alternator ac used for sale

Knott single-axle trailer chassis

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked The Suss MicroTec comes complete with HDD and software, wafer size 200 mm. It has an inkjet printer, not a classic coating/development tool. This means no cool plates, no coating/developer unit. It only has two hot plates, a centering station, and a main chamber where the inkjet printing takes place. Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU305S478 MakeManesty Accela-Cota LocationBarneveld Type48: Main Features MaterialStainless steel Inlet diameter480 mm Specified Features - Coating pan Coating pancheck Batch size+/- 150 kg Pan diameter1215 mm Pan depth950 mm Cylindrical width500 mm Conical width225 mm (2x) In-/Outletdia. 480 mm Motorcheck MaterialStainless steel General No.1 Q 175 Year of constructionunknown Floorspace1,80 x 1,70 m Total height2,00 m Weight750 kgStarchCoating pansSugarConfectionerySolid pharmaceuticsManestyIndustries > Food & Feed > StarchCoating pans > Coating pansIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A paper filling system for dispensing packaging paper is available. Speed: 30m/min, grammage: 70g/m²/120g/m². Machine dimensions X/Y/Z: approx. 750mm/500mm/1300mm, weight: approx. 80kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is a sample.

A paper filling system for dispensing packaging paper is available. Speed: 12m/min, basis weight: 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 630mm/400mm/400mm, weight: approx. 40kg. Documentation available. An inspection on site is possible. The machines are ready for dispatch. The picture is an example.

x-travel: 1.050 mm y-travel: 610 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 Distance between table and spindle: 100-710 mm table-size: 1.200 x 600 mm table weight: 1.200 Kg rapid travel x/y/z: 30.000/20.000 mm/min feed: 12.000 m/min spindle taper: BT-40 spindle turning speed range: 60 - 10.000 U/min spindle drive: 7,5/11 kW Tools changer: 20 pos. Internal cooling system: 20 bar Chip coveyor: 2 handwheel: HEIDENHAIN HR-410 tool diameter: 100 mm tool length - max.: 320 mm weight of tools max.: 10 kg total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.900 x 3.420 x 2.888 m Complete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box - Electrical cabinet air conditioning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 2 head stitching machine - Hohner stitiching heads - Standard machine with the existing accessories

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 28,330

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 18,701

This ACCUWAY UT-300LX2M Lathe machine was manufactured in the year 2016. It is equipped with a FANUC 0i-T Control Unit. It has a heat exchanger for electric cabinet and a lubrication system. The monitor (LCD) is 10.4 colored and dispose a three color warning light.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU095Y642 MakeZeppelin Weingarten TypeT-125-ACS P1 Mach.No.10.4-12798 Year of construction1998 Material Housing materialCast aluminium hard-coated Main Features MaterialAluminium/Stainless steel Specified Features - Diverter valve MaterialStainless steel General LocationBarneveld Extra SpecificationsPipe material stainless steel, DN125Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarDiverter valvesLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicTea, herbs & coffeePowdered foodsPaints & coatingsZeppelinIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chem ...

General SKU095Y658 MakeZeppelin Weingarten TypeT-125-ACS P1 Mach.No.10.4-12998 Year of construction1998 Material Housing materialCast aluminium hard-coated Main Features MaterialAluminium/Stainless steel Specified Features - Diverter valve MaterialStainless steel General LocationBarneveld Extra SpecificationsPipe material stainless steel, DN125Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarDiverter valvesLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicTea, herbs & coffeePowdered foodsPaints & coatingsZeppelinIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chem ...

General SKU390X1050 MakeZeppelin LocationBarneveld CEcheck TypeHDS 250/10 AC/SS/AC G Main Features MaterialStainless steel Motor0.75 KW Specified Features - Rotating valve Rotary valvecheck With hopper0,5 m3 With motor0,75 kW, 290/500 volt, 1440 rpm Rotor speed30 rpm MaterialStainless steel General No.83864 Year of construction2021 Mounted on framecheck Extra information Design pressure 3,5 bar, volume size 10,0 l., bulk density 680 kg/m3, design temperature 30 Fine chemicalsStarchRotating valvesAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicTea, herbs & coffeeGeneric medicinesPowdered foodsZeppelinIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchRotary valves > Rotating valvesIndustries > Chemical > AgrochemicalsIndustries > Food & Fee ...

ACS850-04-290A-5+E210+J400, ser.nr. 1152901315, ACS880-01-246A-3+E200, 132kW, 241A, ser.nr. 1174301299

General SKU212T144 MakeIndustrial Produkts LocationBarneveld TypeMBF-2002-AC06-080DV-21GEN Pressure Working pressure8 Bar Main Features MaterialStainless steel Surface7.5 m2 Specified Features - Candle filter Candle filtercheck Notified bodyTÜV Filter surface7,5 m² Number of candles20 Candle sizesDia. 165x680 mm Liquid outletDN 80 Max. temperature100°C Top connectionsDN50 (2x), DN 80 Capacity1140 Ltr. Vessel sizesDia: 1250x920 mm MaterialStainless steel 1.4571 (316Ti) General No.V102046 Year of construction2001 Mounted on legscheck Floorspace1,5x1x5 m Total height1,8 m Weight1080 Extra information test pressure 10.4 bar Fine chemicalsBiotechnologyAgrochemicalsCandle filtersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIOintm ...

General SKU353S829 LocationBarneveld MakeHosokawa Micron TypeACM-15 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 With grinding trackcheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts With variable speed drivecheck Speed160 - 1 600 rpm. Classifier Mills MaterialMild steel General No.600088071 Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul&:nbsp:RAL 6, with spare partsStarchSpicesClassifier millsCatalysts & fillersFeed addit ...

General SKU095Y639 MakeZeppelin Weingarten TypeT-125-ACS P1 Mach.No.10.4-12698 Year of construction1998 Material Housing materialCast aluminium hard-coated Main Features MaterialAluminium/Stainless steel Inlet diameter125 mm Specified Features - Diverter valve MaterialStainless steel General LocationBarneveld Extra Specifications-Pipe material stainless steel.-connection: DN125Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarDiverter valvesLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicTea, herbs & coffeePowdered foodsPaints & coatingsZeppelinIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemic ...

General SKU095Y640 MakeZeppelin Weingarten TypeT-125-ACS P1 Mach.No.10.4-12898 Year of construction1998 Material Housing materialCast aluminium hard-coated Main Features MaterialAluminium/Stainless steel Specified Features - Diverter valve MaterialStainless steel General LocationBarneveld Extra SpecificationsPipe material stainless steel, DN125Fine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.CosmeticsFood additivesSugarDiverter valvesLubricants & oleoAnimal feedDyes & pigmentsAPIMinerals & inorganicTea, herbs & coffeePowdered foodsPaints & coatingsZeppelinIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chem ...

General SKU054U425 MakeAZO TypeACW-7/6 Mach.No.2224/2225 Year of construction1996 Main Features Volume6 Ltr. Specified Features - Pneumatic conveying system Capacity4-6 KG Pneumatic air conveying systems MaterialStainless steel General Mounted on framecheck LocationBarneveld Floorspace2 x 1,5 m Total height1,75 m Weight750 kgStarchPneumatic conveying systemsAgrochemicalsSpicesCatalysts & fillersSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicTea, herbs & coffeePowdered foodsAZOIndustries > Food & Feed > StarchConveying systems > Pneumatic conveying systemsIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > SugarIndustries > Food & Feed > Animal feedIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Chemical > Dyes & pigmentsIndustries > Chemical > Min ...

General SKU353S828 LocationBarneveld MakeHosokawa Micron TypeACM-15 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 Without sieve cagecheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts Speed160 - 1 600 rpm. Classifier Mills MaterialMild steel General No.600880072 Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul&:nbsp:RAL 6StarchSpicesClassifier millsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesSugarAn ...

CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used

General SKUR1382 LocationBarneveld MakeHosokawa Mikropul (D) Main Features Motor15 KW Inlet diameter50 mm Specified Features - Classifier mill Grinderclassifying fine impact mill 2 Driven rotorscheck Rotor sizedia. 195mm Grinding room sizedia.330x130mm Pin diameter10mm (16x) With grinding trackcheck Inletdia. 220mm rotating valve to inlet 50mm Feeding with rotating valvecheck Motormill 15,0 kW, classifier 3,0 kW , 380 Volt Classifier Mills MaterialMild steel General TypeACM 10 No.600088063 Year of construction1988 Mounted on framecheck With switchgear(as is) Floorspace1,5x1,9 M Total height1,2 M Weight900 Kg Extra Specificationswith ventilator, explosion valves and noise reduction pipeStarchSpicesClassifier millsCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additivesSugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsBiopharmaceutica ...

Velo 40cm x 40cm Filter Frame with Pump Second Hand Manufacturer: Velo acciai Model Type: SF44NDF Serial No: 13789 For more information and more available stock please visit us at - advancedbrewing.co.uk

Stitching machine Hohner Accord 25/40, 2 stitching heads, saddle and block stitching, machine number 97.040.371, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Description Machine type: CNC-BAZ Vertical Model: M1 Pro with 4th axle incl. tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of Make: 2022 #001283 Location: Germany TECHNICAL DATA: Technical data Traversing range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Workpiece weight max. approx. 600 kg Speed max. approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Pick-up taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Facilities Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24 places chain magazine - SK40 - Coolant tank - IKZ pump 20bar - Filter for coolant - Bed flushing via M-function switchable - coolant spray gun - spindle blowing air switchable via M-funct ...

Heidenhain TNC 426/430 Year of construction 1998 Total Spindle Hours 17000 Travels X/Y/Z axis 500/380/380 mm Tool changer for 24 tools Tool holder SK40 Spindle speed 15000 rpm NC swivel rotary table 500 x 380 mm Feed speed max. 20000 mm/min Rapid traverse 30m/min Weight approx. 4000 kg Coolant Setup The machine is in very good condition. Milling spindle and axes run smoothly and very precisely.

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: ACOME Contact, fiber optic universal cable -Type: 4x50/125 OM2 N6997 -Application area: indoor and outdoor -Length: 153 m -Price: complete -Dimensions roll: Ø 710 x 410 mm -Weight: 16 kg

Manufacturer: Shinkawa Model: ACB-3000 Year of Manufacture: 2010 Condition : Good Electrical Rating - Supply Voltage: 230V - Full Load Current: 7A - Maximum Ampere Rating of the Short-Circuit and Ground-Fault Protective Device: 15A - Short-Circuit Current Rating: 10kA - Phase: Single Phase - Frequency: 50/60Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Several wet adhesive tape dispensing machines activaTec are available. Rated output: approx. 300m/min, tape width: 70mm, machine dimensions X/Y/Z: approx. 480mm/330mm/280mm, weight: approx. 12kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is an example.

A paper filling system for dispensing packaging paper is available. Speed: 85m/min, operating modes: 3, grammage: approx. 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 910mm/910mm/1650mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The image is a sample unit.

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, I/O modules for field use -Manufacturer: IFM -Type: AC2505 -Active ClassicLine module -AS-i interface to: FK subdivisions -Inputs: 4 -Sockets: M12 x 1 -Number: 2x available -Price: per piece -Dimensions: 40/50/H85 mm -Weight: 0.1 kg

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

bore capacity in steel (diameter): 22 mm throat: 270 mm spindle turning speed - stepless: U/min weight of the machine ca.: 1.1 t dimensions of the machine ca.: 1.2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-Axis Daewoo ACE-HP 4000 horizontal machining centre was manufactured in 2006, controlled by a FANUC Series 18i-MB system. It features comprehensive travel dimensions: 600mm in X, 560mm in Y, and 565mm in Z, along with table rotation capability. The machine is equipped with spindle cooling, a chip conveyor, and external workpiece cooling, ensuring optimal operation. A robust choice for precision machining, it combines extensive operating hours with dependable performance. Reach out for further details regarding this horizontal machining centre.

This ACRA CHALLENGER ASG-1632HS was manufactured in 2006. It features a robust hydraulic surface grinder with a table surface of 800 x 400 mm and a maximum table weight of 400 kg. Equipped with a variable electro-magnetic demagnetizing table and a 2-axis SONY DRO for enhanced precision. Very good condition. Contact us for more information about this machine.

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

General SKU397X1092 MakeAsca LocationBarneveld CEcheck Type343 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume340 Ltr. Motor0.9 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity340 l. Vessel sizesø 600 mm x 1000 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck Max. temperature200°C With propellor stirrercheck Motor0.90 kW (400 V, 1370 rpm (Ex)) Speed mixing shaft400 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.2295 Year of construction2001 Mounted on legscheck Floorspace0,9 x 0,9 m Total height2,7 m Weight820 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Othe ...

Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer, gas meter -Manufacturer: Actaris, volume gas meter -Type: MZ 80 DVGW DG-4705AP1040 -Qmax: 160 m3 / h -Qmin: 10 m3 / h -Pmax: 10 bar -Quantity: 1 pieces -Dimension: 170/120 / H260 mm -Weight: 9.0 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

General SKU279M286 MakeACOMETI LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor3.6 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity2000 Ltr Vessel sizesdia. 1400x1200mm Conical bottomcheck Dished top sidecheck Manholedia. 300mm Top connections9x Outlet80mm With jacket(bottom) With paddle stirrercheck Motor3,6 KW, 220/380 Volt (Ex) MaterialStainless steel With jacketcheck General Floorspace1,6x1,6 M Total height3,5 M Weight1300 KG ATEX designedcheckFine chemicalsStarchStirring vesselsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicTea, herbs & co ...

Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine.

This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information.

Trailers, construction machinery trailers -Remark: Vehicle registration missing, electrical wiring missing / damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, border height 410 mm -Overrun device: HahnType ABV25. 1DZKE 2010 up to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Own weight: 650 kg -Handover: in the current condition as viewed

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS, Profibus-DP, AS-i Gateway -Manufacturer: ifm electronic, AS-Interface control cabinet module -Type: AC2251 -Voltage: 20...30 V DC / 200 mA see photo type plate -Number: 12x module available -Price per piece -Dimension: 100/90/H130 mm -Weight: 0.2 kg/pc.