alu foil used for sale

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

This MACO VK370 AR ALU Circular Wood Saw was manufactured in 2013. It features a head motor of 5.5 kW, a trim roller motor of 0.75 kW, and a lubrication pump of 0.1 kW. The blade speed ranges from 20–120 rev/min with a maximum blade diameter of 370 mm. It operates at a working air pressure of 5–7 bar. Consider the opportunity to buy this MACO VK370 AR ALU Circular Wood Saw. Contact us for more information.

See data on disk Two pieces available. Per plate weight approx. 50 kg

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Cooling: air-cooled Control: Hot Gas Valve Control: Digital display Condensate separation: lossless, Level-controlled steam trap Performance data Nominal capacity at pressure dew point +3°C 0.6 m³/min Max. operating pressure 16 bar Total energy consumption (25°C input temperature) 0.16 kW Refrigerant R513A 0.17 kg Installation data Ambient conditions min. / max. 5 / 43 °C Pressure drop at full load 0.25 bar Voltage / Frequency 230 / 50 V / Hz Dimensions and weight Length x width x height 350 x 493 x 450 mm Weight 19 kg Compressed air connection G 3/4 "ag

Galvanized compressed air tank Material: Hot-dip galvanized steel Version: upright Fittings: Safety valve, pressure gauge, Ball valve, test valve Installation data Capacity compressed air tank 270 lt Permissible operating pressure max. 11 bar Operating temperature min. / max. -10 / +80 °C Blow-off capacity safety valve 7.24 m³/min Dimensions and weight Diameter 500 mm Height incl. feet 1685 mm Weight approx. 66 kg Compressed air connection 4 x 3/4 "

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

Unused alubit grinding balls (alumina ceramic) designed for wet grinding (continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [1,000 kg]; 1 1/2'' (38 mm) [990 kg]; 2'' (50 mm) [700 kg]; 1 3/4'' (45 mm) [940 kg]; 2 1/2'' (64 mm) [1,970 kg]. All balls made in Italy, packed in 25 kg bags.

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.

Flat conveyor belt on aluminium substructure Length of the strap 410 cm, width of the strap 78 cm With the regulation of the amount

A glass cutting machine Lenhardt with a Tränker automation and control is available. Strip width: 777mm, strip length: 2366mm. Documentation available. An on-site inspection is possible.

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 160x30mm we also have different sizes in stock. Please see our offers at the shop. Details see picture

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 320x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 300x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 280x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminum NEW 10 pieces 240x30mmwe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza Trays / Baking Trays / Cake Trays Aluminum NEW 10 Pieces 260x30mmWe also have different sizes in stock. Please see our offers at the shop.10 pieces sheet metal size diameter 160x30mm = 80 Euro10 pieces sheet size diameter 180x30mm = 82 Euro10 pieces sheet metal size diameter 200x30mm = 85 Euro10 pieces sheet metal size diameter 220x30mm = 88 Euro10 pieces sheet metal size diameter 240x30mm = 92 Euro10 pieces sheet metal size diameter 260x30mm = 97 Euro10 pieces sheet metal size diameter 280x30mm = 111 Euro10 pieces sheet metal size diameter 300x30mm = 112 Euro10 pieces sheet metal size diameter 300x30mm = 112

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 220x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 200x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Pizza trays / baking trays / cake trays aluminium NEW 10 pieces 180x30mm  we also have different sizes in stock. Please see our offers at the shop. 10 pieces of sheet metal size diameter 160x30mm = 80 Euro 10 pieces of sheet metal size diameter 180x30mm = 82 Euro 10 pieces of sheet metal size diameter 200x30mm = 85 Euro 10 pieces of sheet metal size diameter 220x30mm = 8 8 Euro 10 pieces of sheet metal size diameter 240x30mm = 92 Euro 10 pieces of sheet metal size diameter 260x30mm = 97 Euro 10 pieces of sheet metal size diameter 280x30mm = 111 Euro 10 pieces of sheet metal size diameter 260x30mm = 10 pieces of sheet metal size diameter

Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg

Knurling machine, window construction profile machine, insulation joining machine -Manufacturer: Aluro, BTM knurling machine with accessories -Type: Knurling Machine -Function: a single machine, solely for knurling the strand cavity -Drive: 2x Lenze 0.55 kW -Rollers: Ø 125 mm -Travel distance X/Z: 120/155 mm -Accessories: see photos -Dimensions: 1180/700/H1480 mm -Weight: 297 kg

Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Hello, We hereby offer you new, originally-packaged Philips LED lamps of the type BVP130 LED210-4S/740 PSU S ALU C1KC3 from the CoreLine Tempo Large product family. Here are some technical data: Manufacturer: Philips CoreLine Tempo Large product family Type BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux 21,000 lm Nominal luminous efficacy 130 lm/W System power 164 W Light colour 740 neutral white Colour temperature 4000 K Optics Type: Symmetrical Beam angle 70° x 21° Input voltage 220 to 240 V Input frequency 50 to 60 Hz Inrush current 58 A Dimensions: 389 x 486 x 40 mm (W x H x D) Weight approx. 7.5 kg IP66 degree of protection For further technical data, please refer to the manufacturer's pdf product data sheet and pdf assembly instructions, which are available for download. Areas of application, lighting of: public facilities, sports facilit ...

Screw compressor Alup SCK25-10 18.50 kW 10 bar 2.62 m3/min Year of Make: 2012 Hours: 18,460

5 pieces, mobile dock levellers made of aluminium, – used- : Price per piece from location: Type 1: normal (approx. 2 pieces) now only 450.-€ instead of 650.-€ (net)! Type 2: two side tread plates (approx. 3 pieces) now only 550.-€ instead of 850.-€ (net)! Manufacturer: unknown, could be Altec Type: unknown, could be HF 09, Year of manufacture: unknown Width approx. 1.50m Length with movable driveways at the ends: approx. 2.35m Load capacity: unknown, could be 1800kg Net weight: unknown, could be 107kg Original price approx. 1.900.-€ (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg

Fully stocked – available at short notice – from professional stock Secured technical data From the documents: Manufacturer: Losberger KG. System: Aluminium tent hall 33/270. Width: 33.00 m. Length: up to 145.00 m. Modularly shortenable: from approx. 75 m. Eaves height: 2.70 m. Truss distance: 5.00 m. Structure: aluminium (Al Mg Si). Test book available. TÜV documents available. Flooring system: RÖDER wooden floor. Tarpaulin: dry in warehouse. Supporting structure: professionally stored in the cantilever rack. extensive accessories available.

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg

Working width: 400 mm; Working height: 300 mm; minimum workpiece length: 250 mm; Aggregates: 2 brush units separately adjustable; 1. Brush: Scotch Brite Medium / Diameter 220mm, Vario drive; 2. Brush : Scotch Brite Hard / Diameter 220mm, Vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely adjustable); Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;

Oil separator for the compressor Alup Aquamat - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Oil separator for the compressor Alup Aquamat Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Oil separator for the compressor Alup Aquamat Price: 170 EUR Download PDF Oil separator for the compressor Alup Aquamat Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive information from us about product news, promotions and information from our company. Save © 2022 by  ...

approx. 30 pieces of tensioning towers, approx. 3 pieces made of aluminium, the rest is made of steel, base plate approx. 630 mm x 630 mm x 65 mm, towers approx. l x w 360mm x 360mm, height with the base plate of 660 - 1025 mm, as can be seen in the pictures, the towers are partly still blanks and partly equipped with elements from Lang. The towers are also handed in individually.

Efficient forming in a compact format †Alu Framax 0.90 m in the ⭐⭐ Star Package! 🏗️ This package includes Doka Alu Framax formwork panels with a height of 0.90 m †perfect for low concrete pours, edge areas, or as a practical addition to your existing formwork system.   💡 The Alu Framax system stands out for its lightweight design , allowing for craneless use and making manual handling easier and more efficient . Despite its light weight, it offers an impressive load capacity of up to 60 kN/m †ensuring efficient and safe operation on your site.   The material is ⭐⭐ Star-classified †meaning it is cleaned, used , and suitable for medium to lower-demand applications . A reliable solution at an attractive price when functionality matters most.   🔧⚙️🔨 Now’s the tim ...

Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping

Alu-Framax 0.90 m †compact, strong, versatile! 🔧🛠 This package includes Doka Alu Framax formwork panels with a height of 0.90 m †ideal for low concreting heights, edge areas, or as a smart addition to existing systems.   ✨ Your benefits at a glance: Lightweight & durable thanks to robust aluminum frame profiles. Flexible handling †manually or by crane. Fewer infill zones due to consistent 15 cm panel grid. Optimized workflows , even in tight site conditions. Easy to clean thanks to colorless powder coating.   📦 Now is the perfect time to expand your site equipment and make your formwork projects even more efficient! Got questions? We’re happy to help! 🙂📞 Price: from € 193,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star ...

The Doka Alu-Framax pallet is the smart storage and transport solution for your Alu-Framax formwork elements . ✔ robust & galvanised †built for maximum durability ✔ stackable & space-saving †perfect for warehouse & jobsite ✔ delivered folded †easy handling & compact storage ✔ available in 3-star and 1-star quality 👉 Minimum order: 3 pcs = 1 packaging unit 🚛 On request, we deliver your pallets directly †or you simply pick them up yourself and get started right away.   Get your pallets now †before stock runs out! 🚀 Perfect for everyone who values quality, efficiency and order on site. Price: from € 215,00 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 1-star Serviced & limited ready to us ...

💥 Robust. Modular. Easy to handle. Looking for used formwork panels that save you time, stress, and budget? Then this set of Doka Alu Framax Xlife panels (height: 2.70 m) is exactly what you need! 💡 Ideal for wall formwork in high-rise construction, tight spaces, or fast-paced jobsites. ✅ Your benefits at a glance: 🪶 Lightweight & easy to handle †aluminum frame for quick setup, even without a crane 📏 15 cm grid = fewer fillers, clean joints & faster planning 🧹 Easy to clean †powder-coated surface = less effort on site 🔁 Fully compatible with other Doka systems 🚧 Built for professionals who value quality & reusability 📦 Secure your Doka aluminum frame formwork now & kick off your next project smartly! Buying used aluminum formwork has never been this easy. Price: from � ...

Go higher, spend smarter †Doka Alu Framax 2.70 m in the ⭐⭐ Star Package!   This package includes Doka Alu Framax formwork panels with a height of 2.70 m †ideal for large-scale applications where fewer panels cover more surface, saving you valuable time on the construction site.💪   The lightweight aluminum frame system can be used with or without a crane . Thanks to its low weight, it’s easy to handle manually †without compromising on performance. With a load capacity of 60 kN/m , it delivers reliable stability for every project.   The panels are ⭐⭐ Star-classified †meaning: cleaned, used , and suitable for medium to lower-demand applications . A smart choice for anyone looking to balance functionality and cost .   🔩🛠📦 Now’s the time to upgrade your site equipment  ...

The high-quality Doka Aluxo shoring tower saves time, reduces labor effort, and enables efficient work †even in hard-to-reach areas. Thanks to the lightweight aluminium frames, the aluminium shoring tower can be assembled quickly by just two people †completely without a crane. 🏗️   The robust Doka rental park quality stands out with high load capacity, maximum flexibility, and cost-efficient use on demanding construction sites. Ideal for companies looking for reliable used Doka formwork and professional shoring solutions.   ✔ fast assembly without crane support ✔ high safety standards on site ✔ flexible application possibilities ✔ reduced assembly time & lower labor costs   Also available: Doka screw jacks and Doka load-bearing jacks 70 for optimal height adjustment of your shoring tower.   Ϝ ...

Looking for used slab formwork to speed up your construction project? This Faresin Alufort formwork package offers approx. 292 m² of aluminium slab formwork , ideal for efficient concrete floor and ceiling formwork in residential and commercial construction. The Alufort system is designed for lightweight handling , high reusability, and fast installation on site. Perfect if you want to buy used aluminium formwork while still relying on proven quality. 🏗️ 💡 Key benefits: ✔ Robust aluminium slab formwork system †strong and lightweight ✔ Large 292 m² formwork package for slab and ceiling areas ✔ Used formwork with excellent value for money ✔ Including transport and storage pallets for easy logistics 📦 ⚠ Accessories are not included in this package, but available on request . Large slab formwor ...

🚧 360 sqm wall formwork †available, ready to use, immediately deliverable Need formwork on short notice? This is exactly the package. No waiting times, no sourcing hassle †complete, available, and ready to go .   🔥 Why this package? 360 sqm formwork in one lot → ideal for active projects mostly 3.0 m panels (1000x3000) †standard jobsite size MODALU system by Jean Four †modular, robust, proven incl. connection material → no additional sourcing needed used condition, but ready for immediate use location: France   🧰 Flexible setup 👉 Additional accessories available on request †easy to adapt to your project needs.   ⚡ Only one package available ⚡ No split sale †first come, first served   🚀 Bottom line  ...

Hinge, door hinge, folding hinge, steel hinge, side panel hinge, aluminum hinge, plug hinge, flag hinge -Hinge: Aluminum hinge, plug-in hinge -Type: 2-piece, height 80 mm, see photos -Item No.: 10002174 -Quantity: 128 hinges available -Price: per piece, minimum order quantity 2 pieces. -Dimensions when folded: 80/80/H43 mm -Weight: 0.2 kg/pc.

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 879 € : 20 - 76,1 mm : 3 mm : 2.5 mm : 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD