132,012 used machines on RESALE, but how to find them? Machine Search
used
REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,
Aluminium profile, connection profile, Einschiebeprofil 96 x 15 x 1000 mm New condition Price per piece: 6,00 348 STK. in stock
Year of construction: 1992-2007 PLC: Siemens S7 Blade 60-250 mm Power 1,5 KW Saw blade feed 0-20 mm / min Cutting speed: 30-170 m / min (steel) 800 - 2400 m/min (non-ferrous metals) Workspace square Max: 50 mm Work area round: 5-70 mm Supply length 5-1000 mm 5-9999 (multiple stroke) Nachschubgeschw. Max 500 mm / sec (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg (optional) Dimensions Lxwxh (saw) about: 2500 x 1000 x 2000mm (Magazine) about: 6500mm x 1500mm x 1300mm (optional) Footprint Lxw 2500 mm x 1000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 PLC control -Conversion on Siemens HMI Control Panel -Replacement of pneumatic feed or replacement of ball screws -Replacement of servo motor and servo inverters -Replace the inverter for the main drive of the saw - ...
Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...
Refurbished: 2018 PLC: Siemens S7 Saw blade 550 mm Engine power 11 KW Saw blade feed 0-3000 mm / min Cutting speed (SB 500 mm): 4500 m / min (SB 550 mm): 5100 m / min Square maximum work area: 170 x 170 mm Flat maximum work area: 380 x 75 mm Round maximum work area: 165 mm Supply length 10-1000 mm Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) about: 2800mm x 1600mm x 2200mm (Magazine) about: 3300 x 2200mm x 1800mm Footprint Lxw 6100 mm x 2200 mm The machine was overhauled 2014 in our House. Among others were renewed following points: -New PLC control -New Elgo positioning system -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Overhaul Menzel minimal lubrication system -Replacing common wear parts -Overhaul of t ...
PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...
Overhauled: 2018 Year of construction: 1994-2000 Blade 560 mm Engine power 6.5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100-4200 m / min Saw height control: electronic Square maximum work area: 170 x 170 mm Flat maximum work area: 300 x 150 mm Work area round max.: 200 mm Saw speed 0-40 mm / s adjustable Section length 5-950 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight approx. 1900 kg Dimensions Lxwxh 2200mm x2700mm x1950mm The machine is both technically and optically after completed retrofit in mint condition. The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The programmed HMI control system ensures easy and very profitable operation of the plant. The soundproof cabin this reduces the noise emissions to a minimum. The machine will be overhauled on request in our House. Amo ...
Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...
Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...
Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...
Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be ...
Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...
used
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD
used
Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace
43.5m aluminium profile at a sensational price €17/m excl., Nut 8mm, 40 x 80mm , used Special price! The current new price of a similar product would be € 38/m = total € 1,650. Take advantage of our one-off package price for 43.5m. If you have a VAT number, we will gladly issue an invoice without VAT. Used - Top condition The part was bought from a company in the course of a machine dismantling and is in very good condition. Scope of delivery: 3 x 221cm, 3 x 217cm, 9 x 200cm, 1 x 192cm, 2 x 184cm, 1 x 138cm, 1 x 129cm, 1 x 109cm, 1 x 105cm, 2 x 98cm, Attention: We also have a package of aluminium profiles 80 x 80mm and 40 x 40 mm. No warranty For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect cons ...
Qty. 1 Second-hand full automatic mat and shine anodising coating line Mfc.: CISART Built: 2013 Stopped: Capacity: 1,800,000 pieces of profiles per annum Maximum Part Length: 3 m Requested area: approx. 630 m² Operators: 4 - 6 Estimated Full Power Consumption: 960 kW +/- 10% Voltage: 415 V, 50 Hz, 3 ph. Heat Consumption Max.: 500,000 Kcal/H +/- 10 % Water Consumption: 3 m³/h Water Consumption (TAP) by Customer: 10 m³/h Air Consumption: 1 m³/h Heating System: Electricity & Gas Acid Recovery System: 3 kg/h CHILLER 400,000 + 160,000 kCal/hr 40 °C Max. Ext. Temp. Water cooling range: 9-14 °C 190 + 80 kW Dozing System Quantity: 8 Eye & Body Wash Quantity: 2 Qty. 49 Tanks, 3.5 x 1.1 x 3.0 m – L x W x H Weight: 10 ton each Tank made of 2,5 mm thick AISI304 sheets
Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,210 t dimensions: 0,9 x 1,4 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High-pressure tube fan made of aluminium, AD710mm, TDE 500 D4, Ruck, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. High-pressure tube fan, diagonal impeller ventilation fan, TDE 500 D4, Ruck, up to 9880m³/h, 3.3 KW, 400 V, do not operate without FIS! Aluminium design, AD 710mm, L730mm, incl. industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improve ...
New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm
New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm 60x40cm
End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175
1 Reimelt Zeppelin aluminium outer silo 2 chambers Silo stands on frame Capacity 80m³ Ø 3,000 mm Height approx. 15,000 mm Bulk density 0.8 t/m³ Price on request Phone +49 172 8345457
Geppert Band AM-F 7,30m x 0,30m with drive The plastic modular belt AM-F is characterized by its slim design. Thus, the width of the frame is only 14mm more than the chain. At the linkage it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly hard-wearing and easy to maintain by replacing individual links. Specifications: Year of construction: 2012 Length: 7,30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!
Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg
000 l container made of aluminium double jacket For sale from location With agitator Very good condition, straight from production!
Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)
MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5 ...
Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.
Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminium profile Complete plastic glazing 4 cm worktop with a light grey melamine resin direct coating 190 x 90 cm Dimensions of the workplace WxDxH 195x93x220 cm Magnifier Magnifying Lamp 8062D2 More items new and used - you can find them in our shop! International shipping costs on request!
6 Pieces Zeppelin Aluminum Outdoor Silos Ø 3,500 approx. 240 cbm capacity Bulk density 1.0 t/m³ Length complete: 28 meters per silo for sale. Price on request Phone 0172 8345457
horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Including angle profile and flat; lacquered; various sizes; Maximum length
Aluminum Silo Content Granules Height approx. 7,500 mm Ø 3,000 mm Inhlat approx. 35 cbm Bulk density 0.6 t/m³ for sale Phone 0172 8345457
maximum number of results exceeded
please refine your search
10 € 
