alternator ac used for sale

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

Manufacturer: Homag, Type: Homatic Achskarte, Model: Servo 4 Achser, Serial number: 2-083-02-8075,

Manufacturer: Berges Umrichter , Type: ACM-D2 11,0kw, Serial number: I 95072401, mH/Hz: 0-50 Hz/380 Volt,

Manufacturer: Homatic, Type: Streckenprozessor 4 Achser, Model: Rev 5 , Serial number: 2-083-02-7013, Year: 10.10.1995, Year :10.10.1995

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

• Nominal cooling capacity 5600-6000 kcal/h Temperature difference input-output 5°C Volume flow max. 20-24 l/min Thermoplastic tank 39 l Mobile Drive 230V/50-60Hz/2.33 kW

Control: HEIDENHAIN iTNC-530 x-travel: 885 mm y-travel: 800 mm z-travel: 520 mm B-axis (table): +30/-120 ° c-axis: 360 ° table-size: 600x500 mm tool magazin:: 60 spindle taper ISO: 40 Big Plus spindle turning speed - stepless: 15000 U/min total power requirement: 25 kW rapid travel x/y/z: 36 mm/min rapid traverse (slewing motion): 60 U/min rapid traverse feeds rotary table: 100 U/min dimensions of the machine ca.: 3.8x3.6x3.0 m weight of the machine ca.: 12,1 t Coolant through spindle: pressure: 20 bar 3D measuring tracer: RENISHAW Chip conveyor: Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: HEIDENHAIN iTNC-530 for axes: 5 x-travel: 712 mm y-travel: 508 mm z-travel: 515 mm -A-axis table swivelling: +30/-120 ° -C-axis table rotating: 360 ° rotary table dia.: 330 mm no. of tools in magazin: 60 max. tool diameter: 88 mm max. tool-dia with free toolbox: 125 mm max. tool length: 280 mm max. tool weight: 7 kg spindle taper: SK40 Big Plus spindle turning speed range: -15000 U/min power capacity - milling spindle: 25 kW weight of the machine ca.: 12.8 t dimensions of the machine ca.: 303x395x367 cm 3D measuring tracer: RENISHAW Zero point clamping system:: LANG TECHNIK Coolant through spindle: pressure: 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 135 mm z-travel: 300 mm spindle turning speed range: 100-2000 U/min table-size: 590x210 mm weight of the machine ca.: 0.6 t Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Carpentry machine Hundegger k2 625 5 axis year 2003

We are offering for sale a Motor Accessories Package that includes the following machines: Machine 1 Manufacturer: AEG Model: AR630S6B2KB Year: 1990 Enclosure: IP54 Shaft: Ø110 mm, 210 mm length Motor Type: High Voltage Motor Power: 1400.00 Speed: 2989 RPM Voltage: 5000 V Poles: 2 Machine 2 Manufacturer: AEG Model: AR500M6B4KB Year: 1992 Enclosure: IP54 Shaft: Ø100 mm, 210 mm length Motor Type: High Voltage Motor Power: 600.00 Speed: 1492 RPM Voltage: 5000 V Poles: 4 Machine 3 Manufacturer: SCHORCH Model: D3AK 5832/4R Year: 1970 Enclosure: IP33 Shaft: Unknown Motor Type: High Voltage Motor Power: 900.00 Speed: 1490 RPM Voltage: 5000 V Poles: 4 Machine 4 Manufacturer: SIEMENS Model: 1MA1 566-4XZ50-Z Year: 1995 Enclosure: 54 Shaft: Ø140 mm, 250 mm length Motor Type: High Voltage Motor Power: 1400.00 Speed: 1494 RPM Voltage: 5000 V Poles: 4 Ma ...

Key data: 46 °, 3 mm, 1 mm

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic:  ...

