amada punch used for sale

Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forming line: - System clamping force max.: 200 kN - Max. tool size: 2,000 mm x 1,700 mm - Lifting height: 1,500 mm - Min. opening width: 2 025 mm - Max. opening width: 3 525 mm - Tool weight max.: 20 tons Max. cycle time: 3.9 min. Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz AC voltage: 230 V AC 50 Hz Rated Current: 135A Fuse: 160A Control voltage: 24 V DC Pneumatics Operating pressure: min. 6 bar Connection: 3/4\" Air consumption: approx. 5 m³/h Hydraulics Operating pressure: max. 190 bar Hydraulic station, Simatic control, system is designed for robot assembly The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be inquired by the buyer himself Auction-ID: A1-48512-3

Punching and nibbling machine - Digital display for X and Y - Tool cabinet with tools Sheet width 750 mm Sheet length: 1250 mm Sheet thickness 4 mm Table area 1600 x 1050 mm Stroke rate 180 stroke/min max. punching diameter 105 mm Punching pressure 25 t Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions L x W x H 1.9 x 1.9 x 1.7 m Auction-ID: A7-48486-66

Rotary Die Cutter Equipped with : FFU-4055 flat feeder unit RD-4055 rotary die cutter SPC-4055 separator

Incl. various dies WITHOUT dies Pick-up date: 10.08 - 12.08 Auction-ID: A1-48584-9

Finn-Power A5-25 FB Punching Machine Type: Punching machine Manufacturer: Finn-Power Model: A5-25 FB Year of manufacture: 1999 Punching capacity: 23 t Max. sheet thickness: 4 mm Approx. machine weight: 12,000 kg Approx total dimensions (L x W x H): 6000 x 6000 x 2000 mm X/Y-axis feed rates: 2500/1250 mm JETCAM software Tools: Included Brush table Max. hydraulic pressure: 300 bar Power supply: 3 x 400 V, 50 Hz Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-48274-6

Power: 9 kW Working parameters: 110 t – Gooseneck 500 mm – Adjustable stroke 0 to 60 mm – Cadence 37 rpm (stroke 20 mm) Steel capacity 45 kg/mm²: Ø 40 × 14 mm – Ø 28 × 16 mm Equipment included: 20 sets of punches and dies Ø 8 to 27 mm – Semi-paxy stop capacity 1000 – Fagor numerical control Power supply: Pump 28 l/min – 230 bar Year & Manufacturer: 2007 – GEKA Dimensions (mm): 1300 × 1300 × 1850 Weight (kg): 1715 Remarks: Serial No. 10138 1955 included in the description. Auction-ID: A1-48608-17

Impressions=17 m, Condition= Very Good , Availability= 2026-07-11, Maximum sheet size: 760 × 600 mm Maximum die cutting size: 743 × 585 mm Minimum sheet size: 279 × 210 mm Paper: 100 g/m² and above Board: up to 1,500 g/m² (approx. 1.8 mm) Plastic materials (PET, PP, PVC): up to 1,500 g/m² Maximum speed: 5,500 sheets/hour Maximum cutting pressure: 165 tons Gripper margin: 10 mm Machine dimensions: approx. 4.87 × 2.69 m Weight: approx. 5,500–6,000 kg Features: Automatic die cutting Creasing Embossing Hot foil stamping

: neu : ca. 8 Wochen ab Auftragse : Spanien : 7570 € : 146.1 € : 50 to : 130 mm : 27/13 mm : 23 1/min : 3 kW : 1100 mm : 900 mm : 1550 mm : 355 kg portable, hydraulic punching machine table with gauge foot pedal user manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Boschert Year of Manufacture: 2014 Model: Compact 1000 Rotation Type of Machine: CNC punching machine with rotating head TECHNICAL SPECIFICATIONS - Punching force: 28 t (280 kN) - Tool system: Trumpf tool system, sizes 1 to 3, up to diameter 105 mm - Rotating head: all tools infinitely rotatable 360 degrees - Control unit: Boschert CNC 32050 control unit with TFT control panel - Working area: 1060 x 2080 mm - Sheet thickness capacity: up to 6 mm steel - Power supply: 3 x 400 V / 50 Hz - Connection load: 18 kVA - Control voltage: 24 VDC - Required fuse protection: 3 x 20 A METER READINGS (FROM CONTROL UNIT) - Machine on: 5,722 hours - Hydraulics on: 1,285 hours - Stroke counter: 2.3 million strokes Find more here - / Contact us at -

