am used for sale

Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm -Weight: 83 kg

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Beckhoff Wittenstein, servo geared motor with bracket -Motor: Beckhoff type AM8053-0G10-0000 -Voltage: 400 V -Power: 2.1 kW -Speed: 2000 rpm -Gearbox: Wittenstein SP 100S-MC2-50 -1G1-2K i= 50 -Shaft: Ø 32 x 60 mm -Dimensions: 450/150/H175 mm Total weight: 19.4 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Beckhoff, servo motor with brake -Type: AM8042-0E21-0000 -Speed: 2500 rpm -Voltage: 400 V -Shaft: Ø 19 x 40 mm -Protection class: IP54 -Brake: 18W -Number: 2 servo motors available -Price: per piece -Dimensions: 265/88/H130 mm -Weight: 4.9 kg/pcs

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Beckhoff Neuigart, servo geared motor with brake -Motor: Beckhoff type: AM8022-0D11-0000 -Voltage: 400 V -Power: 0.59 kW -Speed: 8000 rpm -Transmission: Neugart type PLE080-040-SSSA3AE-Z9 -Shaft: Ø 20 x 35 mm -Protection class: IP54 -Brake: 11 W -Technical data: see photos, nameplate -Dimensions: 320/80/H100 mm -Weight: 4.2 kg

Electric motor, three-phase motor -Condition: unused -Power: 5.5 KW -Speed: 2840 rpm -Shaft: Ø 28 mm -Design: B3/B5 -Protection rating: IP 54 -Flange recess: 180 mm -Flange hole circle: 215 mm -Flange outside diameter: 250 mm -Foot holes: 190 x 140 mm -Price per piece -Pieces: 21x available AEG -Pieces: 18x available ECO Air -Piece: 25x available ECO Air without fan wheel -Dimensions: 370/270/H250 mm -Weight: 30kg

General SKU444X1431 MakeAmkco (Netherlands) TypeA48S-1-88-ACT No.AMS-1803-23 Year of construction2023 Main Features MaterialStainless steel Surface1 m2 Sizes diameter1115 mm Specified Features - Vibro sieve Sieve surface1 m² Inletø 180 mm Outlet2x ø 200 mm Motor1,85 kW (380 V, 1410 rpm) Sieve perforation < 100 micron With ring cleaningcheck MaterialStainless steel 1.4552 Information LocationBarneveld Floor space1,5 x 1,5 m Total height1,3 m Weight500 kg CEcheck Extra Specifications- solid-liquid separationVibro sievesAmkcoSieves > Vibro sievesBrand > Amkco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: R & R Filteranlage, Type: RRFHS-650-JET, Year: 2009, Filter system - negative pressure: yes, Volume flow rate m³/h: 78.000, Filter surface in m²: 651,44, Qty. filter hoses: 324, Hose diameter in mm!: 160, Length of filter tubes: 4.000, Number of filter filter gallerys: 4, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: RTZ 100, Screw conveyor: yes, Number of fans: 5, 1st transport fan - bunker kW: 7,5, 2nd Exhaust fan kW: 37, 3rd Exhaust fan kW: 37, Suction pipe diameter 3 mm: 37, 5th extractor fan kW: 37, Container connection: möglich, FREE TEXT: Aufstellmass 4400 X 4400 mm + Ventilatoren Einhausung 4000 X 4000 mm, Year :2009

: neu : ca. 6 Monate ab Auftragse : Taiwan : 50900 € : 962.01 € : 2540 mm : 6.5 mm : Hydraulisch : 135 ° : 3900 mm : 1750 mm : 2050 mm : 6200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° € 48.300,-- OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm € 11.400,-- (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

Vacuum pump, Flow rate (m3/h): 35, Elec: 400 V / 50 Hz , Engine: Brook Crompton 1.5 kW

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 € : 744.9 € : 2035 mm : 2.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AMC Hydromatic 330 label pusher Professional machine made in Italy AMC is a world leader in the production of label die-cutting machines Very good conditions The machine is operational, ready for production Technical data: Max. size 330x330 mm Number of cycles 18/ min Productivity 900.000 sheets/h Weight 700 kg The machine has a quick-acting hydraulic unit Photo security barriers The feeding table is adjustable in every plane Two operating modes: semi-automatic, manual The tail is on the way Many dies available

sheet width: 2500 mm plate thickness: 4 mm weight of the machine ca.: 5.000 kg dimensions of the machine ca.: 3000 x 2000 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 70 -800 kN chamfer lenght: 2505 mm distance between columns: 2125 mm Control: OP 2000 controlled axis: 7 throat: 420 mm stroke: 200 mm dayligth: 470 mm Number of working hours: h table width: 60 mm table height: 960 mm ajustment speed: 100 mm/sec working feed: 10 mm/sec return speed: 100 mm/sec weight of the machine ca.: 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 € : 1060.29 € : 2540 mm : 3.5 mm : Hydraulisch : 135 ° : 3 kW : 3850 mm : 1700 mm : 1860 mm : 3700 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules (sample photo showing model V-AMH 2535 2 axes NC control) OPTION: 2 axes NC control with touchscreen incl. motorized back gauge 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU283U516 MakeRuberg-Mischtechnik KG (Amixon) TypeVM1500 No.VM1500/1639 Year of construction2000 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor22 KW Specified Features - Ribbon blender Ribbon blendercheck Capacity1932Ltr. Useful capacity1500Ltr. Trough sizesDia: 1350x1350mm InletDia: 300mm, 80mm Manhole485x1000mm OutletDia: 200mm Interrupted ribboncheck Max. temperature40°C Motor22kW, 400Volt, 1465rpm Speed mixing shaft28 rpm MaterialStainless steel 1.4571 (316Ti) Information Floor space2,1x1,6m Total height2,1m Weight2400kgRibbon blendersTea, herbs & coffeeRuberg Mischtechnik KGMixers > Ribbon blendersIndustries > Food & Feed > Tea, herbs & coffeeBrand > Ruberg Mischtechnik KG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 € : 909.16 € : 3100 mm : 2.5 mm : Hydraulisch : 135 ° : 4300 mm : 1770 mm : 1890 mm : 4000 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used fruit belt press from Amos type AEP 20. The press is complete with a pasteurizer, tank, bathtubs and tipper. I have a spare tape with a width of 2500 mm for the press. ( worked for 1 season, good condition). Manufacturer's documentation.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47400 € : 905.34 € : 2540 mm : 4.5 mm : Hydraulisch : 135 ° : 3900 mm : 1700 mm : 1900 mm : 5100 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 62000 € : 1171.8 € : 3100 mm : 2 mm : Hydraulisch : 135 ° : 5 kW : 4370 mm : 1770 mm : 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: ABB Type: AMG 0900SM10 LSE Built year: 2015 Condition: New / Unused Output: 5238 kVA Voltage: 6600 V Frequency: 60 Hz Speed: 720 rpm Weight: 20,000 kg

with Fanuc 18P-C

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56500 € : 1067.85 € : 3100 mm : 6.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 2050 mm : 6800 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 45700 € : 872.87 € : 2035 mm : 6.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3710 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 52900 € : 999.81 € : 3100 mm : 4.5 mm : Hydraulisch : 135 ° : 4500 mm : 1750 mm : 1950 mm : 5500 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 42600 € : 813.66 € : 2035 mm : 4.5 mm : Hydraulisch : 135 ° : 3300 mm : 1550 mm : 1900 mm : 3200 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU212T536 LocationBarneveld CEcheck MakeAmmag Main Features Motor1.5 KW Length1400 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Horizontal conveyor screwcheck Diameter187 mm Length1398,5 mm Shaft diameter106 mm Pitch103 mm InletDia. 200 mm OutletDia. 200 mm Motor1,5 kW 220-240/380-415 Volt (Ex) Screw speed96 rpm Outlet height388,9 mm Height between in- and outlet1130,1 mm Information TypeRDSCHN D187x1300x3,9° Mach.No.SR-1601 SG09 Year of construction2008 Floorspace1,1x0,5 m Total height0,65 m Weight230 kg ATEX compatiblecheckCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBi ...

General SKU026A131 MakeAmbles Andeville No.HDA:581 Year of construction9-1995 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume100 Ltr. Motor0.37 KW Specified Features - Ribbon blender Ribbon blender/Vacuum mixer (1x) Double shaftcheck Capacity100 Ltr. Trough sizes500 x 600 x 300 mm With covercheck Outletpneumatically operated With jacketcheck Max. temperature100 °C Motor(2x), 2 Speed (0,37 kW) Speed mixing shaftmax. 75 rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floor space1,8 x 1,0 m Total height1,4 m Extra SpecificationsWith vacuum pump (0.75 kW) DiscountRibbon blendersTea, herbs & coffeeAmbles AndevillDiscountMixers > Ribbon blendersIndustries > Food & Feed > Tea, herbs & coffeeBrand > Ambles Andevill What you can expect from Foeth: -- Machine is in  ...

General SKU104X560 MakeAmbau Kiel No.2986/11/11 Year of construction1970 Mounted on legscheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume925 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactor(1x) Capacity925 Ltr Vessel sizesdia. 1100x800mm Dished bottomcheck Dished top sidecheck Outletdia. 60mm With jacket(100 Ltr) Max. temperature150 Degr. C. With propellor stirrercheck Motor2,2 KW, 220/380 Volt Speed mixing shaft± 240-1200 Rpm Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information LocationBarneveld Floorspace2,2x1,4 M Total height2,0 M Weight1100 KGCatalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & p ...

General SKU075B496 MakeAML Advance Mixing LTD Stroud No.7134 Year of construction1999 Mounted on framecheck Main Features MaterialStainless steel Volume120 Ltr. Motor4 KW Inlet diameter400 mm Specified Features - Kneader MaterialStainless steel 1.4301 (304) Single screw cont. kneaderContinuous dough preparation line (1x) AC-motor4,0 KW, 380/415 Volt With variable speed drive4,0 KW, 380/415 Volt Feeding with hopper(Capacity 600 KG) Capacity200-300 kg p/Hr With variable speed drivecheck Information LocationBarneveld With switchgearcheck Floorspace3,0x2,4 M Total height5,6 MDiscountKneadersAML StroudDiscountKneaders > KneadersBrand > AML Stroud What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU234M148 LocationBarneveld Makeunknown, typeplate is missing Main Features Motor3 KW Length5000 mm Inlet diameter400 mm Specified Features - Vertical screw conveyor Vertical conveyor screwcheck Tube-modelcheck Diameterscrew 400mm Lengthscrew 3,4 M Motorscrew 4 KW 380 Volt, floveyor 3 KW 380 Volt Screw speed28 rpm Conveying height5,0 M MaterialStainless steel Information Typefloveyor With switchcheck Floorspace+/- 3,5x1,5x1,0 M Total height+/- 6,0 M Weight1400 KGCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedVertical screw conveyorsOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine  ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 57500 € : 1086.75 € : 4010 mm : 2 mm : Hydraulisch : 135 ° : 5600 mm : 1750 mm : 2050 mm : 4600 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control Schneider7", touchscreen incl. motorized back gauge 800 mm (sample photos) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 50700 € : 958.23 € : 1 : 2035 mm : 3.5 mm : Hydraulisch : 135 ° : 3000 mm : 1100 mm : 1750 mm : 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake Amada Astro HDS 1030 / NTR BJ 2010

Bottling line for approx. 5000 bottles/h, Additional title: returnable glass bottle filling, years of construction 1990 - 2016, Capacity: 5000 bo/h, Formats: Eurobottle 0,5 l, Longneck 0,33 l , swing top 0,5 l, Position: free standing, Features: Unpacker (JOHA Diamant M1), bottle washer (Klinger, 2016, 7,000 bph, empty bottle inspector (Heuft Reflexx InLine IR, 2016, 8,000 bph) bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 capping units, 6,000 bph) Labelling machine (Gernep, 2014, 9000 bph), packer (JOHA Diamant M1), crate washer, caustic settling tank

ESTRUSORE PRINCIPALE EA100/52D CO-ESTRUSORE EA48/40D CAMBIA FILTRI A PIASTRA POMPA INGRANAGGI TAGLIO AUTOMATICO TA100 AVVOLGITORE A 2 STAZIONI CON TRAINO CATTORINI Materiali lavorati: HIPS-ABS-PP (fatto dei test positivi anche con PLA) Spessore minimo 37/100, Spessore massimo 150/100

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82

Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobari ...

Inv. Num. : 9078 Type: LC 3015 F1 NT Producer: AMADA Generated: Parameters: Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3070 mm Y-axis feed length: 1550 mm Feed length Z-axis: 100 mm

Used Filling Monoblock CIMEC 6-6-1 1000 bph Technical Features and Specifications The Used Filling Monoblock CIMEC 6-6-1 1000 bph, model AMERICA DPS 6/6/1 EAGLE C, offers a versatile and reliable solution for isobaric bottling processes, specifically designed for beer production. Manufactured by the Italian company CIMEC in 2003, this monoblock integrates advanced features to ensure precision, quality, and operational safety. Structure and Configuration of the Monoblock The CIMEC 6-6-1 monoblock combines three key units into one compact structure: a rinser, an isobaric filler, and a capper. This configuration, therefore, optimizes line space and reduces processing time, ensuring a maximum output of 1000 bottles per hour (bph). Rinser: Equipped with 6 grippers for bottle holding and a single treatment with a fixed nozzle, it efficiently cleans the bottles before the filling process. Addit ...

Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable  ...

Technical Specifications & Performance Data The Used Filling Machine AL AMANE Aman Pack C30 - 2019 offers optimal efficiency in industrial packaging, making it a prime choice for any second hand beverage production line. This filling machine features a robust production speed of 2800 bottles per hour, ensuring a steady output for mid-sized operations. It accommodates various bottle formats, including 0.12 L, 0.25 L, 0.33 L, and 0.50 L capacities. Designed for flexibility, it supports Brik container types. Dimensions: Width: 1250mm, Length: 3400mm, Height: 2900mm Electrical: 380V, 50Hz, 15kW Number of valves: 2 Advanced Automation & Control Systems The Aman Pack C30 integrates advanced automation, ensuring seamless operation within your used bottling line. The control systems are intuitive, featuring a state-of-the-art control panel for efficient management. Operating on a stable 380V, 50 ...

