amada punch used for sale

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

A die-cutting and embossing machine Woschnik + Partner is available. Stroke rate: 9000/h, max. sheet dimensions X/Y: 820mm/1130mm, min. sheet dimensions X/Y: 360mm/400mm, gripper margin adjustment: 10mm-17mm, closing frame dimensions X/Y: 820mm/1134mm, max. die-cutting dimensions X/Y: 800mm/1120mm, cutting rule height: 23.8mm, max. punching force: 4000kN. Machine dimensions X/Y/Z: approx. 8000mm/2650mm/2950mm, weight: approx. 30000kg. Documentation available. An on-site inspection is possible.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

A hydraulic sheet punching machine Indumasch without sheet manipulation axes, but with CNC backgauges for manual sheet positioning, is available. Punching force: 40t, max. sheet thickness: 10mm, stroke rate: 150/min, max. punching diameter: 105mm, working dimensions X/Y: 1000mm/750mm, positioning accuracy: 0.1mm, weight: approx. 3500kg. Without tools. The controls were overhauled in 2014. Documentation available. An on-site inspection is possible.

Reference ID PP-57800 Category Flatbed Die Cutter Manufacturer Bobst Model SP 130-E Year Built 1985 Color - Impression - Working Hours - Speed 7000 sheets/h Max. size 130x92 cm Min. size 58x45 cm Condition Good Location Europe Availability Immediately

Punching cylinder 1964 56 x 77 cm in production available: immediately located: Germany

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

Punching tools / press tool components from MISUMI – i.e. punches and dies / cutting bushes (button dies) for sheet metal working. On the parts you can see designations like SJAS..., EMSD... and on the note several times MISUMI. MISUMI leads SJAS

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price

This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine.

CNC punching machine manufactured in 2001. This Pullmax 6000 features a maximum sheet size of 3000 × 1500 mm and a maximum punching force of 300 kN. It has a tool capacity of 15 positions and a maximum tool diameter of 76.2 mm. If you are looking to get high-quality punching capabilities, consider the Pullmax 6000 machine we have for sale. Contact us for further details.

Reference Num.: 3459 Brand: SIS Paßsystem Type: 50 x 70 cm Available: directly Status: In production Location: Deutschland

High-performance mechanical automatic punching machine with coil system for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine Type: Automatic Punching Machine Year of Make: 1994 Press force: 3150 kN Drive type: mechanical Stroke rate: 20 – 120 1/min Plunger stroke: 20 – 150 mm Plunger adjustment: 150 mm Table surface: 1780 x 1250 mm Plunger area: 1500 x 1000 mm Installation height: 565 mm Tool weight max.: 3000 kg Strip width: 30 – 800 mm Band thickness: 0.5 – 3 mm Max. strap thickness: 4 mm Strip infeed height: 160 – 260 mm Belt speed: 4 – 30 m/min Straightening rollers: 9 pieces Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

Offer 26088 Technical data: - Flat steel shears - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 15 mm - E. Contact stop - various punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details.

A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

An old, however overall only 12 months operated, Friedrich Petig row punching line for copper busbar production (punching) is available. Product: copper bars/busbars/busbars/Cu-bars, control system: Siemens. Documentation available. An on-site inspection is possible.

Manufacturer:Boschert Model: EvoLine 300 Digital Year of Manufacture: 2012 Type of Machine : Manual Punching Machine Technical Specifications - Throat depth: 300 mm - X-travel range: 500 mm - Punching force: 280 kN - Maximum sheet thickness: 6 mm - Quick-change tooling system: TRUMPF compatible Electrical Data - Power supply: 3 x 400 V / 50 Hz - Connected load: 6 kVA - Control voltage: 24 / 230 V - Required fuse: 3 x 16 A Included Accessories - Mechanical stops - Digital readout display Machine Condition The machine was used exclusively in a research and testing environment throughout its life, resulting in very few operating hours. Find more here - / Contact us at -

Punching and nibbling machine - Digital display for X and Y - Tool cabinet with tools Sheet width 750 mm Sheet length: 1250 mm Sheet thickness 4 mm Table area 1600 x 1050 mm Stroke rate 180 stroke/min max. punching diameter 105 mm Punching pressure 25 t Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions L x W x H 1.9 x 1.9 x 1.7 m Auction-ID: A7-46642-66

Manufacturer: FEHRER Model: NL9/S Year of Manufacture: 1991 Specifications: - Stroke: 60mm / max. 1,200 RPM - Needles: 1x 3,000 N/m - Working width: max. 2,600 mm Including: - Control Panel - Control Cabinet Find more here - / Contact us at -

Technical details Type: Ram punch label die cutting machine Manufacturer: PMC Model: F Operation: Mechanical punching system Max pre-cut size: 184 × 184 mm Min pre-cut size: 32 × 32 mm Max die cut size: 178 × 178 mm Min die cut size: 25 × 25 mm Trim: 3 mm Stack height: Up to 102 mm Speed: Approx. 13 cycles/min Power: 3 hp (approx. 2.2 kVA) Electrical: 3-phase supply Equipment: Supplied with multiple cutting dies Application: Label die cutting and small-format punching operations Serial number: F187 Auction-ID: A7-46679-8

Manufacturer: Automatex Model: CBF Year of Manufacture: 2008 Technical Specifications: - Working width: 2.500 mm - RPM: 1200 - Needle Density: 2x 460 N/m - Needles: 5000 N/m - Stroke: 60 mm - Needle boards: 1 set (two boards) Find more here - / Contact us at -

CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details.

