aluminium used for sale

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 21478 Technical data: - Operation via handheld remote control with cable - Total load capacity approx. 2000 kg - Load capacity per table approx. 1000 kg - Platform made of aluminum with div threaded holes - Platform size approx. 2800 x 1800 mm - min. Lift table height approx. 280 mm - max. Lift table height approx. 1100 mm - Stroke approx. 820 mm - Hydr. drive 400 V / 1.1 kW each - Separate control cabinet - Separate hydraulic power unit with wall mounting rack - Space requirement approx. W 2850 x D 1850 x H 280 mm - Weight approx. 800 kg

approx. 2 pieces dock levellers, side-sliding truck dock leveller made of aluminium, Rite-Hite, Caema – used - : Price per piece ex location: only 695.-€ (net), incl. loading! Manufacturer: Rite-Hite, Caema Type: SKB 14/30421007 Year of Make: 2009 Load capacity: 4,000kg Weight: 128kg Width: approx. 1.50m Length: approx. 1,565mm Height difference: -215/+175mm Surface: Natural aluminium Guide rail: hot-dip galvanized, length 6,000mm, On-site ramp edging profile U-120 Condition: good Available: immediately Location: 6065 Thaur / Austria

Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 500 kg provides a stable and durable structure suitable for intensive use. Safety ...

Used Capping Machine BERTOLASO for Aluminium Screw Caps up to 9000 BPH The Bertolaso SIGMA 606 capping machine delivers reliable and high-performing results for aluminium cap applications. Specifically, this machine meets the needs of industrial bottling by ensuring efficiency and precision in the capping process. Moreover, its technical configuration makes it ideal for high-capacity production lines, reaching up to 9,000 bottles per hour. Main Technical Features of the Bertolaso SIGMA 606 The machine operates with six capping heads, which handle aluminium caps sized 28 x h 15 mm. As a result, this setup ensures that the machine applies uniform and secure closures, minimizing defects during production. The centrifugal cap feeder guarantees a continuous and steady flow of caps to the capping heads. Consequently, this system maintains consistent production speed, even under maximum load co ...

Aluminium profile, 23,7m, only € 25/m, 90x90 L B Type Groove 10 light, , used-Top Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Top condition: The profiles were removed from a new machine that was never in operation. Scope of delivery: 2 pieces 90x90x2900mm 12 pieces 90x90x1160mm 4 pieces 90x90x1000mm

Technical details Type: Electric motor terminal box components Configuration: - Cast aluminium terminal box housings - Terminal box covers - Junction box housings - Cable gland openings - Mounting flanges - Covers with moulded wiring diagrams - Various IEC motor frame sizes Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined mounting surfaces Estimated quantity: - Approx. 220–330 cast components Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per component Condition: New old stock (unused) Observed condition: - Clean castings with no visible corrosion - No impact damage observed - Machined surfaces appear in good condition - Never assembled - St ...

Technical details Type: Electric motor terminal box assemblies Configuration: - Die-cast aluminium terminal box housings - Matching terminal box covers - Threaded cable entry ports - Precision-machined mounting faces - Cover mounting holes - IEC motor terminal box design Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined interfaces Estimated quantity: - Terminal box housings: Approx. 12–15 pcs - Matching covers: Approx. 40–60 pcs - Several complete housing-cover assemblies - Additional loose spare covers included Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per housing Condition: New old stock (unused) Observed condition: - Clean machined su ...

Includes 1x cantilever rack equipped with 2x upright and 10x cantilever 232x120x292cm (welded construction), 2x cantilever trolley with aluminum profiles. Auction-ID: A1-48474-165

Including racking, mobile profile racking, storage bins, gitterboxes Auction-ID: A1-48474-158

Approximately 29 packages with length 600cm, part opened, part black lacquered, including 2x stacking yoke. Concerns content 1-side cantilever rack. Auction-ID: A1-48474-404

Approximately 19 packages with a length of 600cm, including 1x stacking yoke, part opened. Concerns content 1-side cantilever rack. Auction-ID: A1-48474-402

Approximately 14 packages with a length of 6000 mm, including 1x stacking yoke, various metal profiles. Concerns content 1-side cantilever rack. Auction-ID: A1-48474-430

Approximately 15 packages with length 600cm, part opened, part black lacquered. Concerns content 1-side cantilever rack. Auction-ID: A1-48474-403

According to photos, weight approx. 200kg estimated, including transport trolley Auction-ID: A1-48554-145

