amada press brake used for sale

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 423 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Manufacturer: HSM Model: HSM V-Press 1160 eco Type of machine: Cabinet Press Year of manufacture: 2011 Pressing force: 532 kN Voltage: 3 phase, 400 V, 50 Hz Motor: 7.5 kW Rated current: 15.5 amps Find more here - .ucymachines/ Contact us at - sales@ucymachines

For sale is a TOX Pressotechnik press of type MBG 004.124. The machine has a pressing force of 40 kN, equivalent to about 4 tons, and is suitable for industrial press-fitting, joining, assembly, riveting, embossing and caulking work. Particularly noteworthy is the existing examination: The machine is still tested until 04/2027. Technical data Manufacturer: TOX Pressotechnik Type: MBG 004.124 Product Type: Press/Press-Fit Machine/Joining Machine Press force: 40 kN Maximum air pressure: 5 bar Total stroke: 200 mm Power stroke: 80 mm Year of Make: 2001 Machine serial number: 210192.1 Machine number / electrics: 210193.1 Nominal voltage: 230 V AC Control voltage: 24 V DC Frequency: 50 Hz Power: 0.2 kW Rated current: 0.5 A Fuse: 16 A Degree of protection: IP65 Standard: DIN EN 60204 Circuit diagram: STE 325-26 Country of manufacture: Germany Exam valid until: 04 ...

Steel PS 46.2 Pressing Delivery Age: 1993

A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Used Used Engel Pet preform presses: Year: 2004 Condition: As Is Model: MacPET 4550-320 maszyna nr 52890 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 111 More details: https://bottlingscout.com

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine.

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

Mechanical stamping press manufactured in 1984. This KAISER V50W High-Speed Press underwent a complete mechanical and electrical overhaul in 2022, featuring a new Siemens control system and a SEW 59 kW main motor. It offers a pressing force of 500 kN and a stamping speed of up to 400 strokes/min. If you are looking to get high-quality stamping capabilities, consider the KAISER V50W High-Speed Press we have for sale. Contact us for further details.

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details.

Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details.

Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details.

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

Key data: 30 t

Hydraulic press can be used in a variety of ways as an assembly press, small series press, manual insert press or heating press in double-column presses Design (H-press) A tour of the press is possible at the Ennepetal camp. It is a 2.5-year-old, unused press with no operating hours, which is sold with a full warranty. List price: 45,000 Technical details: Robust machine frame Capacity: 30 tons – at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW – 15 hp Oil tank: 600 × 450 × 500 mm – with approx. 100 litres Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Fast forward: 45 mm/s Return: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm – with T-slots Plunger plate: 700 × 500 mm – with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Press table size 700 × 500 × 7 ...

Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons A 2004 Schnupp Hydraulic Press with a capacity of 2,500 tons is a robust machine designed for heavy-duty metal forming applications. Technical details in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Automatic Press: - Model: MARK/C 20-32.5. - Platens Dimensions: 2000 × 3250 mm. - Daylight Opening: 140 mm. - Thrust: ...

baler hydraulic power pump HSM V-press 1160 Plus

Industrial continuous press, including the discharge table. The machine will be in full use until December 20, 2024. From December 21, 2024, the system can and must be dismantled. The glue application machine and the table in front of the press remain and are not for sale. The facility is still fully operational and can be visited at any time. System data: Press brand: Friz Pass Press 1973. Pressplatte: 5300 x 2250 mm Opening: 125mm Heating: hot water / steam Pressing temperatures: Cold approx. 30° to Max temperature 130° (adjustable) Cylinders: 3 rows of 5 cylinders each Diameter of cylinder: 160mm Pressure: 160 Baar (Adjustable) Glue: White glue D4 or modified with hardener. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed ​​of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Condition of new machine. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: METSO LINDEMANN Type of Machine : Press Shear Year of Manufacture: 2010 Technical Condition: Good After major renovation in 2023 Meter reading: 18,500 Mt/h Technical Data - Power Supply: Electric 3 x 90KV - Cutting Force: 630 tons - Scrap Compression Force: 630 tons - Number of Pumps: 3 pcs - Capacity: Approx. 8-22 tons/h - Loading Scrap: Left or Right Side - Loading Box: 12m³ - Total Weight (Machine + Container): 75 tons - Control: Remote Control - Hydraulic Oil Capacity: 6,500 liters Find more here - .ucymachines/ Contact us at - sales@ucymachines

pressure: - t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Presstek Model: 34DI Year of Manufacture: 2006 Type of Machine : Digital Offset Printing Press Total length: 320 cm Max. print format: 450 mm Max. sheet size: 460 mm Production speed: 7,000 sheets/hour Total impressions: approx. 4.2 million Installation area: 350 × 300 cm Includes inks and maintenance materials Complete maintenance performed in 07/2022, including full disassembly, cleaning, and reassembly Consumables (printing plates, Printon, ink, printing blankets, etc.) included. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Durma Type: Hydraulic Press Brake Model: 3m x 120 Ton Year of Manufacture: 2004 Control: NC Capacity: 120 tons Bending length: 3000 mm (3 meters) The machine also has new upper and lower tools (euroram) Find more here - .ucymachines/ Contact us at - sales@ucymachines

