132,110 used machines on RESALE, but how to find them? Machine Search
General SKUCX003 MakeBHS Werk Sonthofen Maschinen- und Anlagenbau GmbH LocationBarneveld TypeFEST A9 -UNI Main Features MaterialStainless steel Motor15 KW Surface2.16 m2 Specified Features - Rotating vacuum filter MaterialStainless steel 1.4571 (316Ti) Rotating vacuum filtercheck Rotary pressure filter Filter surface2.16 m² Drum sizesDia. 800x1800 mm Motor15 kW, 690/400 volt, (EExdellCT4) With variable speed drivecheck Drum speed300-1500-1800 rpm Information No.300263 Year of construction1994 Floorspace2,80x1,90 m Total height2,30 m Weight±7600 kgRotating vacuum filtersBHS SonthofenFilters > Rotating vacuum filtersBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...
General SKU050G197 LocationBarneveld MakeMachinefabriek Heesen N.V. Boxtel TypeMonoroll Main Features Motor5.5 KW Inlet diameter175 mm Width40 mm Specified Features - Roll compactor Granulatorcheck Roll sizesø 130 mm Ring dieø 175 x 40 mm Number of dies available:1 Die perforationø 4 mm Number of press rolls1 (500 rpm) Motor5,5 kW(380 V, 1440 rpm) Inletø 150mm Outlet175 x 175mm Information Year of constructionunknown Mounted on wheelscheck Floorspace1,3 x 0,6 m Total height1,4 m Weight450 kg Extra SpecificationsWith stainless steel ring dieRoll compactorsHeesen BoxtelCompactors > Roll compactorsBrand > Heesen Boxtel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...
Manufacturer: Presstec Model: Dimension Excel Year of Manufacture: 2005 Type of Machine : CTP Computer-to-Plate Setter Operating Hours: 23.693 Plates Included: - PAT Extraction Unit UF-02 / UF-270 A - Control Computer - Harlequin RIP Software Condition: Used Find more here - / Contact us at -
- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station
2x pieces of Unused Endress+Hauser PMP75 Pressure Transmitters., Order code: PMP75-3EX77/0, MWP 0.1/10 bar, p -1 ...10 bar, Mat. 1.4435/316L, Will be sold as a set only., Type of Machine: Pressure Transmitter
Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge
Alteco 1000 Liter tank Pressure vessel 11 bar
Atlas-Copco 1500 liter tank pressure vessel
Krones Pressant Universal Year of Make: 2020 Neuglass Pusher Output: Operates at 45,000 bph
Pneumatic press, pneumatic punch, multifunction punch, punch, universal punch, punching machine -for window construction: tools -pneumatic: with foot control -with various tools: -pneumatic: operated -Air pressure: 8 bar -Pressure force: about 3.2 ton. -Stroke max.: 20 mm -Dimensions between stands: 250 x 200 mm -Dimensions: 505/510/H1360 mm -Weight: 90kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.
Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg
Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm
Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg
Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg
General SKU011U240 MakeHanag AG Oberwil No.111094 Year of construction1995 LocationBarneveld Pressure Working pressure16 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3560 Ltr. Pressure16 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Capacity3560 Ltr Vessel sizesdia. 1200x2600mm Dished topcheck Top connections4x dia. 80mm Outlet2x dia. 80mm + dia. 100mm + dia. 200mm Max. temperature-30/+120 Degr. C. Half coil jacketed(80 Ltr) Information Weight1900 KGDiscountPressure vesselsHanag OberwilDiscountTanks > Pressure vesselsBrand > Hanag Oberwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...
General SKU011U177 MakePaul Schwingel No.8183-3 Year of construction1986 LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume23120 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity23.120 l Vessel sizesdia. 2400 x 4000mm Dished topcheck Dished bottomcheck Manholedia. 600mm Top connections6x dia. 100mm + 2x dia. 150mm Outletdia. 150mm + dia. 100mm Max. temperature65 °C Information Floorspace2,8 x 2,8 m Total height5,5 m Weight4800 kgDiscountPressure vesselsPaul SchwingelDiscountTanks > Pressure vesselsBrand > Paul Schwingel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...
General SKU082C465 MakeEisen- und Hüttenwerke Thale AG No.60 6731 Year of construction1996 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2350 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2350 Ltr Vessel sizesdia. 1400x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(5x) Outletdia. 80mm Max. temperature200 Degr. C. With jacket(300 Ltr) Information Floorspace1,6x1,6 M Total height2,5 M -- VESSEL HAS NEVER BEEN USED -- Weight2150 KGDiscountPressure vesselsThaleDiscountTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...
General SKU065Y550 MakeFIB Leeuwarden No.1326-05 Year of construction1982 LocationBarneveld Pressure Working pressure5 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1200 Ltr. Pressure5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4401 (316) Capacity1200 Ltr Vessel sizesdia. 1000x1100mm Dished topcheck Dished bottomcheck Manhole/hand hole dia. 200mm Top connections4x dia. 25mm + dia. 65mm Outletdia. 80mm Max. temperature100 Degr. C. With paddle stirrermake Veenstra, type FR-200 Motor2,0 KW, 220/380 Volt (Ex) With variable speed drivecheck Information Floorspace1,5x1,5 M Total height3,3 M ATEX compatiblecheckDiscountPressure vesselsFib LeeuwardenDiscountTanks > Pressure vesselsBrand > Fib Leeuwarden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...
Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ã400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine.
General SKU328X701 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.6040 Year of construction2007 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...
General SKU328X703 LocationBarneveld CEcheck Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information MakeGeiger Maschinebau AG TypeD-1200-K Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU328X699 LocationBarneveld CEcheck MakeGeiger Maschinebau AG Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information Type1200-HSK Year of constructionD-1200-K/3SWFK Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...
General SKU328X702 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3Sw Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver MaterialMild steel With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck Information No.5480 Year of construction1995 Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...
General SKU328X700 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Dissolvers Capacity3900 l/h Information No.6163 Year of construction2011 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
General SKU328X698 LocationBarneveld CEcheck MakeGeiger Maschinebau AG TypeD-1200xHSK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel Information No.5235 Year of construction1990 Total height5,0 m Extra Specificationscapacity: :3900 l/h chain hoist, load cap. 3 ton. hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar squeezing press comes with 2 pans DissolversGeigerMixers > DissolversBrand > Geiger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for m ...
CONTROLS NC controls SIEMENS S7 TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
Year: 2017 - technically efficient, ready to work – after full service - split heads - pneumatic drive - maximum profile height: 160 mm - resistance unit lowered under the table - hydraulic lock for reversing the resistance unit
General SKU209W119 MakeHaagen & Rinau No.301015/4 Year of construction1998 LocationBarneveld Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume300 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4435 (316L) Notified bodyTÜV Capacity300 Ltr. ( bruto 380 ltr) Vessel sizesDia. 740x997 mm Dished topcheck Dished bottomcheck With covercheck Manholecheck DN400 Top connectionscheck OutletDN40 Max. temperature143°C Information Mounted on consolesOn wheels Floorspace0,95x1,15 m Total height2,0 m Weight360 kg Extra Specificationswith spray ball. inspection window in mannhole. SolventsDetergent & surf.CosmeticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsBiotechnology ...
General SKU004Y057 MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 LocationBarneveld Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be ...
General SKU001A039 MakeUHDE Hagen No.2578 Year of construction1978, Internal coil built in 1991 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor ReactorHigh pressure Capacity20 Ltr Vessel sizesdia. 215x600mm Dished bottomcheck Dished top sidecheck With jacket/Electric heating Internal heating spiral(0,8 Ltr) Max. temperature350 Degr. C. With anchor stirrercheck (built in 1991) Motor0,55 KW, 220/380 Volt (Ex) Speed mixing shaftvariable (± 155-1120 Rpm) Stainless Steel Reactors MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,9x0,9 m Total height2,2 m Weight850 kg Extra Specifications- Vessel does not have a bottom outlet Catalysts & fillersStainless Steel ReactorsSolventsDiscountDetergent & surf.Other pharmaceuti ...
General SKU232M159 MakeTop Industrie F-77 013 Vaux Le Penil Type1876 0000 Reactor cristallisation CO2 No.1449 Year of construction2007 Mounted on legsin framework Pressure Working pressure350 Bar Main Features MaterialStainless steel Volume0.1 Ltr. Motor0.25 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity0,094 Ltr Vessel sizesdia. 114x145mm With jacketcheck Max. temperature150°C Motor0,25 KW, 400 Volt Information LocationBarneveld With switchgearcheck Floorspace1,0x0,6M Total height1,0M Weight130 KGCatalysts & fillersStainless Steel ReactorsSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & polymersAgrochemicalsRubberOther chemicalFine chemicalsOintmentsGeneric medicinesPaints & coat ...
Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
According to description pdf attached complete line for profiles + WPC profiles
Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.
800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request
1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request
used
used
Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...
used
Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.
used
Qty. 1 Second-hand extrusion press Manufacturer: Loewy Type: 4 column floating - mandrel piercing press Aprox year of manufacture: 1939 Container size (dia.): 406 & 508 mm 16" and 20" Container size (length): 1350 mm Billet size (length): 1000 mm Nominal Extrusion Force: 5000 MT Nominal Piercing Force (Max): 740 MT Mandrel arresting Force floating mandrel Stroke Main ram: 2750 mm Piercer : 1200 mm
used
Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block
Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces
Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: SMS, Junker, Allen Bradley Force: 2500 MT Built: 1983 Modernised: 2017 Allen Bradley Ethernet Control System & NITROGEN DIE Cooling system Billet dia.: 8” Length: 450 – 950 mm Scope of supply: Log Loading Table Log Furnace Extrusion Press Run-out table Single Cable Puller Cooling Ventilator System Section Stretcher Storage Table Finishing Profile Saw Aging Furnace Die Heating Furnace Automatic Stacker Spare Parts
maximum number of results exceeded
please refine your search
