133,801 used machines on RESALE, but how to find them? Machine Search
Pressure tank with two dished heads, central outlet and manhole., Additional title: Vertical stainless steel tank, Volume: 7366 l, Working pressure: 3 bar, Width: 1850 mm, Height: 3300 mm, Weight: 400 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, manhole, cleaning line, CIP spray head, 2-hole RLV, bunging device, pressure gauge, sampling tap, level indicator, discharge line with hand valve
Pressure tank with two dished heads, central bottom outlet and two further lateral connections at different heights and manhole., Additional title: Vertical stainless steel tank, Volume: 10017 l, Working pressure: 3 bar, Test pressure: 4 bar, Length: 1,9 m, Width: 1,9 m, Height: 4,1 m, Weight: 850 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central lower outlet as well as additional side connection, manhole
Pressure tank with conical head and central outlet, additional tangentially mounted inlet/outle and manhole, upper dished head., Additional title: cylindroconical tank, Volume: 10000 l, Working pressure: 3 bar, Width: 2,3 m, Height: 4,3 m, Weight: 1000 kg, Material: stainless steel, Position: vertical, Base construction: on feet, Features: central outlet, additional tangential inlet/outlet, manhole
Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water., Additional title: coolable stainless steel pressure tanks, Volume per tank: 32400 l, Cooling surface/tank: 25 m², Perm. working overpressure: 3 bar, Systemic volume: 324 hl, Length: 2,5 m, Width: 2,5 m, Height: 7,4 m, Weight: 2585 kg, Material: stainless steel AISI 304, Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve , Periphery: Inlet and outlet pipework via double-seat valves
Stainless steel brewing vessel as a wort kettle and whirlpool combination with an external boiler., Additional title: brew vessel from stainless steel, Total volume: 260 hl, Diameter approx.: 3 m , Diameter incl. insulation approx.: 3 m, Frame height: approx.: 2 m, Width: 3,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: on stainless steel pipe supports, ground pegged, Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting
Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping
This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 17800 l, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Material: stainless steel, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equ ...
Insulated and clad stainless steel pressure tank with various fittings., Additional title: insulated tank, Capacity: 12800 l, Pressure: 4 bar, Temperature: 20 °C, Length: 5,1 m, Width: 2,1 m, Weight: 2000 kg, Material: stainless steel, Position: hozizontal, Features: insulated and cladded, outlet DN65, manhole, 2 spray heads
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking 2-year warranty Pressure 60 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 820 x 300 mm Installation height 900 mm Capacity per litre 6.0 l Speed from 5.4 mm/sec Speed to 8.3 mm/sec Motor power 3.0 kW Machine weight approx. 0.725 t Space requirements approx. 1.46 x 0.85 x 2.4 m Auction-ID: A7-46642-60
Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve
Dimension of press: 1400x1400x1600mm, Workshop screw press, incl. assortment of tools; for more details see photos of Regal Auction-ID: A7-46619-324
A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.
Pneumatic Press Pressure max. 7.5t Table 250 x 200mm Projection 100mm incl. tools and foot pedal see pictures Auction-ID: A7-46642-219
Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 8.0 kN Stroke 40 mm Projection 90 mm Working height from up to 50 - 200 mm Table surface 120 x 160 mm Machine weight approx. 22 kg Dimensions L x W x H 160 x 230 x 410 mm Condition: never used / new (5) Auction-ID: A7-46642-187
Jaw width approx. 125mm, Clamping forces: 0=direct, 1=10kN, 2=20kN, 3= 30kN, 4= 40kN Auction-ID: A7-46619-283
Rebuilt in 1993, Press force: 200 t, Table size : 1250 x 1000 mm, large removal of clamping surface to ram: 900 mm, Plunger stroke: 500 mm, Kickback force: 29000 kg, Hold-down device large stroke: 250 mm, Ejector: 250 mm away, Power requirement: 25 kw, Speed: 960 rpm, Minimum installation height: 400 mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-220
Toggle hand presses HK 1700 stroke 60 mm with crank with working height fine adjustment Height of the stand 450 mm Without additional effort, even more pressure in production. Maximum pressure output shortly before the end of the stroke thanks to toggle technology. Particularly stable design of spindle head and stand Pressure 17.0 kN Stroke 60 mm Projection 105 mm Working height from up to 75 -180 mm Table surface 170 x 130 mm Spindle diameter 25 mm Machine weight approx. 35 kg Dimensions L x W x H 260 x 130 x415 mm Condition: never used / new (5) Auction-ID: A7-46642-154
Rebuilt in 1992 by Beck & Röhm, Printing capacity: 630t, Clamping surface: 1730x2500 mm, Number of grooves. 8, Plunger stroke: 900 mm , Installation height: 1550 mm, Power requirement: 2 x 7.5 kW, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-210
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 30 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 720 x 295 mm Installation height 900 mm Capacity per litre 6.0 l Speed from 7.5 mm/sec Speed to 12.5 mm/sec Motor power 3.0 kW Machine weight approx. 0.6 t Space requirement approx. 1.35 x 0.85 x 2.2 m Condition: never used / new (5) Auction-ID: A7-46642-93
Technical data Machine Type: Press Manufacturer: TOX PRESSOTECHNIK GmbH & Co. KG Press Type: MAG 030.226.A.001 Serial Number: 315604 Drive: TOX Powerhouse S 30.113.140.12D-LF Pneumatic connection: G 3/4\" Electrical connection: 230 VAC Maximum pressing force: 170 kN (6 bar), 300 kN (10 bar) Minimum air pressure: 3 bar Maximum air pressure: 10 bar Stroke: 140 mm (total), 12 mm (power stroke) Ambient temperature: 10°C to 60°C Weight: approx. 1150 kg Year of Make: 2007 Configuration Control: STE 325-130-3/4 Compressed air: filtered and dried (max. 40 μm) Note: Powerhouse should be renewed Auction-ID: A1-46503-324
