amada em used for sale

This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.

General SKUR0453 MakeAZO gmbH & Co KG LocationBarneveld TypeAZO Emptying system AZO Batchtainer 700x1005 Main Features MaterialMild steel Number of1 heads Specified Features - Powder filler Powder fillerEmptying system MaterialMild steel Information No.1269665 Year of construction2015 Floorspace1,3x0,9 M Total height0,7 M Extra SpecificationsThis pick-up station is used for discharging product from a container of type AZO Batchtainer This machine is equipped with 2 JVM vibration motors 0.4 kW 380/420 Volt For opening the Batchtainer, a pneumatically driven rotary mechanism is mounted Powder fillersAZOPackaging machines > Powder fillersBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.

New Woodward EM35MR1 actuators. Ser.nr. 13327615. Made in USA.

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested

In this case, the containers to be labelled are fed in by hand. The system was used for cylindrical jars with a low height. They are first given a base label from below, turned by 180° using a turning basket, and then given a security seal label from above. The labelled jars then run onto a storage table, offset by 90°.

Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.

The Karl Schnell Type 046 KS FV-SERIES Emulisifer is designed for the fine art of fine emulsion; premincing, vacuumizing, mixing and emulifying all in one machine. Designed for the production of small batches, this machine of the FV-Serie complete thus the versatile KS offer which result in a constant quality level of the final product, creating of stable and homogeneous emulsions, flexibile applications and high productivity. This machine is previously used in a processed cheese plant in Europe. Hopper inside diameter 550 mm and inside height 400 mm. Volume of the hopper: ± 30 liter. The hopper has a direct steam injection nozzle, double jacketed and can handle vacuum. Motor: 4,1 / 8,2 / 14 kW - 120 / 230 / 400 V - 32 / 31 / 31 A - 710 / 1.440 / 2.550 rpm - 26 / 50 / 87 Hz. Simple control panel with buttons., Type of Machine: Emulsifier, Volume hopper: ± 30 liter, Motor: 4,1 / 8,2 / 1 ...

control: Fanuc 31/32 i : 2 chucking diameter: 170 mm swing diameter: 210 mm x-travel: 400 mm z-travel: 200 mm length: 2500 mm width: 1900 mm height: 2300 mm weight: 5500 kg turning height: mm turning diameter: mm swing diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU215X088 MakeVMI LocationBarneveld CEcheck TypeMB1200 Main Features MaterialStainless steel Motor7.5 KW Length950 mm Specified Features - Stirrer MaterialStainless steel 1.4306 (304L) Turbo stirrercheck Shaft length950 mm Sizes stirring headø 200 mm Motor7,5 kW, 400 V, (Ex) With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck Information No.156125 Mach.No.156125 Year of construction2009 Mounted on framecheck With switchcheck Floorspace1,61 x 1,90 m Total height2,90 m ATEX compatiblecheck Extra Specificationswith E&:H flow meter (as is)StirrersVMI EmulsionerMixers > StirrersBrand > VMI Emulsioner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...

diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA

diameter range 110 mm max. outside dia. of round pieces 110 mm kind of heating 335 KW

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

- Universal milling machine with toolmaker precision  - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake  -  

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -

Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -

EMMES pneumatic block gluing press Maximum gluing length 4000 mm Number of vertical clamps 8 Number of frontal clamps 4 Net price

Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg

Block gluing press EMMES EPP 200 pneumatic Maximum gluing length 2000 mm Number of vertical clamps 6 Number of frontal clamps 3 Net price

Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.

Three-phase motor, electric motor -Transfer in current condition as seen -Foot is broken in one place -Power: 3.5/14 kW -Speed: 730/1470 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 620/390/H310 mm -Weight: 130 kg

Rotary drive, actuator, actuators, gear motor, electric motor, electric gear motor -Actuator for: gate valves, locks, ... -Speed: 40 rpm -Power: 0.7 kW -Construction: hollow shaft -Diameter hollow shaft: 41 mm -Protection class: IP 57 -Number: 1x drives available -Price: per piece -Dimensions: 500/520/H310 mm -Weight: 32 kg

rotary actuator, actuator, actuators, geared motor, electric motor, electric geared motor -Actuator for: gate valves, locks, ... -Speed: 160 rpm -Power: 8.5 kW -Design: hollow shaft -Hollow shaft diameter: 30 mm -Protection class: EX -Number: 2x drives available -Price: per piece -Dimensions: 850/750/H560 mm -Weight: 86 kg

Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm -Weight: 108 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor manufacturer Emod Type: EEDF71L/4 -Transmission manufacturer Nord Type: SK12-71L/4E -Motor power: 0.37 kW -Speed: 45 rpm -Design: B3 -Drive shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: -Weight: 17.4 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus module, bus module, Ethernet -Manufacturer: HMS, Anybus module -Type: ABX-EMBS-PDPS -Number: 3x module available -Price per piece -Dimension: 140/110/H50 mm -Weight: 0.5 kg/pc.

fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Manufacturer: EMI, Axial fan Axial fan -Fan motor:Type: 82D-2010/XX -Voltage: 220V / 50/60 Hz -Power: 10/45 W / 1300/1550 rpm -Impeller: Ø 200 mm -Protective cage: Ø 255 mm -Mounting hole circle: Ø 285 mm -Overall dimensions: Ø 305 x 95 mm -Weight: 1.6 kg

Centrifugal fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, exhaust, chip blower, high performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type T3C 160M2-2 built in 2021 -Motor power: 15 kW / 2940 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 530 x 580 mm / 580 x 470 mm -Quantity: 2x blowers available -Price per piece -Total dimensions: 950/800/H1215 mm / 930/820/H1220 mm -Weight: 395 kg/pc.

Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm -Weight: 395 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Manufacturer:Emmevi, fan wheel cross-flow fan -Article number: COD. 119636 -Voltage: 230V -Fan wheel: both sides Ø 60 x 180 mm -Number: 14x fan wheel available -Price: per piece -Dimensions: 470/100/H95 mm -Weight: 2 kg/piece

Electro-hydraulic lifting device, linear drive, linear gearbox, lifting gearbox, spindle drive, electro-hydraulic actuator for valves, valve drive, actuator, actuator motor, actuator cylinder for rotor brake, disc brake, electro-hydraulic disc brake, crane brake, electro-hydraulic lifting device, lifting drive -Manufacturer: EMG Eldro Electro-hydraulic lifting device, unused -Type: Eldro Ed 80/6 -Item no.: 1045 2806 lifting drive Eldro Ed 80/6 -Stroke: 60 mm -Shaft: Ø 20 mm -Quantity: 4 pieces available Price: per piece -Dimensions: 490/190/H255 mm -Total weight: 22 kg/pc.

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132S/2A -Power: 7.5 kW -Speed: 2880 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 7x available -Price: per piece -Dimensions: 447/310/H250 mm / 450/340/H270 mm -Weight: 51 kg / 63 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Emod, electric motor type 132 S/2AB -Power: 9.2 kW -Speed: 2900 rpm -Design: B5 -Shaft: Ø 38 x 65 mm -Protection class: IP 54 -Number: 4x available -Price: per piece -Dimensions: 450/256/H325 mm -Weight: 66 kg/piece

Planetary gearbox, gearbox, gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, -Manufacturer: Hydropa, gearbox for hydraulic motor -Type: EM1250 FE S45CR1 -Reduction ratio: 1 : 5 -Shaft: Ø65 x 105 mm -Hole shaft: Ø 100 / 94 mm -Number: 2x gearboxes available -Price: per piece -Dimensions: Ø 400 x 500 mm -Weight: 133 kg/piece

Lifting mast, stacker mast, forklift mast, lifting frame, rear stacker, triplex mast -Manufacturer: Clark EML, forklift mast triplex mast type 7000 T -Load capacity: 5000/800 kg -Lifting height: 7500 mm -Height: 3860 mm -technical data: see photo type plate -Recording/Dimensions: see photos / technical drawing -Dimensions: 3730/1300/510 mm -Weight: 2100 kg

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D7-CRV-AS -Branch modules: M56-FRM-1/2-AD7 -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 470/300/H110 mm -Weight: 4.5 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valves: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter control valve: M56-LFR-1/2-D6-CRV-AS -Branch modules: M56-FRM-1/2-Y -Pressure build-up valve: M56-DL-1/2 -Individual components: see photos -Price/Fee: complete -Overall dimensions: 440/340/H110 mm -Weight: 5.3 kg

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Switching valve: MS6-EM1-1/2 -Filter control valve: M56-LFR-1/2-D7-ERM-AS -Switching valves: M56-EE-1/2-V24 M56-EE-1/2-V24-S -Pressure build-up valve: M56-DL-1/2 -Branch module: M56-FRM-1/2-Y -Individual components: see photos -Number: 3x maintenance unit available -Price/Distribution: per piece, complete unit -Dimensions: 440/120/H340 mm -Weight: 5.2 kg/pc.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Pressure output: 2.5 bar -Pumping height approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg