alu used for sale

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

 Alu perforated baking trays 2 edge NEWAlu perforated trays 2 rim 580 mm x 780 mmPerforated tray 2 rim short  , rim height 10 mm , 45 degreesRound perforation 3.0 mmNominal material thickness 1.5 mmNEWDedetails see picture

 Aluminium perforated baking trays 3 rim NEW(10 pcs) Aluminium perforated trays 3 rim 580 mm x 780 mmPerforated tray 3 rim  , rim height 23 mmRound perforation 3.0 mmMaterial thickness 1.5 mmNEWDedetails see picture

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

standard cooler, car cooler, oil cooler, heat exchanger, hydraulic oil cooler, engine cooler, water cooler, standard cooler -Manufacturer: Nissens, cooler aluminum housing -Type: unfortunately no type designation -Number: 2x coolers available -Price: per piece -Dimensions: 675/110/H285 mm / 700/110/H290 mm -Weight: 7.5 kg / 7.7 kg

Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: MK Maschinenbau Kitz, belt conveyor on mobile base frame, height adjustable -Type: GUF-P 2000 AF 2900/600 -Speed: 13 m/min -Belt width: 590 mm -Conveyor length: 2900 mm -Drive: SEW-Eurodrive 0.12 kW, see photo nameplate -Case: VA -Transport dimensions: 2940/730/H1710 mm -Weight: 115 kg

Aluminum angular rotor BECKMAN COULTER JA-25.50 Fixed angle rotor Max: 25,000 rpm, 75,600 x g Capacity: 8 x 50 mL Nominal capacity: 3,000 mL Biosecurity Lid For use with Avanti J Series and J2 Series Centrifuges (except J-21 Series)

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 180 x 100 mm saw blade turning speeds: 3000 U/min total power requirement: 2,2 kW weight of the machine ca.: 0,51 t dimensions: 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: flat: mm turning speeds: 1400 / 2800 U/min engine output: 4,0 kW weight of the machine ca.: 180 Kg dimensions: 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device

Max. saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangle 380x70m Cutting capacity 45° left Round 180mm, square 150mm; Rectangle 290x70mm Cutting capacity 45° right Round 180mm, square 150mm; Rectangle 290x70mm Digital degree display for the saw table Turning range of the saw table 180° Spraying device 2-hand operation

Max. saw blade diameter: 350 mm Pneumatic material tensioners Micro spraying device Material feed via 2-hand operation Saw table can be rotated in both directions Length stop and roller conveyor on request

Offer 21478 Technical data: - Operation via handheld remote control with cable - Total load capacity approx. 2000 kg - Load capacity per table approx. 1000 kg - Platform made of aluminum with div threaded holes - Platform size approx. 2800 x 1800 mm - min. Lift table height approx. 280 mm - max. Lift table height approx. 1100 mm - Stroke approx. 820 mm - Hydr. drive 400 V / 1.1 kW each - Separate control cabinet - Separate hydraulic power unit with wall mounting rack - Space requirement approx. W 2850 x D 1850 x H 280 mm - Weight approx. 800 kg

approx. 2 pieces dock levellers, side-sliding truck dock leveller made of aluminium, Rite-Hite, Caema – used - : Price per piece ex location: only 695.-€ (net), incl. loading! Manufacturer: Rite-Hite, Caema Type: SKB 14/30421007 Year of Make: 2009 Load capacity: 4,000kg Weight: 128kg Width: approx. 1.50m Length: approx. 1,565mm Height difference: -215/+175mm Surface: Natural aluminium Guide rail: hot-dip galvanized, length 6,000mm, On-site ramp edging profile U-120 Condition: good Available: immediately Location: 6065 Thaur / Austria

Aluminium folding ladder assortment HAILO 1x 5 steps, 1x 4 steps, total 2 pcs.

Aluminium folding ladder WÜRTH 0962931106, 2x6 steps

Aluminium folding scaffolding approx. 140x200 cm, 1 plank

Masonry stairs aluminium 2 pcs., defective

Extension Ladder KRAUSE Aluminium 3x14 Steps

1 KRAUSE Stabilo double ladder 2x12, dimensions (LxWxH) approx: 2340x715x2800 mm 1 HYMER, 2x12-step, dimensions (LxWxH) approx: 2500x650x2700 mm Auction-ID: A7-48215-67

1 KRAUSE Stabilo double ladder 2x7, dimensions (LxWxH) approx: 1440x580x1670 mm 1 FRAME, 6-step, dimensions (LxWxH) approx: 1150x490x1870 mm Auction-ID: A7-48215-66

Aluminium straight ladder 10 steps

Technical details Manufacturer: ALUP Kompressoren Model: Solo 15 Type: Variable speed (VSD) oil-injected screw air compressor Year: 2004 Total running hours: 32,896 h Running hours under load: 30,046 h Time to regular maintenance: 1,765 h Motor power: 15.0 kW (20.0 HP) Operating pressure: 5.0–13.0 bar (72–188 psi) Free air delivery (FAD): 0.39–2.18 m³/min (14–77 cfm) Drive type: SCD direct drive (gearless / beltless) Control system: AirControl Cooling method: Air-cooled with radial fan Configuration: - Variable speed drive (VSD) - Oil-injected screw compressor block - Direct-drive transmission - Integrated AirControl management system Application: - Industrial compressed air supply - Manufacturing facilities - Workshop and production environments Dimensions: - Length: 1200 mm - Width: 610 mm - Height: 1720 mm Weight: 190 kg Condition: Used Auction-I ...

1 Overall dimension (LxWxH) approx: 620x650x445 mm 1 Overall dimension (LxWxH) approx: 670x700x510 mm Auction-ID: A1-48096-338

Max. saw blade diameter: 550 mm Swivel inside and outside 22.5° - 90° - 140° Pneumatic tilting of angles between 45 and 90 degrees Digital Angle Displays Feed via 2-hand operation Roller conveyors and length stops on request Weight: approx. 1,000 kg

Max. saw blade diameter: 380 mm Stepless saw blade feed via 2-hand operation Pneumatic material tensioners Minimum quantity spraying device Weight: approx. 350 kg

Screw shelves aluminium each approx. 180x40 cm, for cold storage shelf, 2 shelves, feet cannot be found

- Mobile bridge. - Total installed power 45 KW. - Usable working area approx. 5000 x 1500 mm. - Maximum travel speed 55 m/min. - Tool magazine with 12 positions. - Electrospindle: power 9 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holders. - Saw group for grooving in the direction of the X-axis. - Vertical holes in the x-axis direction: 6. - Vertical holes in the y-axis direction: 4. - Horizontal holes in the x-axis direction: 2 + 2. - Horizontal holes in the y-axis direction: 1 + 1. - Chip collection system. - TPA numerical control. - Remote control panel. - 10 benches with 38 suction cups in total. - HARNNETT 250G vacuum pump with a capacity of 250 m³/h. - Cutting tools and accessories are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are spe ...

Clearing trolley 2 pieces aluminium for 10 trays/trays approx. 25x70 cm, 5 trays each, total 2 wagons

Clearing trolley aluminium 6x70x50 cm

Steaker BIZERBA aluminium body, nameplate cannot be found, inserts, 380 V, old power plug

Aluminium table approx. 80x65 cm, drill holes

Aluminium trestle approx. 40x40x50h cm

Aluminium Extension Ladder 3x9 Steps

Aluminium articulated ladder 4x3 steps

Aluminium stepladders 2x6 steps, 2 pcs.

Aluminum ladders various. Versions, approx. 7 pcs.

Aluminium scaffolding parts small quantity, possibly incomplete

Aluminium stepladder 2x7 steps

Masonry stairs aluminium 4 steps each, approx. 100 b cm, approx. 2 pcs.,

Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 500 kg provides a stable and durable structure suitable for intensive use. Safety ...

FRECH DAK210 QC – Aluminum Die Casting Machine General data: Manufacturer: Frech Model: DAK210 QC Machine type: Aluminum die casting machine Weight: approx. 90 kg Dimensions (L x W x H): approx. 1550 x 450 x 700 mm Technical details: Installed power: 6.5 kW Electrical supply: 220 / 400 V Frequency: 50 – 60 Hz Description: Industrial aluminum die casting machine FRECH DAK210 QC designed for precision casting operations. The machine offers reliable performance and compact dimensions, making it suitable for small to medium production environments. requires maintenance. Auction-ID: A7-48441-34

Used Capping Machine BERTOLASO for Aluminium Screw Caps up to 9000 BPH The Bertolaso SIGMA 606 capping machine delivers reliable and high-performing results for aluminium cap applications. Specifically, this machine meets the needs of industrial bottling by ensuring efficiency and precision in the capping process. Moreover, its technical configuration makes it ideal for high-capacity production lines, reaching up to 9,000 bottles per hour. Main Technical Features of the Bertolaso SIGMA 606 The machine operates with six capping heads, which handle aluminium caps sized 28 x h 15 mm. As a result, this setup ensures that the machine applies uniform and secure closures, minimizing defects during production. The centrifugal cap feeder guarantees a continuous and steady flow of caps to the capping heads. Consequently, this system maintains consistent production speed, even under maximum load co ...

FRECH DAK200 SD – Aluminum Die Casting Machine General data: Manufacturer: Frech Model: DAK200 SD Machine number: 383701 Year of manufacture: 1995 Machine type: Aluminum die casting machine Technical details: Nominal locking force: 2200 kN Hydraulic operating pressure: 140 bar Core pulls: 2 Control system: Frech Datamat Description: Industrial aluminum die casting machine FRECH DAK200 SD designed for high-pressure casting applications. Equipped with Datamat control system and dual core pull functionality, the machine is suitable for medium-scale production and precision casting operations. requires maintenance. Auction-ID: A7-48441-21

Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to sp ...