Pneumatic Press Pressure max. 7.5t Table 250 x 200mm Projection 100mm incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-46642-183
4x 65T4H (used) 17x 65MB64H (orig. packaging) Auction-ID: A1-46686-47
Machine No: ZE 400.16.1.11.U, rebuilt in 1993, Press force: 400t, Table size: 1600x1300 mm, Run-up time 90 ms. The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-230
range of robust presses/tool pads; see photos for more details Auction-ID: A7-46619-211
Pneumatic Press incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-46642-120
Base length 570 mm/ including pallet box Auction-ID: A1-46698-93
Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details Auction-ID: A7-46619-322
assortment of various presses/tool pads in different lengths and sizes (also contents from the shelf); see photos for more details Auction-ID: A7-46619-212
Pneumatic Press incl. tools and foot pedal see pictures Condition: unchecked (6) Auction-ID: A7-46642-208
This frame press is CE certified according to the latest guidelines - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 10 t Stroke 180 mm Clear width between uprights 335 x 115 mm Installation height max. 340 mm Cylinder diameter 56 mm Piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A7-46642-125
Single-column press - With table base - Various press accessories Pressure 2 t Projection 150 mm Stroke 150 mm Table surface 310 x 250 mm Drive power 2.0 kW Machine weight approx. 0.6 t Dimensions approx. 1.2 x 0.8 x 1.7 m Condition: unchecked (6) Auction-ID: A7-46642-44
Frame press, CE certified according to the latest guidelines. - With manual hydraulics - Move cylinder sideways - 2 pcs press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 Press pads Pressure 20 t Stroke 180 mm Clear width between uprights 540 x 100 mm Installation height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-46642-166
Type: SE201/125.1.2, Printing capacity: approx. 200t, Table surface approx. 1600x1300 mm, Stroke max. approx. 600mm, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed. Auction-ID: A7-46619-240
Manufacturer: TOX Pressotechnik Type: KFLU 025.004 Description: Toggle Press Serial number: 439457.36 Year of Make: 2013 Max. pressing force: 16 / 25 kN (approx. 1.6–2.5 t) Total Stroke: 60.0 / 25.3 mm Weight: approx. 86 kg Auction-ID: A1-46686-80
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 100 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1010 x 300 mm Motor power 4.0 kW Capacity per litre 11.0 l Installation height 900 mm Table surface 1010 x 560 mm Speed from 4.8 mm/sec Speed to 7.5 mm/sec Machine weight approx. 0.9 t Dimensions L x W x H 1550 x 900 x 245 mm Auction-ID: A7-46642-145
Includes: transport box 1230x810x1030mm, various accessories. Auction-ID: A1-45979-68
Dimension on clamping table: 1000x140 Condition: possibly defective Auction-ID: A7-46619-356
Pressure output max. 15,000 PSI incl. weight set and spare seals lots of accessories Type: Hydraulic Hand Pump / Comparator Pump Pressure range: 0 to 1,000 bar (15,000 psi) Medium: Water or Oil Auction-ID: A1-46686-6
Max. clamping force: 40kN, Jaw width approx. 125mm ; see photos for more details Auction-ID: A7-46619-284
Operating pressure max. 1890 bar, ratio 1:440 Weight incl. packaging approx. 350kg Original price approx. 50.000€ Auction-ID: A1-46686-11
CW light detection and Siemens Simatic HMI Control. Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46452-1
High-quality, hydraulic press can be used both manually and motorically. . Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking Pressure 160 t Stroke 400 mm Passage between the uprights longitudinally/sideways. 1100 /350 mm Installation height 900 mm Capacity per litre 15 l Speed from 6.2 mm/sec Speed to 9.8 mm/sec Motor power 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.0 x 2.55 m Auction-ID: A7-46642-52
Toggle Press • Working height adjustable by simply loosening the clamping screws on the stand • Fine working height adjustment with HK 800 = millimetre-precise adjustment of the press head to the desired working height. The fine adjustment is done forcibly in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring Pressure 500 kN Stroke 40 mm Projection 73 mm Working height from up to 60 - 150 mm Table surface 115 x 70 mm Machine weight approx. 10 kg Condition: never used / new (5) Auction-ID: A7-46642-136
general refurbished, very good condition with preevacuation filling valves: 16 working direction: right-left (CCW)
filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale H?henverstellung 1,80 Breit, 1,80 Tief, 2,50 H?he
left - right filling valves: 24 working direction: left-right Format Parts Bottle Size: 73mm,87mm,103mm,109mm
Machine number: 6750296 max. load: 450 kN Throat: 230 mm Plunger strokes: 80 1/min Plunger adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 kW Voltage: 380 V Table dimensions: 700 x 520 mm Auction-ID: A7-46287-30
in working conditions , tested Pump Pressure (bar/MPa)190/19 Cleaning impact (kg/force)5 Pump (RPM)1450 Power consumption (kW)6.0 Voltage/phase/frequency/current (V/~/Hz/A)230-400/3/50/22.3-12.2 Water flow Qmax/Qiec (l/h)960/900 Water temperature (water/steam) (°C)90/150 El cable (m)5 Fuel consumption at ?T=45°C (kg/h)4 Fuel tank (l)15 Nozzle size.0500 Max. inlet temperature (°C)40 Ceramic pistons3 Dimensions, L x W x H (mm)1053x685x760 Weight (kg)136 There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear m ...
maximum number of results exceeded
please refine your search
2.700 € 