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

Specifications Maximum pressure: 5.7 tons Pressing force: 1.18 kg/cm Bale size: 600x800 mm Bale weight: approx. 70 kg Power connection: 400V / 1.5 kW Year of Make: 2009 Productivity: approx. 3 bales/hour

Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total Stroke: 100 mm Power Stroke: 11 mm Machine Weight (without tool): 3420 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

40 TON PRESS MACHINE

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine.

This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information.

Press modul for production of CLT panels. Used for test production of different CLT and hybrid panels.

General SKU226P207 LocationBarneveld MakeBUCHER-GUYER SA (CH) TypeKHL 50 No.70903 Pressure Working pressure500 Bar Main Features Size length500 mm Sizes width500 mm Stroke290 mm Specified Features - Laboratory press Laboratory presscheck Stroke+/- 290mm Upper plate dimensions500x500mm Dimensions lower plate500x500mm Number of platens2 Column presscheck Number of columns:4 Column diameter60mm Electric heated platens(2x)1720watt Platens can be cooledcheck With hydraulic unitcheck Motor2,2 KW, 220/380 Volt Electric capacity18 KW General Year of construction1979 With switchgear(as is) Floorspace2,3x1,4 M Total height2,7 M Weight2600 KG Extra Specificationspressplate size: 500x500 mmpress force: 50 Mppress force at 200°C: 5 kp/mm²press force at 250°C: 2,5 k/mm²indicated size is platen size Technical specs Extra informationindicated size is platen sizeLab ...

Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 180 mm under hold-down Max. Punch Height: 145 mm Wither height: 150 mm Weight: approx. 400 kg

Hydropneumatic mode of operation Profile height: 210 mm under hold-down Max. punching height with 2-way adjustable punching heads: 145 mm Wither height: 150 mm Weight: approx. 400 kg

PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 950 mm   table surface (front-back): 660 mm   thickness of bolster plate: 68 mm SLIDE   table surface (left-right): 540 mm   table surface (front-back): 450 mm   spigot hole diameter: 60 mm   stroke: 130 mm   stroke rate (max.): 65 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 370 mm DIMENSIONS / WEIGHTS   total weight approx.: 7000 kg Located in Barcelona - Spain 2 identical units available

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

Key data: 15 t

C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm and a stroke of 250 mm, making it suitable for press-fit work, assembly processes and small series production in industrial use. Technical data + information: General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Total height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guide: 2-fold Hydraulic cylinders - Stroke: 0–250 mm - Working pressure: 250 bar - Start-up speed: 17 mm/s  ...

General SKU209W119 MakeHaagen &: Rinau LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN400 Top connectionscheck OutletDN40 Max. temperature143°C MaterialStainless steel 1.4435 (316L) General No.301015/4 Year of construction1998 Mounted on consolesOn wheels Floorspace0,95x1,15 m Total height2,0 m Weight360 kg Extra information with spray ball. inspection window in mannhole. Pressure vesselsFine chemicalsBiotechnologyAgrochemicalsPlastic & polymersSolventsDetergent & surf.Cosmeti ...

Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included

BLS Lamination Press has been rebuilt to meet your lamination needs. Specifications: Tonnage: 20 Ton Max Temperature: 150°C Electric Heated Platen Table Size: 600 mm x 600 mm Daylight: 425 mm Open/Closing Speed: 10 mm/s Omron PLC HPU

Drive: TOX power package S 04.00.300.44D, pneumatic connection: G 3/8 inch, compressed air preparation: filtered and dried compressed air, max. particle size: 40µm, control: STE 336-306-1/2, max. press force at 10bar air pressure: 40kN, air pressure: 3 to 10bar, total stroke: 300mm, force stroke: 40mm, ambient temperature: 10 to 60°C, length: 1753mm, width: 1100mm, weight of the yoke: approx. 1290kg, with documentation. The machine has been shut down for years, but is in good condition, an inspection on site is possible.

This Hüttenhölscher Body Press was manufactured in 2000. Ideal for efficient carcase pressing applications, it represents a reliable choice for your production needs. Contact us for more information.

Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.