1. Qty. 1 Second-hand 2-Hi reversing cold rolling mill – still in operation! Manufacturer: ACHENBACH Built: 1958 Moved to present location and revamped in 2021. All electrical cabinet with necessary component renewed in 2021. There is no PLC system. The machine controlled by Relay Control System. All bearings and some mechanical parts have been replaced. Status: Still in operation Material: Alu - Alloy 1XXX, 3XXX, 8XXX Strip Width: max. 750 mm Thickness: 0.1 mm ≈ 5.5 mm Main Motor: 380 kW, AC controlled by resistive cascade system Rolling Speed: 100 m/min Coil Weight: max. 2000 kg

Brand-new ABB ACS800-04-0205-3 frequency converter module designed for cabinet assembly. Technical Specifications: Model: ACS800-04-0205-3 Input Voltage (Uin): 380–415 V Mounting Type: Module for cabinet assembly Output Power (Heavy-Duty Use): 132 kW Output Power (Normal/Light-Overload Use): 160 kW Output Current (Heavy-Duty): 234 A Ncobmy Exswucfls Ipou Output Current (Light-Overload): 285 A Output Current (Normal): 290 A Frequency: 50/60 Hz Condition: New Availability: 1 pc in stock Shipping Weight: 92 kg

Available for sale: ABB ACS800-01-0120-5 Frequency Converter, complete with module options D150, E210, K454, L503, and Q967. A high-performance wall-mounted unit for variable-speed motor control and heavy industrial applications. Technical Specifications: Model: ACS800-01-0120-5+D150+E210+K454+L503+Q967 Input Voltage (Uin): 380–500 V Frequency (f): 48–63 Hz Number of Phases: 3 Mounting Type: Wall-mounting Output Power (Heavy-Duty Use): 75 kW Ncobmy Exjwuchgs Ipeu Output Power (Light-Overload Use): 90 kW Output Power (Normal Use): 90 kW Output Current (Heavy-Duty Use): 113 A Output Current (Light-Overload Use): 145 A Output Current (Normal Use): 157 A Condition: New Availability: 1 pc

General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Ncsbmjv Edh Rjy Ex Ipsu Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources Typical Applications Hea ...

Resolution: 2400 dpi Manual plate feed line Speed 21 pl/hr. Max. plate size max. 838 x 990 mm mm plate size min. 267 x 215 mm mm

A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...

CNC Portal Flame Cutting Machine Manufacturer: Bach Type: ACK-2D Year of Make: 2006 CNC Control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel burners

Corner forming machine

AGFA Acento E (Screen 4100 E) year 2006 16 diodes plate winding cycles 66.600 exposure time 5,800 h PC with ApogeeX good condition

width of the strips: 45.0 mm band length: 850 mm band speed: 8.0 m/sek. voltage: 230 V total power requirement: 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mm band length: 1490 mm band speed: 8.0 m/sec motor: 400 Volt loading area: 500 x 280 mm total power requirement: 1.5 kW Dimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 300 mm band length: 2070 mm band speed: 7.0 m/sec surface of working table: 750 x 380 mm diameter: 87.7 Führungsrollen mm engine output: 1.5 kW total power requirement: 400 Volt weight of the machine ca.: 88.0 kg. range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm c-axis: 360 ° b-axis: -50 / +110 ° distance spindle nose and table: 170 - 630 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 500 kg spindle turning speed range: 12.000 U/min drive capacity - spindle motor: 15,5 / 33,0 kW rapid traverse: 48 m/min tool change unit: 48 Pos. SK 40 coolant: IKZ 30 bar voltage: 400 V total power requirement: 35 kVA weight of the machine ca.: 10,0 t dimensions of the machine ca.: 4,00 x 2,46 x 2,85 m chip conveyor: 2,90 x 0,50 x 1,30 m coolant tank: 2,30 x 1,70 x 0,45 m coolant pump: 0,60 x 0,50 x 0,90 m Oil cooler: 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor The data for this ad was created with ModulMWS - the sof ...

A digital UV flatbed printer Fuji is available. Rigid material: max. dimensions X/Y: 1250mm/2500mm, max. material thickness: 50.8mm, max. printing dimensions X/Y: 1260mm/2510mm, max. material density: 34kg/m². Roll material: max. printing width: 2190mm, roll width range: 900mm-2200mm, max. roll weight: 50kg. Ink type: KN series/KV series, channels: 5, colors: CMYK/white. Droplet size range: 6pl-42pl, min. print resolution: 1200dpi, print modes: 6, max. printing speed standard/roll: 22.8m²/18.9m²/h. Machine dimensions X/Y/Z: approx. 4100mm/2000mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. The machine is ready for shipment and cannot be demonstrated.

