alö used for sale

General SKU390T1165 LocationBarneveld MakeA. Bolz Wangen TypeDB-900-M3 No.M041355 Year of construction2000 Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume9000 Ltr. Motor30 KW Specified Features - Conical mixer MaterialStainless steel 1.4404 (316L) Density1.16 kg/dm³ Conical mixercheck Capacity9000 Ltr. (Bruto 18000 Ltr.) Largest cone diameter3330 mm Cone height5205 mm ManholeDN700 With stainless steel armcheck Motor1: 18,5/30 kW 690/400-415 Volt, 2: 2,2 kW 230/400-415 Volt With variable speed drivecheck screw speed (nominal): 66 rpm, arm speed (nominal): 0,7 rpm Motor3 kW Bottom bearing pintle bearingcheck Max. temperature100 °C Bottom dischargeDN 250/300 (side) Information Total height6,5 m Weight7250 kg Floor space3,6x3,6 m ATEX compatiblecheck Extra SpecificationsThis conical mixer is equipped with a Valve: Bolz product ...

General SKU300U581 LocationBarneveld MakeServoloft GmbH TypeLabor Mischer No.10323 Year of construction2001 Main Features MaterialStainless steel Volume20 Ltr. Motor0.75 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck Capacity20Ltr, 10Ltr(2x), 5Ltr. Diameter350mm, 270mm, 220mm Length/Depth327mm, 259mm, 195mm Cylindrical length140mm, 122mm, 90mm Conical length187mm, 137mm, 105mm InletDia: 170mm OutletDia: 50mm With motor0,75kW 230/400Volt, and 0,12kW, 230/400Volt With brake motorcheck Speed mixerX-axis 3-12 rpm, Y-axis 5-20rpm MaterialStainless steel 1.4435 (316L) Information Mounted on stainl. steel framecheck With switchcheck With switchgearcheck(as is) Weight450kg CEcheck Floorspace1.46x0.79m Total height1.6m Extra SpecificationsThis tumble mixer from Servolift mixes along the X-axis and the Y-axis. The maximum weight to be m ...

General SKU212T479 LocationBarneveld MakeAlbi Alois Binderberger No.446 Year of construction1991 Main Features MaterialStainless steel Volume3640 Ltr. Pressure2 Bar Specified Features - Horizontal tank MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Horizontal tankcheck Capacity3640 Ltr. (max. 3690 Ltr.) Sizes1200x3500 mm ManholeDN600 Top connectionsDN80 (2x) OutletDN25, DN50 Max. temperaturemax. 100 °C Information Mounted on legs4 Floorspace3,5x1,0 m Total height1,6 mHorizontal tanksAlbi Alois BinderbergerTanks > Horizontal tanksBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU356S859 LocationBarneveld MakeAlois Binderberger No.1363 Year of construction1996 Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume20000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Notified bodyTÜV Capacity20000Ltr netto, 23600Ltr. bruto Vessel sizes5000x3000mm Dished topcheck Dished bottomcheck Dished frontscheck ManholeDN600 Top connectionscheckDN80(2x),DN50(2x), DN40, DN25(4x) OutletDN80(2x), DN50 Max. temperature85°C Information Mounted on legscheck Floorspace5x3m Total height3,05m Weight4400kgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU345S1080 LocationBarneveld MakeALBI No.1277 Year of construction1995 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume400 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified bodyTÜV Capacity400 Ltr. Dished topcheck Dished bottomcheck Manholedia. 450 mm Top connectionsDN25 (4x), DN100 OutletDN25, DN15 Max. temperature-25/130 °C Information Mounted on legscheck Floorspace0,9x1,3 m Total height2 m Weight500 kgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU232S114 LocationBarneveld MakeTerlet (NL) TypeMaxxitherm No.0410143 Year of construction2005 Pressure Working pressure5 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor1.1 KW Surface7.5 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4404 (316L) Scraped surface heat exchangercheck Number of stages:1 Heating surfaceca 7.5 m2 Heating surface shellinner wall ca. 3.5 m2 outher wall ca. 4 m2 Cylinder sizesouther wall dia. 560x2400mm (1x), inner wall dia. 500x2400mm (1x) Max. temperature-10/100 degr. C With jacketcheck Max. temperature153 degr. C InletDN80 OutletDN80 Motor1.1 kW 220-240/380-415 Volt Speed1,4 rpm Information Mounted on framecheck Mounted on wheelscheck Total height2.1 M Weight2100 Kg CEcheck Floorspace4.0x1.2 M Extra SpecificationsThe Maxxitherm brings about a continuous  ...

General SKU345S690 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1249 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6300 Ltr (7700 Ltr) Vessel sizesDia: 2000 x2000mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN100, DN80, DN50 OutletDN80 With jacketcheck 200 Ltr Max. temperature-30/200°C. With paddle stirrerHWL-080-D Motor15,0 KW, 400 Volt (EEx deIICT4) Speed mixing shaft6-63 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,5x2,5m Total height3m Weight3200kg ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubr ...

General SKU345S713 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1251 Year of construction1994 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 Ltr. (15175 Ltr.) Vessel sizesdia. 2400x3440 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN100, DN80, DN50, DN25 OutletDN80 Half coil jacketedcheck (340 Ltr.) Max. temperature-25/130 °C With paddle stirrercheck (HWL80-D) Motor15 kw, 400 Volt (EEx de IICT4) Speed mixing shaft71 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,6x2,6 m Total height3,5 m Weight4200 kg ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSo ...

General SKU345S686 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1248 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6300 Ltr. (max. 7700 Ltr) Vessel sizesdia. 2000x2000 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN100, DN80, DN50 OutletDN80 Half coil jacketedcheck (200 Ltr.) Max. temperature-30/200 °C With paddle stirrercheck Motor15,0 KW, 400 Volt (EExdeIICT4) Speed mixing shaft62 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgrochemicalsSolid pharmaceuticsRubberLubricants & oleoOther chemicalStainless Stee ...

General SKU356S851 LocationBarneveld MakeALBI Alois Binderberger No.1361 Year of construction1996 Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume530 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel Notified body(TÜV) Capacity530 Ltr. Vessel sizesdia. 700x1900 mm Dished bottomcheck Dished frontscheck Top connectionsDN25/33,7. dia. 56 mm, dia.160 mm Outletdia. 70 mm Max. temperature0/160 Degr. C With jacketcheck Information Mounted on legscheck Floorspace2,2x1 M Total height1,5 M Weight300 KgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

General SKU356S849 LocationBarneveld MakeAlois Binderberger Albi (AT) Type6300 ltr. No.1360 Year of construction1996 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume6300 Ltr. Motor7 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4539 (904L) Stainless Steel Reactors Reactorcheck Capacity5800 Ltr (total 6300) Vessel sizesdia.1800 x2000mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN25 (4x), DN50 (2x), DN80 (3x) OutletDN50 Half coil jacketed(120 ltr) Max. temperature-20/130 Degr.C. With paddle stirrerSpeiss Semix 060 Motorcheck Speed mixing shaft146 rpm Information Total height4,7 m Weight2900 kg Floorspace2,5x2,5 m Extra Specificationswith different spare parts (as it is) and 2x Hastelloy C22 Turbodisc VSHF 100/360 dgr tankw ...

General SKU345S710 LocationBarneveld MakeAlois Binderberger Albi (AT) No.1250 Year of construction1994 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket9 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume6300 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6300 Ltr. (max. 7700 Ltr.) Vessel sizesdia. 2000x2940 mm Dished bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN250, DN200, DN150, DN80, DN50 OutletDN80 Half coil jacketedcheck (200 Ltr.) Max. temperature-30/200 °C With paddle stirrercheck (HWL 080-D) Motor15 KW, 400 Volt (EExdeII CT4) Speed mixing shaft62 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Floorspace2,5x2,5 m Total height3 m ATEX compatiblecheckMinerals & inorganicAPIPlastic & polymersDyes & pigmentsAgro ...

General SKU213T157 LocationBarneveld MakeAlbi Alois Binderberger No.625 Year of construction1983 Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume8000 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity8.000 Ltr. (max. 10.000 Ltr.) Vessel sizesdia. 2200x3562 mm Conical bottomcheck Dished top sidecheck Manholecheck Top connectionsDN40 (4x), DN65, DN100 OutletDN65 With jacketcheck Half coil jacketedcheck Max. temperature-25/150 °C With paddle stirrercheck (Stelzer: Vortex) Motor7.5 kW (Ex) Speed mixing shaft5,6-56 Rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace2,6x2,6 m Total height4,8 m ATEX compatiblecheck Extra SpecificationsINCLUDING NEW MECHANICAL SEAL Minerals & inorganicAPIP ...

General SKU213T164 LocationAustria MakeAlbi Alois Binderberger No.561 Year of construction1981 Pressure Working pressure2 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor4 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity10000 Ltr. Conical bottomcheck Manholecheck With paddle stirrercheck Motor4 kW, (Ex) Speed mixing shaft60 Rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Total height3696 Cm Weight1500 Kg ATEX compatiblecheck Extra SpecificationsINCLUDING NEW MECHANICAL SEAL Stirring vesselsAlbi Alois BinderbergerStirring vessels > Stirring vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The  ...

TRUMPF TruLaser 3030 laser cutting machine built in Germany in 2007 provides excellent laser cutting quality while maintaining low operating costs. Designed for even the most demanding challenges, the machine machines workpieces with a maximum thickness of 12 mm with high precision and quality, making it suitable for any production facility. The stable 2 kW laser beam used during cutting produces very smooth and even edges along the entire length of the workpiece, regardless of the type of material. To further improve the workflow and reduce machine downtime to a minimum, the work table is equipped with an integrated automatic pallet changing system which allows workpieces to be loaded and unloaded simultaneously during the cutting process. The TRUMPF laser cutting machine weighs approximately 11500 kg. Technical specifications of the TRUMPF TruLaser 3030 laser - laser power: 2 kW (2 ...

Modular tube filler for pharmaceutical, cosmetic, chemical and food products. The modular concept allows it to grow along with customer needs, an initial configuration can be completed with automatic tube loading, device and tube print registration, manual or automatic tube feeding, heat sealing of plastic and laminated tubes. by means of hot jaws, compact operator panel, suitable for memorizing the working parameters. Tube diameter from 28 to 55 mm. Dosing capacity from 3 ml to 240 ml. Characteristics Model: COMBI Year 2002 Width: 1150mm Height: 2300mm Length: 2000mm Tube diameter from 28 to 55 mm Dosing capacity from 3 ml to 240 ml

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...

Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 5205200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.

SCRAP CHOPPER The Model CE450 DDX boasts power alongside a dual driven feedworks. Driving both feed rolls on the chopper allows the unit to process scrap quickly and efficiently. The Model CE450 DDX is Sweed’s chopper of choice for companies processing large volumes of scrap plastic or PET strapping. This chopper is extremely versatile and can be customized for inline automated production applications requiring tension control and custom scrap lengths. The Model CE450 DDX is designed to fit on several Sweed stands that can accommodate a variety of scrap collection containers. Custom stands and additional safety upgrades are also available. Material Reference The recommended model of scrap chopper is determined by scrap size, scrap volume, and requested custom features. The following are materials commonly processed through the CE450 DDX. Please consult a Sweed representative to ...