Technical Specifications & Performance Data The Mondo & Scaglione Used Case Erector from 2005 is a reliable, second hand solution engineered for continuous-duty industrial packaging environments. Purpose-built to erect and square corrugated cases for downstream packing of PET bottles, glass bottles, and aluminum cans, it supports a broad spectrum of beverage production lines handling water, juice, beer, wine, and more. Manufacturer: Mondo & Scaglione Year of manufacture: 2005 Category: Case Erector Nominal speed: up to 1,500 boxes/hour Closure configuration: Single closure station (Closure: 1) Condition: In storage Safety features: Included (guards/interlocks typical for class) Documentation: Manuals available Container ecosystem: Supports lines for PET, glass, and aluminum containers Typical application: Beverage production (water, juice, beer, wine) and general used bottling line opera ...

Used Case Erector Mondo & Scaglione 376 / C up to 23 box/min This Case Erector not only forms cardboard boxes of the “American” type but also ensures high efficiency and reliability. Additionally, it seals the bottom of each box with hot melt glue, and, most importantly, it processes up to 23 boxes per minute. Therefore, it is perfect for production lines that demand both precision and speed. Carton Magazine and Carton Transfer Carriage First, the machine features a horizontally mounted carton magazine at the lower rear, which optimizes space and provides easy access for loading. Furthermore, the multifunction carton transfer carriage picks, opens, and transfers cartons using an electromechanical control system. As a result, this setup ensures precise, continuous operation and significantly reduces downtime during format changes or adjustments. Flap Closing and Glue Applicati ...

Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph This Used Case Packer delivers high efficiency and, therefore, meets the demands of large-scale bottling operations. Mondo & Scaglione manufactured this machine, which remains in storage, ready for reinstallation and immediate use in production plants. Its technical specifications and safety features, as a result, ensure reliable and automated packaging. Technical Specifications of the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph reaches operational speeds of up to 10000 bottles per hour (BPH). Consequently, this performance makes it perfect for high-volume production lines, where maintaining speed and operational continuity is crucial for efficient output. The machine includes 18 fixed heads, which ensure steady and consistent performance throughout the pa ...

Used Labeler Cavagnino & Gatti CG-84-FR 3-8 3000 bph Year 2001 For flasks of 150 mm in diameter These Cavagnino & Gatti rotary wet glue labelers are capable of production speeds from 4,000 to 9,000 bottles per hour with applications throughout the wine, beverage, food, chemical and household industries. The CG84CR-DR-FR series of machines are the result of an innovative design that has allowed for a reduction of components of the labeling unit which has resulted in important advantages in terms of economy, ease-of-use, changeover time and maintenance. This series of C&G machines are available with either the standard bottle platform motion by double profile cam in an oil bath or by programmable servo-platforms MP. These labelers can be equipped with various optical and/or mechanical spotting systems for the automatic alignment of printed capsules, glass cartouches, side and bottom notchl ...

Machine Overview The labeling machine Cavagnino&Gatti is a rotary labelling machine manufactured by CAVAGNINO & GATTI in 2002. It features a 14-plate carousel with counterclockwise rotation and is equipped with a mixed technology configuration: three pressure-sensitive (self-adhesive) labelling stations and one cold-glue station. The machine is designed to apply front and back body labels in a single pass, with an additional station dedicated to a bottom label approximately 2 × 6 cm. This architecture enables flexible set-ups, from adhesive-only operation to hybrid cycles where a cold-glue label (e.g., tax strip or wrap component) is combined with pressure-sensitive labels. The 14 rotating bottle plates provide stable container handling for consistent label placement. Typical applications include glass or PET containers across beverages and specialty foods, as permitted by the install ...

Used Labeling Machine Cavagnino & Gatti 1999 The Cavagnino & Gatti CG 80 is a used labeling machine manufactured in 1999. This high-speed labeling machine offers exceptional performance and reliability for various labeling applications. With its advanced features and sturdy construction, it has become a preferred choice in the industry. Key Features and Specifications The CG 80 model is equipped with five heads, enabling efficient labeling operations. It boasts two front and back adhesive stations, as well as a glue station, allowing for versatile labeling options. The machine operates in an anticlockwise rotation, ensuring smooth and precise label application. A notable feature of the CG 80 is its rotating plate with Malta crosses, providing stability and accuracy during the labeling process. The entire machine is enclosed in stainless steel, ensuring hygiene standards and durability. S ...