aluminium used for sale

x-travel: 400 mm y-travel: 220 mm z-travel: 400 mm spindle taper: ISO 40 spindle turning speed range: 25 - 2500 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 2 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 700 x 330 mm Taper: diverse Bellows with slats of aluminium: Protection cabin: bottom tray: Machinefeets: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carriage length: 3200 mm; Cutting width at width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 200 mm; Pre-scorer: yes; Height adjustment of saw blade: motorized; Swivel adjustment of saw blade: motorized; Adjustment of width stop: manual; Display saw blade angle: digital; Display cutting height: digital; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 550mm; Speeds: 3000 / 4000 / 5000 rpm; Engine power: 7.5 kW; Engine braking: yes / automatic; Suction connection: 100mm and 120mm; Machine length: 3600mm; Machine width: 2000mm; Weight: 1000kg; Stable steel-cast iron construction Large contact surfaces due to standard table extension and widening cast iron saw table Fold-down rip fence with fine adjustment and round rod guide cut-to-length fence, extendable up to 3200 mm, with two folding stops Laterally ...

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

- Self-supporting, firmly welded, torsion-resistant saw frame with hardened guides - TRK2 Automatically evasive aluminium slatted frame with plastic pads - 17-fold roller support with 3 brake pedals - 5.15 m long, split center support - Stable, durable saw bar construction - Powerful, powerful engine - Supersilent system to dampen engine noise - Electromagnetic motor brake - Cutting area 5300 x 2240 x 80 mm Incl. small parts support made of wood over the entire length of the machine and set for free-standing assembly

Pressure gauge GAUGE BEIERFELD 0 - 25 kp/cm² ( 0 - 25 bar ) Scale: 25 Mp Accuracy class: 1,,6 Pitch: 0.5 Case diameter: Ø 160 mm Connection thread: M20 x 1.5 Material: Brass, Housing: Aluminium New ! Dimensions: 197 x 160 x 56 mm

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...

Powerful double mitre saw, ideal for mass cuts of plastic and aluminium profiles at 90° or 45°. Saw blade diameter 550 mm, 4,500 mm length, and 1-axis control E 590/1. Proven elumatec principle of "sawing from below" for optimum accessibility and the best possible use of the saw blade. - Minimized calculation effort thanks to external dimension cut. - Pneumatic angle positioning 90° or 45". - Protective shields with automatic lowering over the sawing areas. - Standard with suction nozzle at the top and bottom. - Steel machine bed in post-and-beam construction. PC control E 590/1: - Industrial PC 1-axis control E590/1 for the cutting length (X-axis) - Drive-independent absolute measuring system - Pneumatic locking in position - Robust, low-wear direct drive of the mobile sawing unit - Ergonomic arrangement of the control unit - Positioning accuracy +/-0.1 mm pe ...

Machine Trepko XPG 40 Capacity up to 80 packets/min Pack size 250 gram and 125 grams Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘: Good Refurbished 5 years ago IN STOCK NOW

Linear guide carriage with linear guide rail, 2 pieces PAGUS LS15 travel: 68 mm Table: 77 x 47 mm Linear guide rail: 15.5 x 19 mm, Length: 146 mm Material: Aluminium, Running surfaces: Steel used, tested ! Dimensions ( single ): 153 x 47 x 24 mm Dimensions ( packaging ): 160 x 50 x 50 mm

Clamp of 50 pieces PAGUS B34 ALU Clamping range: 28 - 34 mm Material: Aluminium Other quantities on request ! New ! Dimensions ( Clamp ): 83 x 40 x 37 mm

Lightbox, one-sided HINRICHS FOTOFACTORY 500 x 500 mm ( 500x500mm ) max. film size: 480 x 480 mm 230 V AC 50 Hz 32 W used, aluminium housing, tested ! Dimensions: 500 x 85 x 500 mm

Three-phase electric motor LEROY SOMER 0.25 kW 1500 rpm 220 / 380 V shaft diameter: Ø 14 mm aluminium housing New ! Dimensions: 215 x 185 x 160 mm

