : 8.00 mm down holder: 10 Stück cutting angle: 0°40 - 2°20 Grad : 3340 mm work height max.: 860 mm : 575 mm Control: GP 37W2 : 13 - 33 0: max. 315 bar oil volume: 100 ltr. total power requirement: 6.0 kW weight of the machine ca.: 6030 + 1850 kg In good condition () current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left (GP 37W2) Machine control including information display Main display with 4 control panels Control/operation of all functions Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle ad ...

AMADA ITS2 2 ist eine Abkantpresse mit hoher Präzision, entwickelt für große Genauigkeit und Zuverlässigkeit. Kapazitäten: gesamt 4 Achsen, Druckkraft 25 t, Biegelänge max 1250 mm, Durchgang zwischen Pressbalken 320 mm, Abstand Ständer 1020 mm, Hub max 100 mm, Ausladung 200 mm. Technische Daten: Zustellgeschwindigkeit 75 mm/s, Arbeitsgeschw. 10 mm/s, Rückhub 80 m/min, Tisch 1200×60 mm H 865 mm, Ölfassung 30 l, Anschluss 3x400 V 50 Hz, Motor 4 kW, Gewicht ca. 1600 kg, Abmessungen L1800×B1200×H2000 mm. Erreicht enge Toleranzen; Anwendungen: Automotive, Luftfahrt, Werkzeugbau, Medizintechnik, Uhrenindustrie. Technische Daten ohne Gewähr

Amada HFE M2 5012 Abkantpresse (2021) Hersteller: Amada Typ: HFE M2 5012 Abkantpresse Zustand: gebraucht, unter Strom in Produktion Baujahr: 10/2020 Einschaltstunden 6830h Arbeitsstunden: 417h (wird noch eingesetzt) Presskraft (kN) 500 Pressbalkenlänge (mm) 1270 Durchgang zwischen den Maschinenständern (mm) 1035 1 Hub (mm) 150 Öffnungsweite ohne Stempelhalter (mm) 480 Ausladung (mm) 100 Arbeitshöhe (mm) 920 Arbeitsgeschwindigkeit (mm/sec) 15 Zustellgeschwindigkeit (mm/sec) 185 Öffnungsgeschwindigkeit (mm/sec) 185 Abmessungen: Länge (mm) 2585 Breite (mm) 2190 Höhe (mm) 2420 Gewicht (kg) 3600

Amada Promecam 420 GTH Tafelschere Hersteller: Amada Typ: Promecam 420 GTH Zustand: gebraucht Schnittlänge: 2000 mm Materialstärke: 4mm in Stahl Hinteranschlag: elektr., 750 mm Motorleistung: 5,5 KW Gewicht: ca.3300 Kg

Key data: 80 t

IMPORTANT: If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport A high-precision and flexible 8-axis CNC press brake from the market leader Amada is being sold. The machine is in first-class, operational condition and has been professionally serviced on a regular basis. 8 controlled axes for complex bending sequences without time-consuming changeovers equipped with the latest AMNC 3i multi-touch control including extensive cabinet Press force: 80 tons / bending length: 2,500mm VHB on request - unrealistic offers will be ignored!

This machine is suitable for unmanned loading and unloading of punched sheet metal on an AMADA Punching Machine. Suitable for plates up to 2500 x 1250 mm. Auction-ID: A1-47358-12

General Description CNC laser-punch combination machine manufactured by AMADA , model EML 3610 NT . Combines high-speed CNC turret punching with 4 kW CO₂ laser cutting in a single production system. Equipped with automatic sheet loading and unloading for efficient, largely unattended sheet-metal processing. Technical Details Manufacturer: AMADA Model: EML 3610 NT Machine type: CNC laser-punch combination machine Year: 2006 Serial number: 43610024 Laser: 4.0 kW CO₂ Punching force: 300 kN (30 t) Working area: Approx. 3,050 × 1,525 mm Z-turret with 45 tool stations 4 auto-index stations AMADA / FANUC CNC control Automatic sheet loading and unloading system MP300 material handling system Donaldson Torit DCE extraction / dust collection system Turbo blower replaced approx. 400 operating hours ago Vacuum pump replaced approx. 600 operating hours ago Dimensions Machi ...

\" General Description CNC turret punch press manufactured by AMADA , model Aries 222 . Designed for CNC-controlled punching and nibbling of sheet metal using interchangeable turret tooling. Supplied with a substantial additional assortment of punches, dies and tool holders. Technical Details Manufacturer: AMADA Model: Aries 222 Machine type: CNC turret punch press Year: 1990 (March) Serial number: 22250177 Punching force: 200 kN / approx. 20 t CNC control: AMADAN 03P Turret: 10 stations Working area: Approx. 600 × 600 mm Working area with repositioning: Up to approx. 600 × 1,200 mm Maximum mild-steel thickness: Approx. 4–4.5 mm Nominal power: 9 kVA Machine weight: 4,100 kg Included Equipment Large assortment of punch tooling Punches and dies Spring-loaded tool holders / assemblies Round, square, rectangular, slot and various profile tooling Tool storage rack ...

General Description Fully automated robotic press brake bending cell manufactured by AMADA , model ASTRO II 100 NT / HDS 1030 . Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automa ...

Serial number: 22602005 Workpiece diameter: 10 -76.3 mm Maximum loading length: 6000 mm Maximum loading weight: 2160 kg Saw blade diameter: 285 mm Power: 7,5 kW Auction-ID: A7-40851-1

Auction-ID: A1-49309-3

Band Saw AMADA® HA - 400 ( HA-400 ) Saw band dimensions: 4570 x 32 x 1.066 mm Cutting capacity: 406 x 406 mm Cutting speed: 15- 75 m/min Roller conveyor: approx. 1.8 m Connected load: 7.55 kVA Belt motor: 5.5 kW Hydraulic pump: 1.5 kW Coolant pump: 0.18 kW Operating voltage: 220 / 380 - 415 V 3AC 50 Hz with documents ! Dimensions: 3970 x 2400 x 1800 mm Auction-ID: A7-49701-13

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

Standard equipment; Ready

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

in 2005 refurbished Still in operation: Yes Available: immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Sample punch for specimen DIN 527-2 mm. suitable for elastomers, paper, cardboard and foil. NEW.

M.- No. : 827

Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used