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-48621-324

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-48622-324

: neu : 2025 : 090185 : prompt, Zwischenverkauf v : Polen : 7950 € : 153.44 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 11500 € : 220.8 € : 1 : 55 to : 500 mm : 40 x 10 mm : 37 1/min : 5 kW : 1550 mm : 1200 mm : 1950 mm : 1150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 979 € : 1 1/2 48,3 mm, 2 60,3 m mm : 3 mm : 2.5 mm : 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2",) and 60.3 mm (2",). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2012 : 9403 : prompt, Zwischenverkauf v : China : 180 € : 1 : 1/4, 3/8, 1/2 mm : 4 kg operation by hand lever and eccentric 3 tube diameter combined in one assembling and welding of tubesin 90 degrees angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ponscapaciteit: 80 ton Diameter x plaatdikte: 40 x 15 mm / diameter 60 x 10 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 120 x 120 x 13 mm Hoek van 45° afgesneden: 90 x 90 x 10 mm Rond op lengte snijden: 45 mm Op maat gesneden vierkant: 40 mm Maximale materiaaldikte door inkepingen: 90 x 10 x 13 mm Length: 1800 mm Depth: 900 mm Height: 1800 mm Weight: 2380 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292500 € : 30 to : 3000x1500 mm : 3000 mm : 1500 mm : 70 m/Min : 60 m/Min : 120 m/Min : 40 mm : 1200 1/Min : 325 1/Min : 2800 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 28 : 0,1 mm : 0,05 mm : 22 U/Min : 150 U/Min : 200 kg : 940 mm : 6 bar : 88.9 mm : 15 kW : 180 l : 6650 mm : 7650 mm : 6300 mm : 8300 mm : 2310 mm : 18250 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50, ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 15600 € : 299.52 € : 55 to : 750 mm : 40x10 mm : 37 1/min : 5 kW : 1930 mm : 1200 mm : 1800 mm : 1885 kg hydr. drive Support table with stop Operating instructions in GERMAN and ENGLISH CNC options on request We have an extensive stock of punches and dies at your immediate disposal. WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 23400 € : 449.28 € : 110 to : 500 mm : 40x20 mm : 28 1/min : 9 kW : 2080 mm : 1300 mm : 2050 mm : 3150 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5104 € : 98.51 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 209800 € : 3371.76 € : 20 to : 2000x1250 mm : 2000 mm : 1250 mm : 90 m/Min : 70 m/Min : 114 m/Min : 1100 1/Min : 375 1/Min : 1200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 30 U/Min : 150 U/Min : 100 kg : 940 mm : 6 bar : 88.9 mm : 7.5 kW : 5600 mm : 6600 mm : 4200 mm : 6200 mm : 2310 mm : 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 5932 € : 114.49 € : 3/4 26,9 mm, 1 33,7 mm, mm : 5 mm : 3 mm : 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4",), 33.7 mm (1",), 42.4 mm (1 1/4",), 48.3 mm (1 1/2",) and 60.3 mm (2",)and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints. The data for this ad wa ...

: gebraucht : 2001 : 9647 : prompt, Zwischenverkauf v : Italien : 24400 € : 1 : 30 to : 1250+N x 1000 mm : 1250 mm : 1000 mm : 40 m/Min : 30 m/Min : 50 m/Min : 30 mm : 730 1/Min : 300 1/Min : 980 mm : 4 kW : 115 l : 4000 mm : 2780 mm : 1900 mm : 4000 x 2300 x 1900 mm + Z mm : 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/ ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 1063 € : 1 1/4 42,4, 1 1/2 48,3 mm : 3 mm : 2.5 mm : 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 249800 € : 30 to : 2500x1250 mm : 2500 mm : 1250 mm : 116 m/Min : 80 m/Min : 140 m/Min : 40 mm : 1200 1/Min : 425 1/Min : 3200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 22 U/Min : 150 U/Min : 120 kg : 940 mm : 6 bar : 88.9 mm : 15 kW : 5750 mm : 6800 mm : 5360 mm : 7360 mm : 2310 mm : 12960 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Station D Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 11 x B-Station fix: 12,8 - 31,7 mm 2 x C-Station fix: 31,8 - 50,8 mm 1 ...

