We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,748 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are choiceable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.
used
with 30 filling valves 5stelligem natural corker 5stelligem aluminium screw capper for 28 mm standard caps Direction: left - right
used
Board thickness up to 5 mm, milling width: 3/4/5/6 mm is given by milling cutter. Suitable for card-, micro- and corrugated board. Cutting depth from 0 up to 1 mm adjust by excenter. Deep processing adjust by knurled skrew. Due to separate adjusting of milling depth and deep processing, is it possible to mill the varnish-, cellophane-, aluminium- and PE-coating in a 1/100 mm range. Suitable for any folder gluer.
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...
new
Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...
used
Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...
new
Turntable 1200 mm height-adjustable from 750-950 mm Capacity of the plate up to 60Kg. Trade show models - like new condition BJ. 2014 Frame made of aluminium - pages Vollverkleidet Speed adjustable You To find more information on request other machinery and accessories below: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &
new
Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to ...
used
Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...
new
Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request
used
appr. 40 m³ / 40,000 litres palm oil tank, steel tank, insulated, double-walled, heating coil on the inside, above ground storage container, on 2 bases manufacturer: Dehoust year of manufacture: 2007 volume: 40 m³ / 40,000 L DIN: 6616 D /6601 serial number: 17 / 07 322 leak indicator: control fluid control fluid volume: 320L diameter: ø2500 tested over-pressure: 2 bar tested over-pressure for the double wall: 0,6 bar insulation: mineral wool appr. 10-18 cm, coated with aluminium plates material: inner wall S235JR, outer wall S235JR suitable for fluids harmful to water and for both combustible and non-combustible fluids inner heating coil The container is in used condition, according to the age there are traces of use. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is ...
new
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC fraes machine is variable due to the adjustable working area (through lasshoehe under bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long freser ), whe ...
new
Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
Screw caper heads d 28 aluminium from SIMONAZZI filler
used
Label printer Sato S8408 Mounted on a aluminium frame, inclusive mounted spool for winding labels Very neat and recent printer
used
Artec mini table lathe C2x300 tips size 300 mm + 8 PCs chisel set Mini table lathe C 2 and 8 PCs. HSS cutters set now in the Westfalia savings Kit. C-2 the spindle speed variable from 200-2500 RPM via a potentiometer is adjustable at the mini lathe. About a 80 mm three-jaw chucks can be clamped workpieces easily. The workpieces can be supported with a tailstock with MK 2-recording. By a quad-steel holder the cutters can be secured, designed for 8 mm cutters. Also thread can be cut with this mini lathe 1.5 mm pitch. All materials with normal strength can be edited. (Aluminium brass steel). Technical data: centre height 90 mm centre distance 300 mm spindle bore 19 mm tailstock intake MK-2 thread cutting range 0.2 1.5 mm speed range 200-2500 U / min variable power 250 Watt/230 V Plan route 65 mm Oberweg sled 55 mm Quill trail 50 mm Dimensions Lxwxh approx. 700 ...
used
Drum mill for batch, iron-free grinding of minerals for the following industries: ceramics, chemistry, enamel, paints, recycling, etc. Including drive (11 kW via intermediate gearboxes and V-belts) and standing feet, mill inside lined with aluminium oxide tiles, drum dimensions: 1.5 m x 1.6 m . Maximum grinding material filling: 1,000 kg; incl. grinding balls.
used
A large number of conveyor belts, which are hardly used. The new price was approx. EUR 350 per meter! Manufacturer: Transnorm Length: 3 m 23 m Width: 500 / 600 / 800 mm Material: Aluminium price: 120 EUR per meter
used
Agitator 0.37 KW, 400V, 1340 RPM Coupling aluminium Agitator shaft d = 14 mm, L = 500 mm, stainless steel 1.4301 Stirrer stainless steel, with angle-adjustable angle leaves, d = 244 mm, angle blade width 50 mm, stainless steel 1.4301
new
Why produce the smallest parts on large, expensive CNC machining centers when it handles a small CNC machine for a fraction of the price just as quickly and massively ? On this machine, an unskilled worker can insert and unmount the factory quilts ! You can reduce your own costs from 250 Euros to 40 Euro Hourly Rate for Small Parts production and thus be much more competitive ! DIN ISO G-Code Programming or data output of the Fraesbahnen 2D or 3D directly from the software. You reduce your operating costs extremely. Also available with rotary axis ! Several companies produce extruder screws, 3D molded parts made of aluminium, small parts made of brass or stainless steel for injection moulding plants, etc. for your production. We would be happy to advise you on brass, copper, steel, stainless steel and many other materials can be processed. view informations and obtain non-bind ...
used
New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.
new
Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...
used
Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. ...
used
Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...
new
The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure ...
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...
new
Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race
used
The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our ...
used
Technical details: Plasma current source Messer Griesheim, Plasmette cutting range for steel up to 40 mm power at 80% ED - 120 A cutting medium Argon, Hydrogen, nitrogen cooling with fan + water cooling unit voltage at 230 volts = 54 A current voltage at 400 volts = 31 A input voltage 25 KVA machine weight approx. 0.3 t room requirement approx. 1.2 x 1.0 x 1.2 m The plasma cutting torch is used for cutting all electrically conductive metals, cutting power 8 or 8 13 KW, with cutting stroems 70 or 120 A. As plasma-forming gases argon, hydrogen and nitrogen are used. The use of nitrogen prevents beard formation and nitration in steel in some materials. Argon and nitrogen can be used to cut dull sheets and cut stainless steel and aluminium.; ready for use.
new
-Tischabmessung 800 x 380 mm -Formattisch 2000 x 270 mm -Besäumlänge 2000 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C / 45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1250 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 750 x 580 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzsägeblatt 8500 U/min -Vorritzsägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Abgabeleistung S1 100% 3,8 kW -Spannung 400 V -Maschinenabmessung (L x B x H) 2000 x 2800 x 1100 mm -Gewicht 310 kg komplett mit: -Aluminium-Formatschiebeschlitten mit gehärteten Führungsleisten -Stabiler Auslegertisch zum Bearbeiten von großen und schweren Platten -serienmäßig mit Tischverbreiterung und -verlängerung ausgestattet -Gehrungsanschlag und Niederhalter über die gesamte Schlittenlänge verschiebbar -S ...
new
-Tischabmessung 800 x 380 mm -Formattisch 2600 x 270 mm -Besäumlänge 2600 mm -Max. Sägeblattdurchmesser 315 x 30 mm -Max. Schnitthöhe 90C / 45C 100 / 80 mm -Schnittbreite am Parallelanschlag 1180 mm -Tischhöhe 850 mm -Tischverlängerung 500 x 310 mm -Tischverbreiterung 800 x 880 mm -Auslegertisch mit Rolle 830 x 520 mm -Drehzahl Hauptsägeblatt 4500 U/min -Drehzahl Vorritzsägeblatt 8500 U/min -Vorritzsägeblatt 2-100 x 20 mm -Absaugstutzendurchmesser 100 mm -Motor-Leistung S1 100% 3,8 kW -Spannung 400 V -Maschinenabmessung (L x B x H) 2600 x 2800 x 1100 mm -Gewicht 330 kg komplett mit: -Aluminium-Formatschiebeschlitten mit gehärteten Führungsleisten -Stabiler Auslegertisch zum Bearbeiten von großen und schweren Platten -serienmäßig mit Tischverbreiterung und -verlängerung ausgestattet -Gehrungsanschlag und Niederhalter über die gesamte Schlittenlänge verschiebbar -Stabile ...
used
CNC laser cutting machine Bystronic Bystar 3015 - Total power 125 KVA Co2 laser source Bylaser Power 5200 watts, CNC rotary axis for chuck 315 mm with counter bearing for pipe processing cutting power ST37 - approx. 25 mm stainless steel 1.4301 approx. 20 mm, aluminium approx. 12 mm cutting speed max. 50 m/min, positioning simultaneously max. 113m/min car. Loading device Byloader with sheet metal dusting device Only one-layer operation ! approx.27,500 power-on hours - approx. 6000 hours of laser hours; ready for immediate use
used
Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request
used
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
used
Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...