Punching machine with trump tool holder, back gauge via adjustment wheel with display Working area: approx. 1000 × 500 mm Max. sheet thickness circa. 6 mm steel control voltage: 220 V-required fuse for the machine is 16 Weight: approx. 2000 Kg Auction-ID: A1-46862-11

Electric drive Foot switch actuation, Various tools are included in the delivery: 1 x top/bottom knife with radius 4 mm 1 x top/bottom knife with radius 6 mm 1 x top/bottom knife with radius 7 mm 1 x top/bottom knife with radius 8 mm 1 x top/bottom knife with radius 9 mm 1 x top/bottom knife with radius 15 mm (currently in use)

Punching force: 350 kN For example, punches a 23 mm hole in 12 mm steel Stroke release via foot switch Support table with stops Range of tools is included in the price

Functions/Processing: Punching & Punching Nibbling Laser cutting (contours, inner contours), forming (e.g. beading, thread forming), countersinking / deburring, combination of several processes in one process This makes it particularly suitable for: thin to medium sheet metal Punching force: 220 kN (22 tons) Laser power: approx. 1.8 – 2.7 kW Working range circa. 3000 × 1500 mm Working range: approx. 3000 × 1600 mm Max. sheet thickness to approx. 6- 8 mm steel maximum. Punching diameter: 76.2 mm travel speed to approx. 108 m/min. - incl. 20 scoffers - incl. air cushion at the front - incl. table extension on the right and left for processing material up to 4.5mtr. Length - without punching tools, these are sold separately as a bundle - Regular maintenance and water change carried out by the service for trump machines - All service documents available A license of the Trumpf Tops  ...

Maximum punching force: 200-250 kN Compressed air termination: 6 bar Control voltage: 24 V Connection cable: 35 kVA Control: Bosch, control cabinet: BochTC Punching diameter maximum .76.2 mm Sheet thickness maximum. 6.4 mm X Working range without resetting: 2500 mm Y Working range maximum. 1300 mm maximum. X-axis speed: approx. 2500 m/min Y speed maximum. 60 m/min Functions: Punching and riveting Working range: approx. 2,500 × 1,1270 mm Operating pressure: 60/170 bar Tool rotation: yes (rotation vercion) Weight: 17500 + control cabinet: 650 kg + cooling unit: 550 kg, - with air cushion 2 pcs. at the front - With various accessories and spare parts - with approx. 20 pcs scassettes - With 2 scrap hand wagons for small parts and scrap without punching tools, these are sold separately as a mixed lot Auction-ID: A1-46862-3

Stored in working condition Auction-ID: A3-43535-17106

cap. Ø27 mm in 7 mm steel or Ø 16 mm in 12 mm steel; Discharge approx. 175 mm Auction-ID: A1-46386-22

stroke adjustable 10 - 32 mm; projection 510 mm; equipped with punching table; Dim. approx. 500x200 mm Auction-ID: A1-46386-6

CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details.

Max Size 108x78, Min. Size 35x30, Pressure 180 Tons, 4.500 sh/hour.

Maximum Sheet Size 1020 × 720mm - Max Speed 7500 sph - Min sheet 350 x 400mm. - Paper weight from 80-2000gsm - Corrugated up to 4mm - 250 Tonnes of Pressure - Non-Stop Manual Feeder with 18mm Infeed Bars - Mechanical Pull - Standard Front Margin - Micrometric Adjustment and Quick Chase in Platen Section - Stripping Section with Upper and Lower Frames and Spare Frames - Non Stop Manual Delivery

Automatic Feeder, Complement of Infeed Table Furniture, OS Pull Side Lay, OOS Push Side Lay, Cube Control System, Electronic Device for Sheet Travel Control, Centre Line, Micro Adjustable 1mm Thin Plate System, Double Action Stripping, Non Stop Delivery, Stripping Pre Make Ready Table, Max Sheet Size : 740 x 1060 mm, Min Sheet Size : 350 x 400 mm, Max Speed : 7700 Sph, Max Impression Strength : 260 Tons

Manual Sheet Feeding (Hand-Fed), Mechanical Clutch-Brake Drive System, Micrometric Cutting Pressure Adjustment, Universal Self-Centering Chase, and Heavy-Duty Cast Iron Construction for Stable and Precise Die-Cutting Performance.

Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t

Manufacturer: Geka (Maquinaria Geka S.A., Spain) Model: HYD 110 CNC controller: Inter Imex PT 500 Year of manufacture: 1997 Serial number: 16306 Machine type: Hydraulic punching and shearing machine (steelworker) Max. punching force: 110 t Throat depth: 250 mm Strokes per minute (20 mm stroke): 37 /min Punching capacity (hole Ø x thickness): 40 x 10 mm Notching capacity: 10 mm Flat steel capacity: 300 x 15 mm or 200 x 20 mm Angle steel capacity 90°: 120 x 120 x 10 mm Angle steel capacity 45°: 70 x 70 x 7 mm Round bar capacity: Ø 40 mm Square bar capacity: 40 mm Operation modes: Manual / Automatic Functions: Punching, flat bar shearing, angle shearing, notching, bar cutting Emergency stop: Yes Condition: Used, industrial condition, signs of wear consistent with age Remarks: Hydraulic ironworker with CNC positioning control via Inter Imex PT  ...

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price

max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-47249-324

Kit consisting of 8 pin punches, 2 awls and 4 mason's chisels Overall dimensions: 400 x 200 x 100 mm Weight: 5 kg Auction-ID: A7-47248-324

Batch that is part of a combination of batches Auction-ID: A1-47254-41