am used for sale

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...

Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays or loose. Automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: SHRINKtunnel-PE-XL). - Technical specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6.0bar / 0.1m?/min | max. speed of the machine in neutral: 14 cycles/min | max. product dimensions (mm): L400xW300xH330 | sealing blade width: 700mm | machine dimensions (mm): L1360xW2720xH1900 | weight (net/gross): 465/550kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are avail ...

Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

PRO-Version of our standard Sleeve packer / film band roller for film wrapping of large products. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. Completely closed housing, new design and strong structure. - Technical Specifications (can vary regarding customers specifications !): MITSUBISHI/Japan PLC | 380V, 2kW | 6bar / 0.1m?/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): L(unlimited)xW(200-550)xH(15-250) | machine dimensions (mm): L1375xW1180xH1810 | weight (net/gross): 500/580kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Dev ...

Flowshrink machine for high-speed packaging of products in a special range of product sizes. Double drive longitudinal sealer system ensures firm and smooth longitudinal sealing. Blade Position Adjusting on Power-Off function. Servo drive system ensures precise and stable performance. Very economic alternative to side sealing systems when less flexible product sizes are used. - Specifications: packaging sizes: L(100-300)xW(30-100)xH(2-100)mm | sealing bar width: 230mm | max. speed of the machine in neutral: 100 cycles/minute | power: 220V, 3.75kW | infeed length: 3000mm | machine dimensions: L5050xW1190xH1650mm | weight: 1020kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from ap ...

Sleeve packer / film band roller for film wrapping of large products. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. - Technical specifications: MITSUBISHI/Japan PLC | 380V, 2kW | 6Bar / 0.1m?/min | max. speed of the machine in neutral: 25 cycles/min | max. product dimensions (mm): L700xW500xH330 (W+H

Fully automatic production line for the manufacture of FFP2 dust masks (KN95). Stable and efficient production of single-use dusk masks with FFP2 protection class (KN95) and made of 4-5 layers of material. Production procedure: Material feeding from roll (up to 5 layers) | feeding, cutting and ultrasonic welding of the nose-bridge | ultrasonic welding of the ear strap | folding and shaping of the mask | ultrasonic welding of the mask edges | punching (separating) and ejection. The tension of the feed materials can be controlled separately for each material. By changing the templates, masks of different sizes and styles can be produced. Controlled by Mitsubishi PLC, operation via Weinview touch screen. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | power: 8kW, 220V | machine dimensions L6000xW1000xH1800mm | weight: 1500kg. Video on YouTube:

Fully automatic production line for the manufacture of surgical masks. Stable and efficient production of single-use surgical masks made of 3-4 layers of material. After welding the layers on top of each other, the production for welding the ear straps is expanded to 2 lines to achieve a constant high output. PLC control, operation via touch screen. - Specifications: max. speed of the machine in neutral: 65 cycles/minute (corresponds to 130 masks/minute) | mask dimensions: L175xW95mm | power: 9kW, 220V | machine dimensions L6500xW4500xH1900mm | weight: 1800kg. Video on YouTube:

Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | conveyor belt speed: 13m/minute | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850x ...

Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 25 cycles/minute | conveyor belt speed : 0-13m/min | cap diameter: customized | power: 220V, 3.5kW | compressed air: 3-5bar, 0.1m? | materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic | machine dimensions and weight: L1450xW850xH1600mm, 350kg | Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized ...

Capping Module to press caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 15-100mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Cap Liftinig and Arranging Machine to feed Capping Modules. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 50-100mm | power: 220V, 0.2kW | machine dimensions: L1250xW980xH2500mm | weight: 90kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Machine to close (seal) cans/plastic containers with a neck diameter of 30-90 mm with cling film/security film. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Machine to close cans by seaming the lid onto the can. - Range for can: diameter: 35-130mm, height: 50-200mm | max. speed of the machine in neutral: 30 cycles/min | power: 220/380V, 1.1kW | machine dimensions and weight: L3000?W900?H900mm | wieght: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Machine to close (seal with film onto the edge of bottles, glases, cans, etc.) container with a neck diameter of 30-90 mm. Working direction: from left to right. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | 380V, 2.0kW | Machine dimensions: L1600xW800xH1160mm | weight: 180kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50  ...

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

Cello wrapper for small products. The cellophane overwrapping machine is especially designed for wrapping of small boxes for smoking papers, playing card decks, razor blades, chewing gum packs, etc. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | product dimensions: L(110-150)xW(70-120)xH(5-30)mm | power: 220V, 3kW | compressed air: 3bar | machine dimensions: L1500xW700xH1650mm | weight: approx. 410kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Cellophane wrapping machine for small products. - Technical specifications: max. speed of the machine in neutral: max. 45 cycles/minute | product dimensions (mm): L(110-150)xW(70-120)xH(5-30) - (W+H

X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6

Double cone kneader, W & P, DK 65, mobile

Stainless steel kneading tray with trolley for universal mixer UC 120 A / AC, Fabr. W & P

Manufacturer: AMADA Model: LC 2415 A3 Year of Manufacture: 2004 Machine Type: Laser Contour Machine / Laser Cutting Machine Laser Power: 2.0 kW Power Requirement: 43 kVA Weight: 6.3 tons Find more here - / Contact us at -

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

Mobile Articulated Measuring Arm Measuring Machine Gauge Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of Make: 2010 Measuring Ø: 2,400 mm

Name: Compressed Air Maintenance Unit Manufacturer: SMC Type: AMR4100-04 (MIST SEP/REG) Country: Japan Short Description: Combined compressed air maintenance unit (regulator + oil/water separator) with integrated pressure gauge (M.R. Unit). 0.3 μm filtration, manual emptying, pressure range approx. 0.5–8.5 bar. Typical for CNC machines (e.g. MAZAK H500/40). Robustly built, with BSP thread in 1/2.

Name: Automatic Lubrication Unit AMO-II-1503 Manufacturer: LUBE Corporation, Japan Specifications: Model No.: AMO-II-1503 Voltage: AC 100 V Output Power: 20W Current consumption: 0.63/0.64 A Frequency: 50/60 Hz Phase: Single-phase, 2-pole Delivery pressure: 20 kg/cm² Flow rate: 150 cc/min (at 50 Hz), 180 cc/min (at 60 Hz) Tank capacity: approx. 1.8–2 litres Weight: approx. 4.08 kg Dimensions: 275 × 140 × 260 mm Origin: Removed from MAZAK H500/40 Serial Number: 610326

Amada Promecam ITPS 100 ton x 3100 mm CNC Capacity: 100 ton x 3100 mm Backgauge: CNC Control: EMA Passage between uprights: 2600 mm Max stroke: 105 mm Max distance between table -- ram: 370 mm Depth of throat: 400 mm Table width: 90 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 10 kW Length: 3640 mm Depth: 2210 mm Height: 2340 mm Weight: 6580 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 10 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/sec Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

- 8 assen: Y1 / Y2 / X / R1 / R2 / Z1 / Z2 / V - nieuwe 2D Touch grafische besturing - zware achteraanslag - Amada-bomberingssysteem (V) - nieuw laserbeveiligingssysteem Machine kan gedemonteerd worden in onderdelen, kan in containers worden getransporteerd Capacity: 630 ton x 8100 mm Backgauge: heavy duty CNC Control: 2D Touch Passage between uprights: 7210 mm Max stroke: 350 mm Max distance between table -- ram: 650 mm Depth of throat: 400 mm Table width: 350 mm Locking speed: 70 mm/sec Working speed: 8 mm/sec Returning speed: 50 mm/sec Electric motor (power): 47 kW Power needed: 380V Length: 8300 mm Depth: 2600 mm Height: 4400 mm Weight: 90 ton

Used line for pouring liquids by AMSY. New 2012, complete. Line composition: - pouring machine, - creasing machine (2 creasing machines, one for stoppers , the other for triggers). Capacity of the line for confectioning liquids, gels about 800 pcs/hour. PET, HDPE bottles capacity from 200 ml to 5 L (carboys). Full documentation.

AMUTEC TCR S 1200, reel-to-reel pre-cut bags, Construction year 2003,, totally revisioned in 2024 by Constructors technicians, very well maintained

FOR SALE: AMADA PROMECAM GS 1230 Hydraulic Guillotine Shears – 3050 mm / Up to 15 mm Steel Precision industrial machine – Very little used – Former training centre Pristine condition – Works flawlessly – Ready to use ✅ Technical characteristics: • Model: AMADA PROMECAM GS 1230 •Type: Hydraulic Guillotine Shear • Useful cutting length: 3050 mm • Maximum thickness: 12 mm standard steel, up to 15 mm on steel sheet • Motorized backgauge (numerically controlled) • Cutting angle and blade spacing adjustment • Integrated ball table for moving sheet metal • Hydraulic front holding cylinders • Power: 15 kW / 20 HP – Three phase • Power supply: 400/415 V – 32 A – 50 Hz • Cutting force: 361 kN • Blade stroke: 190 mm •Year: 1999 •Made in Europe – AMADA reference brand Applications: Perfect for industrial boilermaking, shee ...

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

2004 AMADA EM2510NT Hours in picture Punching Capacity: Up to 25 ton, ideal for precision sheet metal work Bed Size: 1,250 × 1,000 mm working area Tooling: Equipped with a versatile turret and standard AMADA tooling Condition: Well‑maintained, with recent inspections and service—ready for production Find more here - / Contact us at -

Sammelhefter / Saddle Stitcher Müller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - SN. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - SN. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - SN. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - SN. MMZ0 1 306 445 Bandauslage / Band Delivery Müller Martini 1564.0400 Manuals all included

Inv. Num. : 8487 Type: ENSIS 3015 AJ Producer: AMADA Created: 2019 Parameters: Maximum power: 6 kW Switch-on hours: 19,588 h Operating hours: 10,631 h Work table length: 3000 mm Work table width: 1500 mm Feed length X-axis: 3000 mm Y-axis feed length: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

Kreuzleger / Compensating Stacker Müller Martini Perfetto Amrys Year 2007 - SN. MMZO 1 306 445 - 60 Mechanische Leistung - Meachnic Spped max. 16.000Ex/h Manuals all included --sehr guter Zustand / very good condition--

Anleimmaschine / Gluing machine Tränklein  AM500 Serial-No. 2535

Manufacturer: Amada Model: EM2510NT Year of Manufacture: 2011 Machine Weight: 16500 kg Type of Machine : Punching Machine Operating Hours: 14272 Control Unit Manufacturer: Fanuc Model: Series 180I PB Find more here - / Contact us at -

Manufacture: URT Year of Manufacture: 2018 Model: Testing Station Steering Wheel AMG Certification: CE Marked Find more here - / Contact us at -

Manufacturer: URT Model: Steering Wheel Test Station AMG Year of Manufacture: 2019 Electrical Connection: 230V, 50Hz, 20A, 1/N/PE (EU) Pneumatic Pressure: 5 bar Weight: 800 kg Find more here - / Contact us at -

Dough dividing and casting machine, type Multimatic C, 4 rows,

Key data: 3000 mm, 1500 mm, 4000 W

3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Amada punching machine EMK 3610NT incl. loading unit MP300 for sale. We would like to hand over the machine complete with tools and Wilson X-Sharp grinding machine.