Socket, wall socket, switch socket with fuses SLF, MARINE FITTINGS AND LUMINAIRES CONSTRUCTION FINOW LFDSP 16 TGL 20457 380 V AC 16 A 3P + PE and neutral conductor IP43 Aluminium housing ! can be switched off and locked ! New ! Dimensions: 260 x 180 x 125 mm

axial fan ZIEHL-ABEGG series FB 4-bladed aluminium sheet blade diameter: 497 mm voltage: 400V frequency: 50 Hz rating:: IP 54 Dimensions: 590 x 590 x 225

Socket, wall socket, switch socket with fuses ELECTRICAL SWITCHGEAR GRIMMA GNDSP 25 TGL 12467 TGL 20457 220 / 380 V AC 25 A 3P + PE IP43 Aluminium housing ! can be switched off and locked ! New ! Dimensions: 330 x 185 x 140mm

roof fan, axial fan, axial blower, axial fan, supply air mode, horizontal suction S&P, SOLER & PALAU HCTT/4-500A Product no.: 5113441900 Fan diameter diameter: Ø 500 mm motor: 0,, 85 / 0.5 kW 1350 / 1060 rpm 400 V 3AC 50 Hz IP65 thermoplastic impeller, glass-fibre reinforced plastic hood made of aluminium, seawater-resistant, Ø 900 mm base plate and channel box made of sheet steel, galvanised channel box: 690 x 690 x 310 mm, flange: 875 x 875 mm approx. 3.5 m connection cable with 5-pin CEE plug used, tested ! Dimensions: 900 x 900 x 680 mm

Socket, wall socket, switch socket with fuses ELECTRICAL SWITCHGEAR GRIMMA GNDSP 40 TGL 12467 TGL 20457 220 / 380 V AC 40 A 3P + PE IP43 Aluminium housing ! can be switched off and locked !; New ! Dimensions: 330 x 185 x 140mm

Detector, Push button detector, Fire alarm, Fire detector TESLA MHA 101 V.C. ( MHA101VC ) IP65 Aluminium housing with signal light 24 V 1.5 W without pane ! New ! Dimensions: 165 x 130 x 80 mm

Plug and socket, wall socket, switch socket with fuses ELECTRICAL SWITCHGEAR GRIMMA GNDSP 63 ( GNDSP63 ) TGL 12467 TGL 20457 220 / 380 V AC 63 A 3P + PE IP43 Aluminium housing ! used, checked ! Dimensions: 4500 x 220 x 170mm

Edge protector for lifting straps, rope guide PAGUS 13 x 80 / 130 mm 8 x 45 / 70 mm 5 x 25 / 60 mm Aluminium used, tested ! Dimensions: 400 x 300 x 300 mm

Rasselwecker, Klingel, Läutewerk RFT, FERNMELDEWERK LEIPZIG PAW 23 Hz ex ( PAW23Hzex ) EL 138 16 760 Glocken Shell: Ø 150mm 60 V AC 20 W IP54 Aluminium housing unused, explosion-proof ! Dimensions: 300 x 200 x 110mm

Power strip, 7 sockets, 2 pieces RITTAL DK 7240.210 ( DK7240.210 ) Art.-No. 7240.210 250 V AC 16 A Material: aluminium profile, natural anodised approx. 2.0 m connection cable with ferrules New ! Dimensions( power strip without cable ): 420 x 45 x 45 mm Dimensions( packaging ): 550 x 95 x 130 mm

Rotary encoders, rotary encoders, pulse generators, encoders, with centrifugal switch BAUMER BHB 05.05A1024-22-5 ( BHB05.05A1024-22-5 ) hollow shaft: Ø 30 mm, depth: 10 mm flange: Ø 144 mm approx. 0.3 m connection cable housing: Ø 100 x 45 mm Material: Aluminium used, tested ! Dimensions: 135 x 120 x 76 mm

Limit contact for bypass knives NBK-RT KOBOLD NBK-RT200 Medium temperature: max. 200 °C Switching capacity: max. 250 V AC, 1 A, 80 VA Contact function: bistable changeover contact housing: aluminium pressure housing, terminal connection New, with documents ! Dimensions: 140 x 85 x 42 mm

Power distribution strip, power strip, for installation in 19-rack 1U EATON FlexPDU 8 DIN item number: 3400794300 max. 3650 VA 250 V AC 50 / 60 Hz 16 A 8x Schuko socket (type F, CEE 7/4) Material: aluminium profile, natural anodised approx. 2,0 m connection cable New ! Dimensions ( power strip, without cable ): 483 x 44 x 80 mm Dimensions ( packaging ): 500 x 100 x 100 mm

