129,473 used machines on RESALE, but how to find them? Machine Search
NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit
Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm
length: 2000 mm width: 1000 mm height over floor: 1000 mm total power requirement: 0 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 31,51,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible.
Key data: 900 mm, 500 mm, 500 mm
Offered here is a machining center from the manufacturer Emco Famup with 4th axis with tailstock. The machine is freely loaded onto trucks. Make: Emco Famup Type: EmcoMill E900 Year of Make: 2008 Control: Siemens Sinumerik 810D - ShopMill Specifications: Travel distances X-Y-Z: 900x500x500 mm Rapid traverse X-Y-Z: 24 m/min A-axis travel range: 3600.001° Fpjc Ha Isxrvrdoh U Hop Table clamping surface: 1000x520 mm Max. workpiece weight: 800 kg Minimum distance between vertical spindle and table: 100 mm Maximum distance between vertical spindle and table: 600 mm Tool magazine: 30 positions Tool holder: ISO 40 DIN69871 Spindle speed: max. 12000 rpm Spindle power: 13 kW Coolant supply through the spindle: 15 bar (IKZ - CTS) Total weight: approx. 5 tons Dimensions: approx. 4000x2400x2900 mm
General SKU354T1373 MakeSchroder Kombinator LocationBarneveld CEcheck TypeVEMK 01/108-350 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information No.11/4053-1-182757 Year of construction2002 Floorspace1,7x0,65m Total height1,7m Weight380kg Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...
General SKU200T008 Makeullmann &: Co Gmbh No.5225-A1 Year of construction2001 Mounted on legscheck Main Features MaterialStainless steel Volume3000 Ltr. Motor7.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity3000Ltr. Vessel sizesDia 1800x1800mm Conical bottomcheck Flat top sidecheck ManholeDia:500mm Top connectionsDN100(3x), DN 50(2x) OutletDN80 Max. temperature90°C With propellor stirrercheck Motor1,5kW, 230/400Volt, 1410rpm Speed mixing shaft334rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General LocationBarneveld Floorspace2,10x1,8m Total height2,9m Weight600kgStirring vesselsUllmann & Co.Stirring vessels > Stirring vesselsBrand > Ullmann & Co. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...
General SKU315T1101 LocationBarneveld CEcheck MakeAzo TypeDFS 100x1380 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel With jacketcheck General No.825989, Year of construction2005 Floorspace2,7x1,4 m Total height2,3 m ATEX designedcheck Extra SpecificationsIBC lock, type EB12:with:screw conveyor, type DFS 100x1380 NE300, size: dia. 100 mm, lenght 1380 mm, Vibration motor,Stainless steel vessel, type D1104XD305 on frame, volume 600 LtrMiscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...
General SKU315T1103 LocationBarneveld CEcheck MakeAzo TypeG21-text Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport Capacity2x IBC With jacketcheck Miscellaneous transport MaterialStainless steel General No.045256B Year of construction2005 Mounted in framecheck Mounted on legscheck Floor space4,10x1,40 m Total height2,71 m ATEX designedcheck Extra Specificationsscrew conveyor.type DFS 100x1380 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm0,75 kW, 230/400 Volt, (Ex)Vibration motor.0.4 kW, 400 Volt, (Ex)stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mmground surface: 1.7x1.6 mheight: 1.6 mMiscellaneous transportAZOConveying systems > Miscellaneous transportBrand > AZO What you can expect from Foeth: -- Mac ...
General SKU300X420 MakeEmo LocationBarneveld CEcheck TypeFPAC 800 Dimensions Cake capacity630 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface46 m2 Specified Features - Filterpress Filter presscheck Filter surface46 m² Number of platens45 and 2 end plates Internal platen sizes730x730 mm External platen sizes800x800 mm Platen thickness60 mm Cake capacity630 l. Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information No.EMO 1467 47-57-30-16 Year of construction2007 Floorspace6,0x1,75 m Total height3,0 m Weight6000 kg Extra Specificationsthis machine is equipped with plate cleaner. with :recessed plates. FilterpressesEMOFilters > FilterpressesBrand > EMO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...
