alternator 1 mw used for sale

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Riedel , single-phase safety transformerr -Type: RNTU 120 S -Power: 120VA -Technical data: see photo identification plate -Dimensions: 125/135/H155 mm -Weight: 3.8 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Crane chassis: Beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical drawing in the photos -Number: 8x chassis available Price: per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.

gear motor, electric motor, electric gear motor -Manufacturer: Affeldt, gear motor type 1S32VF-71S/4MKK -Speed: 151 rpm i= 9.25 -Power: 0.25 kW -Shaft: Ø 14 x 30 mm -Design: B5 angle -Protection class: IP 55 -Number: 1x engine available -Dimensions: 310/210/H140 mm -Weight: 7.8 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, full-extension ball guide, roller slide guide -Manufacturer: Hettich, drawer rail roller slide guide type FR 1105/400 -Drawer length: 400 mm -Load capacity: 100 kg -Quantity: 3x set available -Price: per set -Transport dimensions: 400/40/H40 mm -Weight: 1,9 kg/set

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, full-extension ball guide, roller slide guide -Manufacturer: Hettich, drawer rail roller slide guide type FR 1105/450 -Drawer length: 450 mm -Load capacity: 100 kg -Quantity: 1x set available -Price: per set -Transport dimensions: 450/40/H40 mm -Weight: 2,1 kg/set

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, container dolly, heavy-duty trailers -Handover: in current condition as seen -Note: Pay attention to the condition of the wheels -Platform: 11,000/3000/H1070 mm -Load capacity: 100 tons -Steering: double -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Wheels number: 32 pieces -Wheel Size: 646/200-480 -Total dimensions: 12,300/3000/H1070 mm -Weight: 12200kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Platform: 11,000/3,000/H1,100 mm -Load capacity: 100 tons -Steering: possible on both sides -Drawbar length: 1500 mm -Drawbar eye: Ø 50 mm -Number of wheels: 32 pieces -Wheel size: 646/200-480 -Overall dimensions: 12,300/3,000/H1,100 mm -Weight: 12960 kg -Handover: in its current condition as inspected -Note: Check the condition of the wheels

Electric motor, three-phase motor -Manufacturer: Hanning, electric motor type W22 WIMES Premium 160L-04 -Power: 18.5 kW -Speed: 1475 rpm -Voltage: 380/660 V -Shaft: Ø 50 x 235 mm -Shaft axis height: 260 mm -Design: B3 -Protection class: P 33 -Dimensions: 850/465/H465 mm -Weight: 247 kg

Resistance, wire potentiometer, resistor, DC resistance, radio interference suppression choke, fixed inductors, interference suppression choke -Manufacturer: Fastron, radio interference suppression choke fixed inductors 1000 pieces -Type: MESC-101M-01 -Inductance: 100 µH / 1 A -Price: complete -Transport dimensions: 300/300/H100 mm -Weight: 2.9 kg

Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

flat gear motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Nord, gear motor -Type: SK 5080A--132 S/4 -Speed: 126 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 60 x 150 mm -Protection class: IP54 -Dimensions: 500/450/H335 mm -Weight: 93 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type K11R 160 L4 R -Power: 13.5 kW -Speed: 1470 rpm -Voltage: 380/420 V / 655/725 V -Shaft: Ø 42 x 110 mm -Protection class: IP54 -Number: 2x motor available -Price: per piece -Dimensions: 650/345/H415mm -Weight: 142 kg/pc.

Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm -Engine: Nord Type SK 180 L / 4 -Power: 22.0 kW / 1450 rpm -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm -Weight: 243 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, gear motor -Type: SK 4282AZ-132 S/4 i = 9.23 -Speed: 158 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 50 x 195 mm -Protection class: IP55 -Dimensions: 630/320/H450mm -Weight: 104 kg

Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eA 160 MA-4 Ex-protected -Power: 10 kW Speed: 1465 rpm -Voltage: 380/500 V see photos nameplate -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Number: 2x motor available -Price per piece -Dimensions: 580/400/H310mm -Weight: 106 kg/pc.

flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 1282A-80 L/4 i= 14.11 -Speed: 100 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW / 1380 rpm -Hollow shaft: Ø 30 x 120 mm -Protection class: IP55 -Dimensions: 380/200/H260 mm -Weight: 25 kg

flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: unfortunately no type designation -Speed: approx. 132 rpm -Engine: Type? -Power: approx. 2.2 kW -Hollow shaft: Ø 35 x 115 mm -Dimensions: 410/240/H320 mm -Weight: 40 kg

Three-phase motor, electric motor -Manufacturer: Loher, electric motor type eA 180 MA-4 Ex-protected -Power: 15 kW -Speed: 1460 rpm -Voltage: 380/500 V see photos nameplate -Shaft: Ø 48 x 110 mm -Protection class: IP44 -Number: 2x motor available -Price per piece -Dimensions: 650/430/H350mm -Weight: 156 kg/pc.