Grommet housing, 10 pieces HARTING Han 10B-gg-R-M32 19300100447 size: 10 B, high design for longitudinal brackets cable input: 1x M32 ( straight ) Material ( housing ): die-cast aluminium ( powder-coated ) Protection class: IP65, IP66, IP67 New ! Dimensions ( grommet housing): 92 x 72 x 45 mm Dimensions ( packaging ): 390 x 140 x 120 mm

Profile rail for ET 200M SIEMENS SIMATIC DP 6ES7 195-1GG30-0XA0 ( 6ES7195-1GG30-0XA0 ) Length: 620 mm Material: Aluminium IP65 New ! Dimensions ( profile rail ): 620 x 122.5 x 46.5 mm Dimensions ( packaging ): 625 x 130 x 55 mm

Ionizer cell, electrostatic filter LTA 465 x 440 x 80 1371947 11 - 12 kV Frame: Aluminium New ! Dimensions: 465 x 440 x 90

LED task light, LED system light LED2WORK GmbH UNILED SL 100 110914-13 Material ( housing ): Aluminium Material ( cover ): plastic, matte profile ( height x width ): 35 x 85 mm length: 1045 / 1075 mm 48 W 24 V DC IP50 with lamp holder ( joint bracket ) used, tested ! Dimensions: 1100 x 85 x 75 mm

LED task light, LED system light LED2WORK GmbH UNILED SL 100 110914-14 Material ( housing ): Aluminium Material ( cover ): plastic, matte profile ( height x width ): 35 x 85 mm Length: 1545 / 1575 mm 72 W 24 V DC IP50 with lamp holder ( joint bracket ) used, tested ! Dimensions: 1600 x 85 x 75 mm

Series limit switch, mechanical series position switch WMW 8x C8 8x changeover switch ( micro button ) 250 V AC 4 A Aluminium housing New ! Dimensions ( without cable entry ): 195 x 70 x 80 mm

Wall mounting, mounting bracket SICK PLS101 Material: Aluminium Accessories for EL981 ! used ! Dimensions: 220 x 180 x 70 mm

CEE actuation attachment, push button, 9 pieces BARTEC Type 03 Push button Type 03-5415-0107 Material ( front ring ): aluminium, polished for panel mounting: Ø 30 mm with 6 different key signs explosion-proof New ! Dimensions ( push button ): Ø 38 x 34 mm

table length: 3000 mm table width: 1500 mm total power requirement: 51 kW burner heads: weight of the machine ca.: t dimensions of the machine ca.: m with changing table (without automtic storage) ByVision Touchscreen and manual control unit Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with Mo ...

CEE actuating attachment, light module, 8 pieces BARTEC Type 03 Light module attachment Material (front ring): aluminium, polished Lens colour: clear Lens design: flat ( Ø 28 x 5 mm ) for panel mounting: Ø 30 mm without bulbs explosion-proof ! New ! dimensions ( light module ): Ø 38 x 40 mm

Schaltkasten SIEMENS 296 x 226 x 110 mm u.a. for PNB40 S30122-K5644-X100-2 / RBS S31043-K1400-X1-15 2 Chambers: 218 x 142 x 90 mm Material: Aluminium New ! Dimensions: 320 x 267 x 120 mm

Only one previous owner, they only made aluminium parts on this Mazak! Longitudinal travel X-axe: 510 mm Crosstravel Y -axe: 510 mm Travel Z-axe (Height): 460 mm Dimensions clamping space - table: pallet 500 x 400 mm Max Height of workpiece: 405 Power on spindle: 12 kW Admission in millingheadspindle (ISO): BT40 Max speedrange: 12 000 rpm Control: Mazatrol 640M Weight: 11,5 ton

Ceiling lamp, wall lamp BERGNER & WEISER 8108 PL 1x 13 W 230 V AC 50 Hz Illuminant: PL-C 13W Socket: G24 Lamp glass: Ø 210 x 90 mm Ballast: ABB 13 / 230 / 50 without bulb ! Material: cast aluminium, glass used, tested ! Dimensions ( luminaire ): 335 x 335 x 110 mm Dimensions ( packaging ): 650 x 650 x 105 mm

TDS - Cable gland, cable gland, 70 pieces HTS TDS.13.M 2-1106001-9 Cable diameter: 8.5 - 15 mm spanner width: 24 mm thread: PG13.5 with anti-bending trumpet and strain relief Material: Aluminium - die-cast Other quantities on request ! New ! dimensions ( cable gland ): 32 x 30 x 30 mm Dimensions ( packaging ): 215 x 150 x 95 mm

MKP capacitor, capacitor, 4 pieces ARCOTRONICS C.; 87.0EFS Capacitance: 60 μF Nominal voltage: 450 V AC 50 Hz in aluminium housing with cap, lateral cable design and ground screw fastening screw: M8 x 1.25, length: 10 mm approx. 1.0 m connection cable Other quantities on request ! New ! Dimensions ( Single capacitor without cable ): 165 x 45 x 45 mm

Detector, push-button detector, fire alarm, fire detector, with light signal RFT MGM 1 S ( MGM1S ) Key number: EL. 13816715 IP55 Aluminium housing New ! Dimensions: 200 x 155 x 82 mm

Inclined conveyor belt on aluminium profile - MB Conveyors N-CPR (2 pcs.) Year of construction: 2011 Location: Lodz, Poland The inclined conveyor belt on aluminum profile, with regulation of height and angle of inclination Length of the inclined strap 200 cm, length of the horizontal strap 70 cm, width of the strap 44.5 cm Carriers with a height of 3.5 cm every 39 cm Height of the conveyor belt housing: 5 cm All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Clamp of iron, 100 pieces OBO BETTERMANN 2056/N ALU Article number: 1183 656 Clamping range: 28 - 34 mm Material: aluminium, plastic pressure tray Other quantities on request ! New ! Dimensions ( Bracket clamp ): 80 x 40 x 34 mm Dimensions ( Packaging ): 375 x 240 x 135 mm

Sheet metal support made of aluminium square tube

Assortment of bracket clamps, 29 pieces PAGUS 2 x B26 ALU, clamping range: 20 - 26 mm 16 x B30 ALU, clamping range: 24 - 30 mm 10 x B34 ALU, clamping range: 28 - 34 mm 1 x B38 ALU, clamping range: 32 - 38 mm Material: Aluminium Other quantities on request ! New ! Dimensions ( B26 ALU ): 60 x 31 x 25 mm Dimensions ( B30 ALU ): 68 x 36 x 24 mm Dimensions ( B34 ALU ): 83 x 40 x 37 mm Dimensions ( B38 ALU ): 88 x 44 x 37 mm

CEE command generator, control and signalling device FANAL EX - AL10 ( EX-AL10 ) 1 x key switch 1 x indicator light explosion-proof, aluminium housing ! New ! Dimensions: 180 x 90 x 130 mm

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm spindle taper: ISO 40 spindle turning speed range: 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1200 mm/min creep feed: 4 mm/min control: Heidenhain TNC 113 total power requirement: 1,6/2 kW weight of the machine ca.: 570 kg dimensions of the machine ca.: 1,2 x 1 x 1,75 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Switch gear cabinet ( separate ): Angle table ( fixed ): 600 x 210 mm Taper: Opposite bearing for horizontal milling unit: Bellows with slats of aluminium: with active digital display Heidenhain TNC 113, for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software ...

Three-phase electric motor VEM, ELMO type 1260.1/1 0,06 kW 1400 rpm 220 / 380 V 50/ 60 Hz IP 44 Shaft diameter: Ø 9 mm Shaft length: 20 mm Flange diameter: Ø 50 / 82 mm bolt circle diameter: Ø 14.5 mm hole diameter: Ø 65 mm 4x threaded hole: M5 x 0.8, depth: 20 mm new , aluminium housing ! Dimensions: 165 x 105 x 130 mm

Three-phase electric motor TH. ZÜRRER PFV 45/4 ( PFV45/4 ) 0,045 kW 1250 rpm 220 / 380 V shaft diameter: Ø 8 mm aluminium housing used, tested ! Dimensions: 195 x 115 x 95 mm

TECHNICAL DATA "Vacuum Dryer": Capacity: approx. 4/5 m³ Dimensions: 4000 x 1500 mm Vacutronic PLC control Pushing trolley Water Operation EQUIPMENT: 22 aluminium plates 3500 x 1100 x 15 mm