alu used for sale

DIMENSIONS: 4310 x 2032 x 660 MM & 4953 x 2032 x 660 MM,

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.

Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance perfect as a supplement to large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus all-plastic sheet. • Handle profile on all elements • Snap edge on the large elements • Element widths up to 90 cm Meva Alustar The lightweight AluStar universal formwork for the wall. Top wall formwork in terms of weight and performance, perfect as additional large-area formwork where no crane can reach. Best results in residential and commercial construction thanks to the Alkus solid plastic panel. • Handle profile on all elements • Knuckle edge on the large elements • Element widths up to 90 cm

Qty. 1 Second-hand billet homogenising furnace – still on foundation Mfc.: Pieco Servis Sp.zo.o. Built: 2004 Billet sizes: 7” & 8” x 7000 mm Material: Al alloys series 6060, 6063, 6061 Type of furnace: continuous furnace with a mechanical hearth Ingot size: Aluminum billets Ø 203 and 178; ingot length L = 7000 mm Type of heat treatment: Homegenising process Installed power: Heating: 955 kW Electrial: 50 kW Type of built-in burners: ThermJet Supply voltage: 400 V, 50 Hz Type of heating gas: GZ50 Gas pressure: 150 mbar Furnace performance: 1700 kg/hour 1000 Mg / 25 days (three-shift operation) Unit gas consumption: 27 m³/ Mg Furnace operating temp.: up to 600 °C

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

450 x NEW PRINTING PLATES ALUVA N 15 NEGATIVE PLATE (510 x 400 mm)

saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Large aluminium silo Volume: approx. 21.5 m³ Diameter: 3 m Total height: 4.77 m Height of feet: 2,20 m clear height outlet: 0.80 m Openings: Outlet 200 mm with manual slider Manhole 480 mm 2x inlet 150 mm Inlet 60 mm Inlet 100 mm Sight glass 100 mm

with 4 capping heads running direction: left - right automatic height adjustment frequency controlled Siemens control

temperature max.: 660 ° muffle size (length): 1000 muffle size (width): 1000 muffle size (depth): 1000 mm total power requirement: 9999 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 10 x 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Silo, flour silo storage silo, aluminum silo, storage silo used Volume: approx. 84 m³ Cylindrical height: approx. 12.0 m Year of construction: 1988 Diameter Ø: approx. 3.0 m total height: approx. 14.7 m Upper inlet: approx. manhole Ø 840 mm, inlet Ø 270 mm Outlet: approx. Ø 300 mm Weight approx. 3.3 t Material: Aluminum The silo was used as a storage silo (standing/hanging) in a mill. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Silo, flour silo storage silo, aluminum silo, storage silo used Volume: approx. 58 m³ Cylindrical height: approx. 12.0 m Diameter Ø: approx. 2.5 m total height: approx. 13.9 m Upper inlet: approx. 1 x Ø 270 mm, 1 x Ø 150 mm Outlet: approx. Ø 390 mm Weight approx. 2.3 t Material: Aluminum The silo was used as a storage silo (standing/hanging) in a mill. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brushing units separately adjustable; 1. Brush: Scotch Brite Medium/Diameter 220mm, Vario Drive; 2. Brush : Scotch Brite Hard / diameter 220mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with vario drive (infinitely adjustable); Engine power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

Escape sign luminaire, escape route luminaire, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11x lights available -Price: per piece -Weight: 1.9 kg/piece

System: 68/78/88 IV Number of tools: - St. Bore: 50 mm Window tools Oppold IV 68/78/88 wood Window tools Oppold IV 68/78 wood-aluminium ran on Weinig Unicontrol6 with fixed strokes ---------------------------------- (Technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

System: 68/78 IV Number of tools: - St. Bore: 50 mm Oertli window tools IV 68/78 wood IV 68/78 wood-aluminium been in use on Weinig Unicontrol 6 with CNC spindles You are welcome to receive the complete window sections and tool drawings Inquiry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

Equipped for ALU/PVC and ALU/ALU operation • Blister format range (W x L) min. 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Capacity 15 - 50 mould cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamps • Cover film Ø max. 240mm, core Ø 76 mm, pneumatic clamp • Glue joint detection for moulded and sealing film • Product feeder Uhlmann SimTab 2.1 for tablets/capsules • Feed according to moulds and seals • Print image control with cover film stretching • Crack and pore control moulding film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC molding film • Heating station with suction for the use of PVDC foil • Mechanical forming station for ALU moulded foil • Contents control VisioChrom color wit ...