Control: Fanuc 0-iTD + Manual Guide I Specification: Swing over bed: 805 mm Swing over support: 720 mm Swing over cross slide: 515 mm Center height: 400 mm Turning length: 3000 mm Spindle motor power: 17 kW Spindle speed: 0-450, 450-1700 U / min (stepless) axes Z, X: 0-7000 mm / min Rapid advance along the Z axis, X: 10 m / min Spindle taper: MT5 Spindle bore: 105MM Tool number: 12 pieces Cooling: External Hydraulic tailstock Inner cone tailstock: Morse 6 Machine weight about 6.46 t 5530 x 1800 x 2230 mm this extra information is standard for this model. Please always double-check the details during a visit The Metosa Pinachio ST 400 CNC lathe is a precision-engineered machine designed for high-performance metal turning operations. Equipped with a Fanuc 0-iTD control system along with Manual Guide I, this lathe offers intuitive operation and advanced programmi ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 107600 € : 2141.24 € : 135 to : 3050 mm : 4 : 320 mm : 3340 mm : 500 mm : servomotorischer Riemenan : 100 mm/s : 10 mm/s : 100 mm/s : 650 mm : 250 mm : 4200 mm : 2200 mm : 2550 mm : 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66T - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 96100 € : 1931.61 € : 80 to : 2550 mm : 4 : 320 mm : 2840 mm : 500 mm : servomotorischer Riemenan : 105 mm/s : 10 mm/s : 105 mm/s : 650 mm : 250 mm : 3700 mm : 2200 mm : 2550 mm : 6400 kg Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66T - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard ...

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Hydraulic press brake: Trumpf type TrumaBend V130, rb: 2000. Bending length: 3100 mm; Between columns: 2650 mm Stroke 250 mm; Pressure: 130 t CNC controlled press Delem DA65, color, language. Polish, 2D graphics. Controlled axes -Y1-Y2-X-R + CNC-controlled Wila table bend compensation + hydraulic clamping of upper and lower tools. CNC-controlled bending support. Pneumatic die advance. 6 fingers on the rear bumper. Machine weight 12 t. Drives 11.5 kW. Tool holder - Wila New Standard. A set of new bending tools along the length of the machine. Full original DTR, workplace health and safety instruction in Polish.

Demag Concept 300-630/2300 injection molding machine Year of production - 2006 Clamping force - 3000 kN Spacing between columns - 950 X 950 mm Table size - 630 x 630 mm screw diameter - 80 mm injection volume 1583 cc injection weight - 1430 g injection pressure - 1437 bar machine weight - 14,600 kg dimensions of the machine 6.5 x 1.9 x x 2.3 m number of man-hours worked 75299 Screw 80 mm hardened (good condition) RSP revised in 2022 2021 injection system has been completely sealed 2019 the pump along with the control valve and Hall sensor has been completely revised

Technical information Tray packing line (sorter + bagger) : - Vendee sorter concept Calibra T / Year 2017 - Ulma Florida flow-pack bagging machine / Year 2003 - Videojet marking system / Year 2016 - Automatic conveyor Vendée concept / Year 2018 The current format: Tray 500 gr (tray height 65mm width 110 and length 190) Second recorded format: Tray 250 gr (tray height 50mm, width 98 and length 140). Possible packaging 1 kg (tray height 108mm, width 125 and length 192). The automatic weighing unit can weigh products up to 3 kg. Changeover is done quickly by changing the computer parameters and changing 3 mechanical settings. Maximum capacity of the line is 65 units/minute with the use of the Vendée Concept weighing unit and 80 units/minute without the weighing unit. The flow pack packer in use alone can go up to 110 packed units/minute. Frabicant / bran ...

Automatic line for packaging products in shrink film Kallfass Compact 450. 1. Appointment. The line is designed for packaging products in shrink film. 2. Working principle. Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section. In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely ...