EMCI, Explo 750T, Weight: 3800 kg, Dimensions: 450 x 150 x 235 cm, Drive: 75 HP diesel engine, Drill motor:, -Rotation speed 260 RPM, -Power: 3200 Nm, Pull-up/pull-down: 2500 kg-2500 kg, Comes with 32 x 3-meter drill pipes (96 meters), 1 x 250 mm drill bit, 1 x 300 mm drill bit, 1 x 200 mm drill bit, 1 x 150 mm drill bit, 1 x 400 mm auger drill bit., , = More information =, , Type of fuel: Diesel, Year of manufacture: Jun 2008, Model year: 2008, Power: 55 kW (75 HP), GVW: 3.800 kg, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, dri ...
The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg
Technical data Film width: 1350 mm Unwinder: Shaftless, servo-driven, Ø1000 mm Rewinder diameter: Ø610 mm Speed: up to 400 m/min Slitting system: Rotary & razor blades Additional features: Banana roller, trim exhauster
control: 840D-PCU 50 V1 : 3 coolant: ja chip conveyor: ja kW generator - rated current: 110 A connected load: 56 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.
A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...
incl. 20 m roller conveyor, brand Laeisz & Lüders, with new S7 control unit (Teyfel) from the year 2015, Process for Big Bag filling:, - You program the desired setpoint on the big-bag scale., - On the roller conveyor 3.1 empty pallets are placed on and moved over the button, Palette” acknowledged on an external control unit., - The empty pallet is driven onto the scale of the roller conveyor 3.2 and the BigBag scale is tared to zero, - An empty big bag must be hooked into the load hooks and the, Fill nozzle pulled over the puff hose on the fill pipe (external switch S6), Expansion hose., - The Start Big-Bag button starts the filling:, · The filling head moves to the top position, · The filling flap opens and the dosing chute feeds in the coarse/fine flow the, Target quantity in the big bag, · After reaching the fill level, the fill flap closes., · Open the load hooks and deflate ...
Manufacturer: Engel Model: Emotion 440/160 Year of Manufacture: 2018 Max. installation height :460 mm • Center support package • Max. closing force :1600 kN Cylinder size: 40 mm • Screw CRN coated • OptiShut backflow preventer • max. spray pressure 1940 bar • Injection volume 55-220 cc Max. injection weight :174 g Operating hours: 33526 h Equipment: • 1 core pull incl. auxiliary unit • Plasticizing cylinder set, highly wear-resistant design • Needle valve nozzle • E-Flomo • IQ weight control • IQ Clamp control • EM 63 interface • separate water and electricity connections Find more here - / Contact us at -
A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.
Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.
Key data: 340 mm, 2000 mm
Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
-Kettle vat for Kemper ECO125AE spiral mixer -Shell diameter approx. 92cm -Kettle interior height: 52.5cm
With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm workpiece weight: max. 250 kg x-axis: 380 mm z-axis: 1150 mm sanding disc diameter: 400 mm peripheral speed: 20-50 m/sec workpiece spindle stepless: 1 - 650 U/min tailstock quill taper MT: 4 quill stroke: 45 mm dia. of quill: 50 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used Spiral mixer Kemper SP 100 L with stainless steel boiler and stainless steel tool in good condition immediately available for sale. The machine is mobile on rollers with brake and with replica flour rod cover including safety switches. -Manufacturer: Emil Kemper GmbH - Type: SP100L -Stainless steel boiler -Stainless steel spiral -2 x Automatic timers -2 x speeds slow and fast -with flour dust cover -for 100 kg flour or 160 kg dough -more pictures and information on request -Shipping and trade-in on request -Machine can be inspected and tested in our warehouse
Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction
Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul
For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 10,500 mm Y-axis travel: 1100 mm Travel Z-axis: 655 mm B-axis swivel angle: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Barcode scanners and label printers Metal chip conveyor Angle head for machining from below Suction for cabin Pendulum operation through two light barrier areas Manual control panel Spindle hours: approx. 7500 Loading is included in the price, machine is already dismantled Weight: approx. 14,000 kg
turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU316W644 MakeEMDE LocationBarneveld CEcheck TypeEntleer-u. Forderanlage/ FSH 315 X 315 X 120/ BE 1500 Main Features MaterialStainless steel Motor0.62 KW Specified Features - Miscellaneous transport Capacity127 l (Hopper) With jacketcheck Miscellaneous transport MaterialStainless steel 1.4306 (304L) General No.A111.0990/ A111.0990-1.1 Year of construction2011 Mounted in framecheck With switchgearcheck Floorspace1.7 x 2.8 m Total height2.21 m Weight550 kg ATEX designedcheck Extra SpecificationsFibro feeder length: 2 metersThickness of the feeder: 12 cmWidth of the feeder: 38 cmMiscellaneous transportEmde NassauConveying systems > Miscellaneous transportBrand > Emde Nassau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...