Set up for ALU/PVC and ALU/ALU operation • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamped • Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped • Adhesive bonding point detection for sealing and forming film • Product feed by deticated feeder Uhlmann SimTab 2.1 for tablets/capsules • Forward feed after forming and sealing station • Tear and pore control for forme film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC forming film • Heating station with extraction for the use of PVDC film • Mechanical forming station for ALU forming film • Filling control VisioChrom color with separa ...

Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

bogie furnace 1x1x2m Temperature max 1200C PLC Data monitoring good quality Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gild ...

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

Universal blister machine in the medium to high-speed category. Suitable for processing tablets/coated tablets in corresponding blister for Alu/PVC, or Alu/Alu foils. Machine is fitted with a Simtap-feeding system. Output: up to 600 blisters/min. The blister machine is in line with the cartoning machine, type C2205.

• For PVC/PVDC-Alu • Output max. 50 forming cycles/min, max. 200 punching cycles/min, max. 600 blisters/min • Max. Format range (feed x width) 220 x 284 mm • Feed single cycle max. 222 mm • Feed rate multi-cycle max. 90 mm • Max. punching area lengthwise x crosswise 220 x 284 mm • Forming depth max. 12 mm • Automatic vibratory feeder 12-lane for oblong tablets/capsules • Uhlmann MC programme control • 1 tool set for oblong tablets/capsules • Drive 15kW/380V/50Hz Optional retrofit/overhaul/modernization: - PLC B + R X20 with Touch Panel PPC2100, new - Servo drives, new - Foil take-off by linear servo, new - Electric installation, new - Mechanically outdated - Pneumatics, new - Cooling, new - Protective coating, new - Varnish, new Further options: - Feeder: Brush box, directed feed e.g. SimTab or linear guidance - Format replacement acco ...

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

BLISTER LINE ROMACO NOACK (BLISTERING MACHINE + CARTONING MACHINE) Year of construction: 1998 Blister packing line consisting the following two machines, both electrically upgraded in 2020 with new PLC and HMI. Noack 920 blister packer: Maximum draw depth: 12 mm Maximum foil width: 160 mm Maximum capacity: 80 forming strokes per minute Blister collation system for feeding into the cartoner Automatic tablet track in-feed system Tablet feeders into brush box Suitable for packaging tablets or capsules into Alu/Alu or PVC/Alu blisters Variable speed Laetus vision system Vacuum system HAPA H-226-C printer Romaco Promatic P150 fully automatic horizontal intermittent cartoning machine: High production speed, format change without tools Carton dimensions: minimum: 20mm x 15mm x 60mm; maximum: 100mm x 85mm x 150mm Minimum carton dimensions: 20mm x 15mm x 60mm Ma ...

They offer for 1 post Plettac SL 70 with richly accessories original price net ?86.904,10 / gross ?103.415,87 when required subsets are also available - list see below the numbers of pieces can deviate approx. +/-10%, is subtracted after to actual numbers of pieces. article number text Amount of original price sum SLN57001 Alu-Durchstieg SL B64, 2.50 m, plywood layer, with Leit 16 268.00 ? 4,288.00 ? SLN50000 Alu-Durchstieg SL B64, 3.0 m, aluminium layer, with leader 2 325.00 ? 650.00 ? aluminium-vertical frames SL702000 SL B74, 2.00 m 38 105.00 ? 3,990.00 ? board board SNN14003 150 43 13.90 ? 597.70 ? board board SNN14002 200 46 14.70 ? 676.20 ? board board SNN14001 250 33 16.40 ? 541.20 ? board board SNN14000 300 18 17.50 ? 315.00 ? diagonal SNN60002 200x200 L=2,88m 70 23.50 ? 1,645.00 ? diagonal SNN60001 250x200 L=3,26m 88 25.50 ? 2,244.00 ? SNN60000 Diag ...

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a  ...

We offer a new, universal element slab formwork system EVODECK 205m², directly from the factory at great conditions, special net price 60.312,00€ Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 100 Element EVODECK 150x120 cm with PP formwork plate 8 Element EVODECK 150x75 cm with PP formwork board 8 Element EVODECK 120x75 cm with PP formwork board 60 Drop head EVODECK 90 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 6 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and discou ...

Pullers with puller trolley for 160cm deep oven NEWused puller trolley good condition stainless steel on casters with 12 pieces New ALU pullerstrolley External dimensions : W: 209cm D: 67cm H: 188cm12 pieces Pullers made of ALU Pullers for 160cm deep ovenPuller dimensions : W: 200cm D: 58cm Height : 4cm Do we have different size pullers in stockDetails see picture 

FILLING MACHINE FOR SUPPOSITORIES FARMO RES, MODEL FARMODUE FD 22/U Year of construction: 1996 Automatic machine for the production of suppositories and ovules in strips of aluminum and thermoformable plastic. The product is dosed in precise volumes in the dosing station and these volumes can be changed automatically. TECHNICAL DATA Weight: kg 1930 Dimensions: mm 4650 x 3300 x 2260 Frequency: 50 Hz Voltage: 380 volts Volume of suppositories ml 0,2 – 50 Max. film height: mm 73 Production max monodoses/h: 22000 Capacity of product tank: L 55 Packing materials used: PVC, PVC+PE, PVDC, ALU+PE, PP+ALU+PE. Easy access for machine registration, cleaning, and maintenance. Format change is quick and easy, memorization of the dimensions of the parts is done from the display panel.

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

We offer a new, universal element slab formwork system EVODECK 300m², directly from the factory at great conditions, special net price € 87,368.00 Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 150 Element EVODECK 150x120 cm with PP formwork plate 10 element EVODECK 150x75 cm with PP formwork board 10 element EVODECK 120x75 cm with PP formwork board 90 Drop head EVODECK 135 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 9 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and di ...

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Pullers with puller trolley for 200cm deep oven NEWSead trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 251cm D: 64cm H: 184cmInternal dimensions : W: 243cm D: 64cm10 pieces Pullers made of ALU Pullers for 200cm deep ovenPullers dimensions : W: 240cm D: 58cmSee pictureDo we have different sizes Pullers in stockDetails see picture  

Pullers with puller trolley for 160/180cm deep oven NEWThe puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 211cm D: 64cm H: 184cmInternal dimensions : W: 203cm D: 64cm10 pieces Pullers made of ALU Pullers for 160/180cm deep ovenPuller dimensions : W: 200cm D: 58cm Do we have different size pullers in stockDetails see picture 

Pullers with puller trolley for 80cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40mm screwedExternal dimensions : W: 126cm D: 64cm H: 184cmInternal dimensions : W: 118cm D: 64cm10 pieces Pullers made of ALU Pullers for 80cm deep ovenPullers dimensions : W: 115cm D: 58cm Do we have different size Pullers in stockDetails see picture 

Puller trolley with pullers for 60cm deep oven NEW Puller trolley stainless steel with 10 ALU pullerson roller trolley profile 40x40 mm screwedExternal dimensions : W: 101cm D: 84cm H: 180cmInternal dimensions : W: 93cm D: 84cm10 pieces Pullers made of ALU Pullers for 60cm deep ovenPullers dimensions : W: 78cm D: 90cm We have different large pullers in stock for details see pictures.

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

<br>UP: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOLIE: 30-100 MIKRON<br><br>Still in operation: No<br>Verf Gbar: immediately

PAPER: 35-250 GSM, WIDTH. 1300 MM, SPEED: 250 MM, ALU-FOIL: 30-100 MICRONS Still in operation: No Available: IMMEDIATELY

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

- Schnittlänge 1200 mm - Schnittbreite 950 mm - Schnitthöhe 90C 102 mm (mit Ritzsägeblatt) - Schnitthöge 45C 72 mm - Sägeblatt schwenkbar 45C - max. Sägeblattdurchmesser 315 mm - Motor 2,5 kW, 400 V - Motorleistung Vorritzer 0,55 kW - Drehzahlen 4000 Upm. - Vorritzaggregat mit Ritzsägeblatt 120 x 20 mm - Drehzahl Ritzsägeblatt 8000 Upm. - ALU-Formatschiebetisch mit Prismenführung, Breite 310 mm - Parallelanschlag mit Feineinstellung, Länge 900 mm - Quertisch B=430 x L=610 mm   mit Längenanschlag teleskopierbar bis 1400 mm   mit 2 Klappanschlägen   mit Gradanzeige für Gehrungsschnitte - Tischverbreiterung 470 x 800 mm - Tischverlängerung  400 x 300 mm - Parallelogramm Absaugvorrichtung mit breiter Absaughaube, wegschwenkbar - Absaugstutzen 1 x 100 mm, 1 x 80 mm - Abmessungen L=1450, B= 2700, H=1450 mm - Gewicht 350 kg INKLUSIVE: - Vorritzaggregat mit separatem Motor - S ...