127,740 used machines on RESALE, but how to find them? Machine Search
accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice
Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V
WITHOUT cabinet Auction-ID: A7-48588-28
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
Modular Roll Mat Chain - new 1525 x 340
- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
Conveyor belt / accumulation conveyor / belt conveyor Working height approx. 850 mm, can be adjusted. Length 1000 mm Width approx. 500 mm Equipped with photocell to stop product when downstream machine occupied (contact for pre and redesigned machine available). Equipped with its own drive and controls. Transport speed is infinitely adjustable via potentiometer.
No battery Auction-ID: A1-47380-318
number: 10 Positionen weight: 30 kg condition: neu : 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)
Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)
suitable for Peddinghaus profile steel shears Effective length 2,000 mm
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
COOLANT UNIT for DMU 160P. General Aspects COOLANT TANK CAPACITY (L): 1.300 FILTER CAPACITY (L/MIN): 600 MOTOR: MOTOVARIO SW040 T 100 POWER (KW): 0,12
maximum number of results exceeded
please refine your search
450 € 