Punching machine TRUMPF TruPunch 5000

Technical data Manufacturer: BRUDERER AG Model: BSTA 50 tbsp Machine Type: CNC Heavy Duty Punching Machine Year of Make: 1991 Machine number: 9666 Press force: 500 kN (50 t) Connected load: 40 kW Main motor power: 25 kW Mains voltage: 380 V / 50 Hz Control voltage: 24 V DC Compressed air connection: 6–10 bar Operating hours: approx. 49,637 h Belt passage width: max. 256 mm Dimensions machine with BBV 202: 2390 x 1270 x 3090 mm Machine weight: approx. 8150 kg Configuration BRUDERER BBV 202/120 Tape Feed KOHLER straightener 100.180/2.500.2M, built in 1992 Decoiler / Coil Decoiler Soundproof booth Conveyor belt for parts ejection Lifting and sorting device for containers Roller conveyors and storage racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of precision punching mac ...

Technical data Manufacturer: H. Raster KG, Oetisheim/Württemberg Model: HR 25-SL Machine Type: High-speed punching machine / eccentric press Year of Make: 1969 Serial Number: 125 Press force: 25 t Table size: 550 x 315 mm Max. sheet width: 100 mm Feed length: 0–150 mm Stroke adjustment: 8–36 mm Plunger adjustment: 70 mm Projection: 150 mm Stroke rate: 120–600 stroke/min Drive power: 6.5 hp Machine weight: approx. 3,200 kg Configuration Electric control panel Stroke rate indicator (stroke/min) Hour meter Protective cover in the work area Documentation/operating documents available Auction-ID: A1-48536-122

Technical data Manufacturer: BRUDERER AG, Arbon (Switzerland) Model: BSTA 40 Machine Type: Precision Automatic Punching Machine / Heavy Duty Punching Press Year of Make: 1978 Machine number: 4945 Electrical connection: 380 V / 50 Hz Stroke rate: 70 - 500 strokes/min Maximum stroke: 57 mm Feed system: BRUDERER BBV 200/120 or BBV 200/150 suitable Configuration Precision punching machine BRUDERER BSTA 40 Separate control panel Soundproofed Protective Cabin Tool clamping plates installed Mechanical high-performance drive Automatic belt feed prepared Solid machine design for continuous operation Auction-ID: A1-48536-124

Due to the insolvency of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-48903-273

From the insolvency of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-48903-272

Technical data Manufacturer: BRUDERER AG, Switzerland Model: BSTA 50 Machine Type: Precision punching machine Year of Make: 1979 Press force: 500 kN (50 t) Tape feed: BRUDERER BBV 202/120 Stroke rate range: 100 to 1200 stroke/min (stroke dependent) Max. stroke: 51 mm Stroke rates: 100-630 stroke/min at 51 mm, 725 at 44 mm, 780 at 38 mm, 850 at 32 mm, 960 at 25 mm, 1100 at 19 mm, 1200 at 16 mm stroke Configuration BRUDERER BBV 202/120 High-Speed Belt Feed Soundproofed Protective Cabin Integrated lighting of the work area Conveyor belt for parts or residual material removal Automatic container changing/stacking system with several collection containers Separate control and operating unit Technical documentation available Description Powerful BRUDERER precision automatic punching machine BSTA 50 for economical high-speed punching of strip material. T ...

Powerful and reliable punching machine for professional metalworking work. Ideal for punching sheets and profiles in steel, aluminum and other metals. • Solid industrial design • High pressing force and precise operation • Suitable for various punching jobs • Well maintained and immediately deployable • Ideal for workshop or production environment Auction-ID: A3-46166-21061

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 20 - 76,1 mm : 3 mm : 2.5 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: Vineyard Type: HW 50 Year of manufacture: 1971 (Delivered Oct. 1971) Press force: 50 t Max. sheet thickness: 1.5 mm Stroke rate: 75 - 200 strokes/min Plunger stroke: 12 - 80 mm Plunger adjustment: 60 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Connected load: 5 kW Configuration Belt feed unit available Straightener with feed rollers Soundproof booth Control cabinet and control system Lubrication system Auction-ID: A1-48536-127

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 811 € : 3/4 26,9 mm, 1 33,7 mm, mm : 3 mm : 2.5 mm : 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4",), 33.7 mm (1",) and 42.4 mm (1 1/4",). The hand-operated machines can be easily wall mounted.With ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 17800 € : 341.76 € : 80 to : 510 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 € : 464.64 € : 80 to : 750 mm : 40x14 mm : 40 1/min : 9 kW : 1700 mm : 1300 mm : 2050 mm : 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.