This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us.
A stationary Putzmeister concrete pump in trailer design is available. Motor power: 7.5kW, max. delivery pressure: 40bar, delivery capacity range: 30l-90l/min, max. aggregate size: 8mm, piston stroke: 130mm, piston diameter: 100mm, mixing hopper volume: 170l, feed hopper volume: 200l, filling height: 1300mm. Machine dimensions X/Y/Z: approx. 3650mm/1600mm/1600mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
Qty. 1 Second-hand V-cut saw line with PE film packaging line with PE extrusion Mfc.: Emmegi, Moretto Type: Saw: V-Cut - EST D46 Built: 2004 Min./Max profile length: 1500 – 7000 mm Consisting of: Saw line PE extruder Film packaging line with feeding device and stacker Connected power: 25 kW, 400 V, 50 Hz Control voltage: 24 V
This 7-axis EMCO HYPERTURN 665 MC PLUS lathe was manufactured in 2005. It features twin spindles, twin turrets, and a maximum turning diameter of 600 mm. Equipped with a SIEMENS 840D CNC, it offers spindle speeds up to 5000 rpm and a bar passage diameter of 65 mm. Additional features include a LNS MOVE bar loading magazine, high-pressure coolant system, and air-conditioned control cabinet. For more information about this lathe, please reach out to us.
An agitator, presumably from the manufacturer Stelzer, with an Emod motor is available. Agitator shaft: 70mm, operating tank volume: 200m³, operating medium: milk, motor power: 12.5kW, speed: 980rpm, power factor: 0.70. An on-site inspection is possible.
This EMAG VTC 250 Twin was manufactured in 2015. A robust vertical turning machine featuring a MINERALIT base, it handles workpieces up to 140 mm in diameter and 630 mm in length, weighing up to 20 kg. Integrated with an EMAG pick-up system and dual turrets, each with 11 tool stations. Maximum spindle speed reaches 5000 rpm, driven by a 29 kW power unit. Contact us for more information about this machine.
This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.
This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.
This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine.
This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.
This 3-axis NCT EmR-610M vertical machining center was manufactured in 2017. It features a 600mm X-axis, 400mm Y-axis, and 450mm Z-axis, with a high-speed capability of 30000 RPM and a HSK-E40 clamp. It also includes 21 tool slots. If you are looking to get high-quality milling capabilities, consider the NCT EmR-610M machine we have for sale. Contact us for more information.
EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...
Polishing machine Emme Elle Surface polishing machine Type: LBA 1300 automatic Year of Make: 1995 Working width 1300 mm Height of the workpiece to be polished maximum 100 mm Vacuum table with 2 working levels Table length 6 meters each with vacuum clamping While polishing is done on one level, the second can be used, or the workpieces are accepted and replaced. 4 rotating and oscillating polishing rollers are used. Includes 4 new polishing rollers! Rotation adjustable from 5-25 rpm. Feed speed adjustable from 2 – 5 m/min. After the polishing process has been completed, the rollers lift off the workpiece and four rotating plates equipped with special foam polish the surface. The rotation and direction of rotation as well as the polishing time of the rollers and polish plates can be different. Connected load 26 kW 4 polishing units length 500 mm Polishing roller ...
This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine.
Vertical machining center Emco FAMUP MCX 750-1200 with IKZ 40bar Year of Make: 2007 Control: Fanuc 21i Running hours: 8,500h Chip Blaster High Pressure System - Max. speed 8,000 min. • Tool magazine with 24 magazine slots (ISO 40), • Tool holder ISO 40 - 24 Tightening bolts ISO 40 • Standard paintwork: Red – Grey – Black • Spindle is prepared for high-pressure cooling (port A) • Threading without compensating chuck • Central lubrication system • Chip removal from the housing via a wash-down device • Rinsing gun for cleaning work area, clamping devices, parts • Coolant device with 3 adjustable nozzles • Coolant tray 500 l • Spindle blow-out device for cleaning the holder during tool change • Lighting of the work area by halogen lamp 24 V • Two-color alarm lamp TECHNICAL DATA MCX 750 Axis X - longitudinal: 750 mm Axis Y ...
This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with 18kW and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us.
maximum number of results exceeded
please refine your search