Thermo Fisher refrigerated microcentrifuge, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a

Thermo Fisher refrigerated microcentrifuge, Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C

Manufacturer: ACA Model: AGN2D2 Year of Manufacture: 2020 Condition : Good Weight: 1500 kg Input Voltage: 240V / 50Hz Phase: Single Power: 1500W Full Load Current: 7A Short Circuit Current: 30mA Find more here - / Contact us at -

Warneke aluminum tipping body, two axles with steering axle, - Year of construction: 1990, - Support load: 10 t, - Wheelbase: 220cm, - Dead weight: 10.6 t, - Maximum permissible total weight: 30 t

Knott single-axle trailer chassis

Manufacturer: SUSS Model: MicroTec ACS200Gen3 Year of Manufacture: 2021 Electric Power: - Voltage: 400V 3-phase + N + PE - Power: 16 kVA - Frequency: 50 Hz - AIC: 100 kA / 400 VAC - FLC: 23 A - SCCR: 5 kA - Max. Single Load: 5.5 A Pneumatic Connections: - CDA (Air): 6 bar ±10% - Nitrogen (N₂): 6 bar ±10% - Vacuum (VAC): -0.8 bar ±0.1% - DIW (Deionized Water): — bar Compliance: CE Marked Find more here - / Contact us at -

General SKU305S478 MakeManesty Accela-Cota LocationBarneveld Type48 Main Features MaterialStainless steel Inlet diameter480 mm Specified Features - Coating pan Coating pancheck Batch size+/- 150 Kg Pan diameter1215mm Pan depth950mm Cylindrical width500mm Conical width225mm (2x) In-/Outletdia. 480mm Motorcheck MaterialStainless steel Information No.1 Q 175 Year of constructionunknown Floorspace1,8x1,7 M Total height2,0 M Weight750 KgCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Actini Effluent treatment skids, 2016, Effluent treatment system, they have both pH dosing capability and a steam heat exchanger for heat sanitization, water is then clear to be reused or disposed into drainage.

table-size: - mm vertical movement: - mm on behalf of the customer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 2500 mm table-size: 2.000 x 2.500 mm table weight: 20.000 Kg B-axis (table): (0.001º) mm w-axis: 2000 mm z-axis: 800 mm rapid taverse: 10.000 mm taper ISO: ISO 50 turning speeds: 0-2.000 U/min spindle drive motor: 37 kW Torque: 12–183 U/min 0 internal coolant system feed: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 74 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A paper filling system for dispensing packaging paper is available. Speed: 30m/min, grammage: 70g/m²/120g/m². Machine dimensions X/Y/Z: approx. 750mm/500mm/1300mm, weight: approx. 80kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is a sample.

A paper filling system for dispensing packaging paper is available. Speed: 12m/min, basis weight: 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 630mm/400mm/400mm, weight: approx. 40kg. Documentation available. An inspection on site is possible. The machines are ready for dispatch. The picture is an example.

x-travel: 1.050 mm y-travel: 610 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 Distance between table and spindle: 100-710 mm table-size: 1.200 x 600 mm table weight: 1.200 Kg rapid travel x/y/z: 30.000/20.000 mm/min feed: 12.000 m/min spindle taper: BT-40 spindle turning speed range: 60 - 10.000 U/min spindle drive: 7,5/11 kW Tools changer: 20 pos. Internal cooling system: 20 bar Chip coveyor: 2 handwheel: HEIDENHAIN HR-410 tool diameter: 100 mm tool length - max.: 320 mm weight of tools max.: 10 kg total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.900 x 3.420 x 2.888 m Complete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box - Electrical cabinet air conditioning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 2 head stitching machine - Hohner stitiching heads - Standard machine with the existing accessories

Key data: 1081 KW, 2300 1/min

Due to new motorization In rotating condition removed this used Caterpillar C32 ACERT built under class Norske Veritas Shooting hours 28,330

Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools