alternator ac used for sale

Bosch alternator -Nominal voltage: 14 V 70 A -Type: 028 903 028 C -Dimensions 158/184/H145 mm -Weight: 5.5 kg

Bosch alternator -Type: 1100827 22A 76E 3 -Voltage: 12 V -from forklift: Still type EFG 1.0/5002 -Dimensions: 187/165/H140 mm -Weight: 4.6 kg

Alternator regulator -Manufacturer: Bosch -Type: 0190113 004 850 -Number: 1x controller available -Price: per piece -Weight: 1.6 kg

Alternator regulator -Manufacturer: Bosch -Type: 0190 112 006 000 -Number: 5x controllers available -Price: per piece -Weight: 2.4 kg

Jenbacher 208 60HZ Phase 3 Stamford alternator. This low-hour phase 3 Stamford alternator is in great condition and is from a Jenbacher 208 that ran approx. 3,000 hrs. Machine ID Number: A09E186991 Frame / Core: HC.I53402 Stamford BS5000 VDE0530 Model: Stamford Hours: 3,000 HZ: 60 RPM: 1800 Volts: 400 / 346 Type rating H KVA: 644 Cont rating KVA: 588 Cont rating kW: 470 Please note this alternator is 60HZ. Price: Please Apply Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

alternator -Type: 0986 031 190 -28 V -Weight: 5 kg

SOLD New ABB AMG 1120MM08 DSE Alternator For Sale Suitable For Wartsila 20V34SG generators From 8.7 MW Wartsila 20V34SG generator 2 Units available new unused from surplus gen sets. Voltage: 10500 kV Output: 10913 KVA

Ansaldo Condensing Steam Turbine Power: 9000 kW RPM: 7500 / 1500 Steam pressure: 40bara Steam temperature: 420 ºC Back Pressure: 0,08bar Number of extractions: 2 Number of stages: 8

Marelli AC Generator MX 400 SC/4 AC synchronous generator from 1991 with unknown operating hours, 1 available. 400 volts/50 Hz, 825 KVA. Manufacturer: Marelli Model: MX 400 SC/4 Type: AC Synchronous Generator Serial Number: ML-3700 Power [KVA]: 825 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,190 Speed [1/min]: 1,500 Year of Make: 1991 Weight [kg]: 1.795

Marelli Motori AC Generator M7B 315 LD 4 AC synchronous generator from 1995 with 1,360 operating hours. 1 available 400 V/50 Hz – 575 KVA Manufacturer: MarelliMotori Model: M7B 315 LD 4 Type: AC Synchronous Generator Serial Number: MB5883 Power [KVA]: 575 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 830 Speed [1/min]: 1,500 Year of Make: 1995 Hours: 1360 Dimensions LxWxH [cm]: 1.40 x 0.90 x 1.20 Weight [kg]: 1.346

I sell this device.I don't know my way around, someone can tell me what the thing does and who can use something like that? I have put pictures of the nameplates with the performance data I would be happy if someone gets in touch Maybe someone can use the engine

Marelli MJH 630 MA4 4 B20 3000kva / 13.800volt 60hz 2800kva / 10.500volt 50hz Year 2022 (new and unused) located in our warehouse in NL: Kranenpool 10 6443VA Brunssum

Total Weight: 2,800 kg Output Current: 288 A Output Voltage: 400 V Output Frequency: 50 Hz Rated Power: 160 kW (217.54 hp) Rated (full) power: 160 kVA Constant Power: 160 kW (217.54 hp) Maximum speed: 1,500 rpm

JGS 616 GS-N.L

Stamford AC Generator PE734C2 Electricity generator unknown year of construction with approx. 63,000 operating hours, 415 volts V/50 Hz. Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12K489419 Power [KVA]: 1,445 Voltage [V]: 415 Frequency [Hz]: 50 Current [A]: 2.010 Speed [1/min]: 1,500 Year of manufacture: unknown Operating hours [h]: approx. 63,000 Weight [kg]: 3,000 Dimensions LxWxH [cm]: 190 x 95 x 135

Wooden planks/lintel boxes, 580 x 380 x 40 mm

Extraction hood 3500 mm, stainless steel, with light + filter

Cloth extractors for Winkler ovens, stove depth 1.6 m

Fermentation planks/lintel boxes made of wood, stackable

Settling boxes for Paderborner, 17 pieces

Bread boards

Alu baking trays, with 3 sides rim, 580 x 780 mm

Fermentation planks with cloth covering

Baking tray, with 2 sides rim, 840 x 360 mm

Baking grid (frame with wire mesh)

Baking tray with 2 sides edge 1000 x 250 mm

Black plate, with 3 sides margin

Cloth squeegee for Matador, 1.6 m

Alu - Trays for cakes, 400x580 mm/200x580 mm 3 edge 50 mm

Ringoplat digestate carrier / plastic bread roll plank,

Cloth extractors for Winkler ovens, stove depth 1.6 m

Baking tray with 4 sides rim, 390 x 580 mm

Fan - large fan blower, Fabr. Ziehl-Abbeg

Rack trolley made of stainless steel for sheet metal 60 x 40 cm

Auction-ID: A3-43507-39042

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

HAVE A GOOD DAY SIR. WE VE 1 PCS NEW UNUSED 1 PCS REBUILT WOODWARD UG ACTUATORS AT OUR STOCK . PLS FIND PART NUMBER AT BELOW PART NO. A8251-568 GG A8251-000 6 - WE VE 8 PCS USED WOODWARD UG ACTUATORS. PLS FIND SERIAL NUMBER AND DTLS AT BELOW.. PART NO. A8251-568 GG A8251-568 A8251-568 CW A8251-568 GH A8251-568 GG A8251-568 GG A8251 006 6 A8251 560 MH IF YOU INTEREST WE WILL OFFER YOU. ALL PARTS IN IZMIR TURKEY IF YOU'VE ANY QUESTIONS PKS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I30L-I30S / 6t payload Built: 2020 Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I30L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I30L Roll count: 4 / Material PU Height: 110mm Payload: 3t Weight: 14kg And Paralell suspension type: 30S Roll number 4 / Material PU Height: 110mm Connecting rod: 120-880mm Payload: 3t Weight: 14 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 128t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to chang ...

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

DATA ON THE MACHINE Machine type: Machine landing gear / Tank rolls Manufacturer: HTS Model: ECO-Skate I90L-I90S / 18t Payload Year of construction: new Condition: new Location Warstein , Germany Reference MZ-HTS-ECOSKATE-I90L+S-DP Description We offer you a new transport suspension from the manufacturer HTS / made in Germany consisting of Train drawbar Type:I90L Roll count: 12 / Material PU Height: 110mm Payload: 9t Weight: 57kg And Paralell suspension type: 90S Roll number 12 / Material PU Height: 110mm Connecting rod: 460-1145mm Payload: 9t Weight: 36 kg Further technical data on request. Not the chassis you're looking for? We are happy to offer you heavy-duty suspensions in various sizes up to 176t payload. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer i ...

- Propagator with 67.7 hl content, standing on 3 feet, in stainless steel, coolable, insulated and clad with stainless steel sheet, with spray head, dome cover, with agitator in the lower bottom, with electr. heating rod 4 KW, with fittings, Ø: approx. 2,000 mm, H: approx. 3,200 mm - Stacking tank with 120 hl content, standing on 4 feet, in stainless steel, insulated and welded tightly with stainless steel, with spray head, dome cover, with agitator in the lower bottom, with electr. heating rod 7.5 KW, with fittings, Ø: approx. 2,500 mm, H: approx. 4,000 mm

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5

Linear actuator, DGPL-050-865-PPV-A-KF-B, 161795, Festo, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84

for the production of products cast in moulds, such as chocolate bars, bars, etc. Accessories unit for SELMI Temper TOP EX only 1 year in production

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

nursing homes, accommodation, Modules can be put together.