new
Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 1300 mm - Schnittstärke 0,5 - 8 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 60 A - Datenübertragung über Schnittstelle USB - Abmessungen 2000 x 1960 x 1470 mm - Gewicht 900 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von Bea ...
used
This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min
new
Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Schnittstärke 0,5 - 10 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 100 A - Datenübertragung über Schnittstelle USB - Abmessungen 3200 x 1960 x 1470 mm - Gewicht 1000 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von ...
used
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and Guide material: steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.100mm (1 x 800mm, 1x3900mm & 1x2400mm) Overall width incl. ...
used
Byspeed 3015 4400 W Bystronic 2006 Switching hours: 58800 h cutting hours: 27510 h Laser power: 4400 W Working range: 3000x1500 mm Maximum material thickness : Structural steel: 20 mm Stainless steel: 12 mm Aluminium:8 mm Machine weight: 21000 kg Lifter: Byloader 3015 : Plate size: 3000 x 1500 mm Sheet tray thickness: 0.8-25 mm Maximum sheet metal weight: 890 kg Documentation ; ready for immediate use
new
Technische Daten: - Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Schnittstärke 0,5 - 8 mm - Schnittgeschwindigkeit 0-8000 mm/min - Leistung 8,5 kW - Spannung 400 V/50 HZ - Plasma Leistung 60 A - Datenübertragung über Schnittstelle USB - Abmessungen 3200 x 1960 x 1470 mm - Gewicht 1000 kg Grundmaschine: Der Maschinengrundrahmen sowie der Fahrständer sind statisch und dynamisch steife Schweißkonstruktionen. Auf dem Maschinenrahmen ist der Fahrständer in Y-Richtung angeordnet. Am Fahrständer befindet sich der Quersupport, der in X-und Z-Richtung verfahrbar ist. Hardware / Steuerung: Die DSP Steuerung ermöglicht ein flexibles eingreifen in den Arbeitsablauf. Mit dieser DSP Steuerung können Sie Computerunabhängig Ihre G-Daten Dateien von der Fräsmaschine verarbeiten lassen. Software: inklusive Artcam Express Software Die ideale Software zum Erstellen von Be ...
used
Manufacturer: Diebels GbR recycling machines Cutting capacity: 30 ton Materials:-Aluminium (cylinder heads), brass (taps), copper, etc. Special features: work desk side folding Weight: 1100 kg Drive: 7,5 kw / 400 V Control: foot pedal
used
Properties Used belt conveyor of manufacturer TRANS standard Color: Silver Incl. SEW motor and guide ideal for fast material handling Expertly disassembled and packed Condition: fully operational Material: Aluminium 1 STK. in stock Year of manufacture: 2007 Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 7.180 mm overall width incl. motor: 700 mm Info ...
used
Used shrink capsule capper NORTAN, Type: UNICAP 35 Built-In: 2000 Suitable for capping of capsules in tinfoil, aluminium or thermo capsules. - complete equipped - with capsule supply table - feed in screw - format parts for 1 l and 0,75 l bottles available - Capacity : maximum 2.500 bottles/h - controlling for capper and heating shrink bowl installed Condition: very good, ready for operation. An inspection is possible at every time.
used
CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan ...
used
Mixing soft / empty suction valve from aluminium with plexiglass disc Diameter input / output: 38mm
used
with 32 filling valves, 8head crowner and 8head aluminium screw capper with Siemens S7 control capacity: approx. 8,000 bottles/h in 500 ml bottles
new
Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of ...
Qty. 1 Second-hand Powder coil coating line on aluminium strip 1500 mm wide Mfc.: TBA Built: 1991 Coating thickness: 60 microns Revamped by OTEFAL in 2003 Powder booth changed in 2011 – GEMA Coil coater for the pre-treatment changed in 2013 Degreasing section re-built in 2010 – OTEFAL Electrical device changed in 2006 Strip width: 800 - 1500 mm Strip thickness: 0.8 – 2.0 mm A wide range of colors - over 300 different shades Capacity: 9000 tons/year in 3 shifts work 5/7 Days so 2 000 000 m² Spool dia.: 508 or 610 mm Outside coil dia.: 1500 mm Average speed: 7.5 m/min.