Webomatic Shrinking and Drying Line consisting of the Webomatic STCW 60/80-L-E Shrink Tunnel and the Webomatic DU 60-L Drying Tunnel. Webomatic STCW 60/80-L-E Shrink Tunnel: This shrink tunnel boasts unique design details, ensuring impeccable shrinking results along your production line. Specifications: Model: STCW 60/80-L-E Max. Product Dimensions: 550×300 mm Max. Product Weight: 70 kg Power: 3PH / 400V / 50Hz / 45kW Machine Dimensions (LxWxH): 1,253x886x1,442 mm Machine Weight: 500 kg Webomatic DU 60-L Drying Tunnel: The DU drying unit delicately dries shrink packs, prepping them seamlessly for subsequent stages like weighing, labeling, and cartoning. Specifications: Model: DU 60-L Max. Product Dimensions: 550×270 mm Max. Product Weight: 70 kg Drying Capacity: 11,100 m3/h Power: 3PH / 400V / 50Hz / 7kW Machine Dimensions (LxWxH): 1,600×1,253×1,442 mm Machine W ...

Intermittent motion film packaging machine with 3-sided sealing, the fully automatic packaging machine works with a film forming shoulder for three-sided product sealing. The beck forming shoulder principle ensures a brilliant packaging result and perfect sealing seams for a wide range of formats and materials. The packaging machine can be used both as a stand-alone solution and integrated into a packaging line.

Used Tetra Pak TBA 8 1000 ml Square 2001 The used Tetra Pak TBA 8 1000 ml Square filling machine is an essential part of this production line It was manufactured in 2001 and has been in operation for 2350 hours It runs on 110 V and is capable of efficiently filling a variety of containers In addition to the filling machine the line also includes an applicator TCA 88 TV which was produced in 2001 This applicator is responsible for ensuring that the containers are properly sealed and ready for the next step in the production process Alongside these two Tetra Pak machines the line also includes a TCP 70 which was manufactured in 2004 This machine has a running time of 300 hours and performs an important role in the production process All of these machines are working together to ensure that the final product is of the highest quality The conveyor which is 30 meters long is not part of the T ...

Description: The machine intended for precise processing of details has a high-quality steel construction, equipped with the best components. The metalworking process takes place on the 500 mm long and 380 mm wide work table of the milling center using a powerful 15 kW spindle, which guarantees excellent precision and significantly reduces milling time. The CNC milling machine has 5 axes (X,Y,Z,C,B) with displacements of 500 mm (X axis), 420 mm (Y axis), 380 mm (Z axis), 180° (C axis) and 360 ° (axis B). Along with the vertical machining center, a wide range of equipment is offered, consisting of, for example: a control panel with an installed HEIDENHAIN TNC 430 CNC control system, a spacious tool magazine and a detail probe. The total weight of the machine is 6000 kg. Technical data of the CNC milling center DECKEL MAHO DMU 50 EVOLUTION number of axles: 5 displacements in X/Y/Z ax ...

BYSTRONIC ByStar L 4025-65 6 kW laser cutting machine built in 2018 in Switzerland is designed for precision cutting of among others carbon steel, stainless steel and aluminium. The machine uses a stable 6 kW laser beam with a thickness of just a few μm to achieve excellent processing results in the form of extremely even and smooth edges along the entire length of the workpiece. The machining process takes place on a rigid work table with a length of 6500 mm and a width of 2500 mm, which ensures high stability even during the most demanding challenges. During its use, the BYSTRONIC ByStar L 4025 laser cutting machine has been continuously serviced and has original parts. The total weight of the machine is 28900 kg. Technical data of the BYSTRONIC ByStar L 4025-65 laser - laser beam power: 6 kW - work table dimensions (L x W): 6500 x 2500 mm - workpiece thickness range (plain stee ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

Used and refurbished turbine mill from Tecnoecology for the digestion of old cables, especially fine strands or computer cables. Balling takes place at about 3,000 rpm. The tools are rotatable and have 4 usable edges. The turbine mill can be operated stand-alone or integrated into an existing system without a pellet mill. The machine has a 20 kW drive and can process up to approx. 300 kg of material per hour.

Description: Max panel size 3050x800x50 mm Min panel size 300x90x10 mm Maximum speed of X-Y axes m/min 25 Vertical spindles n.7 (4X+3Y) Horizontal spindles along Y/X axis n.2 (1+1) 1 Blade, diameter/thickness mm 100/5 Motor power kW (hp) 1.5 (2) Spindle/blade rotation speed rpm 3350/4300 Installed power kVA 4.5 Approx. Onsite Dimension. (l x w x h): 1,950 x 1,650 x 1,150 mm, weight approx.: 2,500 kg

This DMG MORI LASERTEC 65 3D Hybrid 5-axis precision machine for milling and laser machining was manufactured in the year 2014 in Germany. It is special for the ability to produce components using 3D Printing and to post-process them at the same time. Ideal for manufacturers who need a high-performance additive manufacturing solution of metallic 3D components. The machine features a fixed integration of the laser head in the headstock for greater installation space and more performance. In addition it offers 5-axis material application via coaxial nozzle for uniform powder distribution regardless of the laser build-up direction. It is the ideal dedicated solution for prototypes, small series, repair and coating. This LASERTEC 65 3D is equipped with an integrated SK 40 motor spindle with spindle speed up to 14,000 1/min. In addition it operates with a fiber-guided diode laser of 2.5 kW l ...

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

Max. size of processed sheet (without interception) - 1,250 x 2,500 mm (without repositioning) - 1,250 x 5,000 mm (with interception) Processed sheet thickness 0.5 - 3.2 (6.4) mm Maximum sheet weight – 50 kg (F1 mode) - 150 kg (F4 mode) X-axis travel – 2,500 +/- 10 mm Y-axis travel – 1,270 +/- 10 mm Maximum travel speed: X axis - 100 m/min Y axis - 80 m/min Max. diagonal speed of movement along the X and Y axes - 128 m/min Max. rotation speed of the rotary (index) tool - 60 rpm Drives (motors) for feeds along the X-Y axes, Yaskawa (Japan) Accuracy when punching holes according to the Manufacturers test: Max. deviation of hole positions along the X and Y axes - +/- 0.1 mm Max. hole center distance deviation along the X and Y axes - ± 0.05 mm Max. angular deflection of rotary (index) tool, max. - ± 0.1 deg. Punching force - 200 kN ...

General SKU213T151 LocationBarneveld MakeAlbi Alois Binderberger No.426 Year of construction1977 Pressure Working pressure4 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Volume4000 Ltr. Pressure4 Bar Specified Features - Pressure vessel Capacity4000 Ltr. Manholecheck Max. temperature+80/-20 degr. C With jacketcheck Max. temperature+126/-20 degr. C MaterialStainless steel 1.4571 (316Ti) Information Floorspace1,5x1,5 m Total height2,9 m Weight1400 kgPressure vesselsAlbi Alois BinderbergerTanks > Pressure vesselsBrand > Albi Alois Binderberger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Automatic tray sealing machine, make Sealpack, type 5V/G, year 2015, Plant for sealing sealable trays with a on the tray, coordinated top film, Set up on an octagonal A-PET tray, for 125 and 175 g content (134 x 100 x 23/40mm) with an oval base and octagonal lid., without filler and without labeller, • Can be operated from both sides, standard operating side here from the right!, • including vacuum and gas equipment, • including vacuum sensor, real value display in mbar, • including MAPpIus gas supply system (first-class from 200 mbar vacuum, Gas values in the pack, product dependent), Machine made of corrosion-resistant materials such as VA and plastic,, very stable column construction, integrated VA control cabinet splash water, protected, swiveling control panel All-round operability, Menu navigation can be stored over several programs, All switching, driving and sealing funct ...

This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. Its equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us.