According to photos, weight approx. 200kg estimated, including transport trolley Auction-ID: A1-48554-146

Set of metal raw material including a large solid cylindrical block as well as several rectangular blocks and blocks in aluminum or light alloy. Set suitable for machining, manufacturing mechanical parts, maintenance or building up a stock of materials. Content included according to photos. Auction-ID: A1-48554-511

90 rolls of aluminum welding wire (MIG, 0.8/1.0mm) incl. steel tray Auction-ID: A1-48529-263

Various models. Auction-ID: A1-49018-409

New unbraked double-axle trailer with haulm nets from BW Trailers / dimensions 300x130x100 / comes with certificate of conformity and 2 years warranty / hot-dip galvanized chassis / alko axles / galvanized haulm net Auction-ID: A3-46145-6485

Approximately 25 packages with length 600cm, including 5x stacking yoke, part opened. Concerns content 1-side cantilever rack. Auction-ID: A1-48474-401

Underfloor aluminium circular saw - Hydropneumatic semi-automatic - Pneum. Workpiece clamping device - Roller conveyor with material stop, Length 3m - Feed roller conveyor, Length 3m Machine color is blue Saw blade diameter 450 mm Cutting range at 90 degrees: around 130 mm Cutting range at 45 degrees: around 100 mm Cutting area at 90 degrees: flat 210 x 170 mm Cutting area at 45 degrees: square 145 x 170 mm Speed 2900 rpm Total power requirement 2.3 kW Machine weight approx. 600 kg Dimensions L x W x H 4.0 x 1.5 x 1.5 m Condition: never used / new (5) Auction-ID: A7-49782-412

Technical details Type: Electric motor terminal box housings Configuration: - Cast aluminium terminal box bodies - Machined cable entry ports - Threaded cable gland openings - Precision-machined mounting faces - Integrated mounting bosses - Multiple IEC motor frame sizes Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined interfaces Estimated quantity: - Large box: Approx. 24–28 pcs - Second large box: Approx. 8–10 pcs - Upper carton: Approx. 4 pcs - Lower carton: Approx. 3 pcs - Total estimated quantity: Approx. 39–45 housings Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 1.8 kg per housing Condition: New old stock (unused) Observed condition:  ...

Length of aluminum profiles 600cm, batch of steel profiles L 600cm on and including 4x stacking yoke and dolly Auction-ID: A1-48474-417

Manual underfloor aluminium circular saw Saw blade diameter 400 mm Cutting range at 90 degrees: around 120 mm Speed 1400 / 2800 rpm Motor power 4.0 kW Machine weight approx. 180 kg Dimensions L x W x H 1.0 x 0.9 x 1.2 m Auction-ID: A7-49782-419

Technical details Type: Electric motor stator assemblies Configuration: - Aluminium finned motor housings - Wound copper stators - Laminated steel stator cores - Terminal box assemblies - IEC motor frame construction Application: - Industrial electric motors - OEM motor assembly - Spare parts inventory - Industrial machinery manufacturing Construction: - Cast aluminium housings - Copper windings - Laminated electrical steel cores Estimated quantity: - Assembled stator units: Approx. 35–50 pcs - Smaller wound stators: Approx. 10–20 pcs - Additional empty housings and components included Dimensions (typical unit): - Length: Approx. 450 mm - Width: Approx. 350 mm - Height: Approx. 350 mm Weight: Approx. 20 kg per unit Condition: New old stock (unused) Observed condition: - Factory-assembled stator units - Copper windings clean and intact - Indoor-stored in ...

Technical details Type: Electric motor stator assemblies Configuration: - Factory-wound copper stators - Cast aluminium finned motor housings - Laminated steel stator cores - IEC 132M motor frame - 4-pole design Application: - Three-phase AC induction motors - Industrial electric motor assembly - OEM motor production - Spare parts inventory Construction: - Cast aluminium housings - Copper windings with insulated lacing - Laminated electrical steel cores Model designation: T132MB4 NT Estimated quantity: Approx. 8–12 units Dimensions (per unit): - Length: Approx. 240 mm - Width: Approx. 240 mm - Height: Approx. 300 mm Weight: Approx. 18 kg per unit Condition: New old stock (unused) Observed condition: - Factory-wound stators installed in housings - Copper windings clean and intact - No visible corrosion or mechanical damage - Fresh winding lacing and clean c ...