This creaming tank is a part of a production line for sterilised processed cheese spreads. They serve for controlled viscosity increase following the sterilisation process, in order to achieve optimum spreading characteristics. Max volume: 500 liter, effective volume: ± 400 liter. Scraper agitator that goes along the wall, 1,5 kW motor., Type of Machine: Creaming tank, Volume: 500 liter, Inside Diameter: 80 cm, Inside height: 100 cm, Agitator type: Scraping agitator that goes along the wall, Motor of agitator: 2,2 kW - 220/380 V - 50 Hz

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10 800 cph represents indeed a reliable and efficient solution for industrial bottling operations Equipped with specialized and high quality equipment this line is meticulously designed to maximize productivity and ensure in fact optimal results CFT Empty Can Twist Rinser Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans Moreover with its dual can rinser system and spare parts sets for 0 35L and 0 47L aluminum cans it ensures flexible operation tailored to specific production needs Additionally the rinse process guarantees pristine can surfaces vital for maintaining product integrity CFT 20 Valve Can Filler Seamer of the CFT Canning Line The 2013 model RS20 CFT 20 valve can filler with seamer ensures precise and rapid filling o ...

This OTINUS PBO 2312N Bending machines machine was manufactured in 2021. This equipment features the E21 control system with a backgauge along the X-axis and beam adjustment along the Y-axis. It operates with a nominal pressure of 1250 kN and can handle sheets up to 3200mm in length and 320mm in depth. It offers a working length of 3.2 meters and a pressing force of 120 tons. Contact us anytime for further information.

Description: Drilling capacity: 40 mm Face milling cutter: 100 mm End mill: 32 mm Projection: 275 mm Max. distance, spindle head to table: 445 mm Mounting cone of the spindle: MK 3 Spindle stroke: 130 mm Diameter, quill: 75 mm Spindle head rotation range: 2 x 90° Diameter of column dovetail guide Total height without base: 1150 mm Total length of the machine: 750 mm Total width of the machine: 1185 mm Machine base: 710 mm Spindle speeds 2-stage motor: 12 Spindle speed range: 50 - 2500 rpm Adjustment travel across the table: 240 mm Adjustment travel along the table: 510 mm Clamping surface of the table: 820 x 240 mm T-slot stone size: 16 mm With accessories as shown in the pictures, including a dividing head (diameter: approx. 300 mm), a shaping angle and various other tools for the milling machine With operating instructions as shown in the pictures Approx. Onsite Dimension. (l x w x h) ...

Description: Equipment: 3-axis digital display Digital depth display motor feed for X and Y Left / right run Emergency stop switch Pivot head swiveling Spindle protection. machine light Tool case with content Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle mount ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment across 375 mm Table adjustment along 175 mm Table clamping surface 1000 x 240 mm Max. Distance between worktable and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space required approx. 1.3 x 1.2 x 2.1 m Approx. Onsite Dimension. (l x w x h): 1,300 x 1,200 x 2,100 mm, weight approx.: 950 kg

Description: Drilling and milling machine with - Variable spindle speed - Digital depth display - Left / right switch - Cross Support - swivel spindle head - Feeds via hand crank - Tool case with content Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity end mill 13 mm Spindle mount MK 2 Spindle speeds 50 - 3000 rpm Table adjustment across 220 mm Table adjustment along 160 mm Table clamping surface 500 x 140 mm Connection voltage 230V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space required approx. 0.6 x 0.45 x 0.76 m Attention: machine is without digital display Approx. Onsite Dimension. (l x w x h): 600 x 450 x 760 mm, weight approx.: 60 kg

Used Can filler Uni Blend 72 and Seamer Angelus 120L up to 40000 cph Introduction of the Can filler Uni Blend and Seamer Angelus 120L In the highly competitive bottling industry companies rely on advanced machinery to streamline production Among available equipment the Filler Uni Blend 72 and Seamer Angelus 120L stand out Filler Crown Uni Blend 72 The Filler Crown Uni Blend 72 is crucial for high volume bottling Equipped with 72 ADCOR valves it ensures precise filling boasting a remarkable capacity of 40000 cans per hour Therefore it helps companies maintain a competitive edge Seamer Angelus 120L Complementing the Filler Uni Blend 72 is the Seamer Angelus 120L Renowned for precision and reliability it features 12 sealing heads each meticulously calibrated This level of sealing precision is crucial for preserving freshness and carbonation Consequently it enhances customer satisfaction and ...