flat gear motor, geared motor, electric motor, electric gear motor, flat gear motor, flat gear motor -Manufacturer: Nord, flat gear motor -Type: SK 2282A-100 LP/4 TF i= 10.15 -Speed: 144 rpm -Engine: Type SK 80 L/4 -Power: 2.20 kW -Hollow shaft: Ø 35 x 140 mm -Protection class: IP55 -Dimensions: 450/270/H330 mm -Weight: 53 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Electric motor, three-phase motor, brake motor -Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from milling machine Deckel FP4L -Power: 4.0 kW -Speed: 1435 rpm -Design: B14 -Protection class: IP 44 -Brake: multi-disc brake type EK5dB24 -Dimensions: 575/270/H225mm -Weight: 64 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer:Si Smiths Industries, hydraulic pump hydraulic unit -Type: 102680-13-24 -Voltage: 24 V -Pressure: 160 Bar -Dimensions: 160/130/H330mm -Weight: 10.1 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Ziehl-Abegg, fan blower radial fan type MK085-4EK.10N -Engine power: 0.16 kW -Speed: 1330 rpm -Volume output: /min -Fan wheel: Ø 315 mm -Connection input: Ø 215 mm -Dimensions: Ø 315 x 180 mm -Weight: 6.7 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, glass scale from milling machine Deckel FP4L -Type: LS 803 ML 1240 mm -Quantity: 1x glass scale available -Dimensions: 1345/200/H50 mm -Weight: 1.2 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type DVT 2.140 -Drive: AEG 5.5 kW / 1440 rpm -Volume flow rate: 140 m³/h -Suction pressure: -500 mbar -Final compression pressure: 500 mbar -Dimensions: 980/380/H520 mm -Weight: 146 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor, electric motor -Manufacturer: Perske, milling motor electric motor type DKNS 1207/2 -Power: 100 Hz 3 kW 5800 rpm / 200 Hz 5 kW 11350 rpm -Voltage: 380/400 V -Mounting shaft: Ø 35 x 75 mm -Number: 2x motor available -Price: per piece -Dimensions: 460/250/H200 mm -Weight: 35 kg/piece

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Klump, Conveyor belt type IK 2133 unused -Width: 140 mm -Length: 7260 mm -Thickness: mm -Quantity: 1 conveyor belt available -Dimensions: 280/250/H140 mm -Weight: 2.2 kg

Electric motor, three-phase motor, fan motor, external rotor motor for fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Ziehl-Abegg, electric motor fan motor external rotor motor -Type: MK 115-GDK.12.N -Power: 0.35 KW / 380 V -Speed: 1400/1020/710 rpm -Protection class: IP 54 -Dimensions: Ø 190 x 170 mm -Weight: 11.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit type HY 1359 -Engine: 2.2 kW -Pressure: up to 105 bar -Flow rate: 10.5 l/min -Hydraulic tank: with filter and level indicator -Tank capacity: 63 liters -Individual components: see photos -Dimensions: 650/510/H740 mm -Weight: 105 kg

Flat gear motor, geared motor, electric motor, electric geared motor, adjustable geared motor, variable speed geared motor -Brake: dismantled -Manufacturer: Nord, adjustable gear motor -Type SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5-109 rpm -Engine: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection class: IP54 -Shaft: Ø 45 x 90 mm -Brake: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: Denios, spill containment tray with steel cabinet construction -Drip tray: Type MC 1.10 -Collection volume: 1100 liters -Load capacity: 2000 kg -Dimensions (D/W/H): 1580/1340/1930 mm -Dimensions: D/W/H 1925/1590/2760 mm -Weight: 493 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Number: 5x mounting flange available -Price: per piece -Dimensions total Ø 180 x 100 mm Weight: 7.1 kg/piece

Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Konecranes, electric chain hoist with powered trolley -Chain hoist: Type XN10 1604 b1 load capacity 1600 kg -Main stroke: 4 m/min -Fine stroke: 1 m/min -Hook path: 5.4 m -Crane chassis: TDV 1600 20/5 m/min -Carrier width: max. 310 mm -Dimensions: see photo technical drawing -Transport dimensions: 1200/700/H550 mm -Weight: 110 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Reluctance motor, electric motor, three-phase motor, electric gear motor, reluctance motor -Manufacturer: KSB, electric motor type 132S-BWA7F3NNWDWAZKS -Power: 7.5 kW -Speed 50 Hz: 1500 rpm -Speed 100 Hz: 3000 rpm -Design: B5 -Shaft: Ø 38 x 80 mm -Protection class: IP 55 -Number: 1x available -Price: per piece -Dimensions: 470/345/H300 mm -Weight: 56 kg

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Steel beam, HEB steel beam, double T-beam, IPB steel beam, steel column -Steel beam: HEB 140 mm with head and base plate -Condition: according to pictures -Total length: 4280 mm -Width: 140 mm -Height: 140 mm -Flange thickness: 12 mm -Bridge thickness: 7 mm -Base plate: 300 x 300 x 25 mm -Head plate: 200 x 250 x 20 mm -Number: 53 pieces steel beams available -Price: per piece -Weight: 171 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Case: made of stainless steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 112JM/31/4/6/223S D160L -Power: 15 kW 1465 rpm -Number: 3x fan available -Price: per piece -Dimensions: 1350/1350/H830 mm -Weight: 300 kg/piece

Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan -Housing: galvanized steel -Condition: Fans are unused (stock items) -Manufacturer: Fläkt Woods, axial fan axial fan -Type: 100JM31/04/09/22 50Hz 2L D160 -Power: 11 kW 1465 rpm -Fan wheel: Ø 1000 mm -Number: 1x fan available -Dimensions: Ø 1245 x 800 mm -Weight: 237 kg

Pillar jib crane, indoor crane, workstation crane -Manufacturer: Demag, pillar jib crane load capacity 125 kg -Base plate: 350 x 350 mm -Thrust: 2,000 mm -Total height: 1,780 mm -Hook height: 840 mm -Chain hoist: DEMAG type DC-Com 1 125 1/1 H4 V8/2 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 540/2100/H500 mm -Own weight: 176 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: Wuxi Madis, single-phase transformer type JBK3-1000VA -Power: 1000 VA -Technical data: see photo type plate -Dimensions: 150/150/H150 mm -Weight: 12.3 kg

Servo motor, geared motor, electric motor -Manufacturer: Lenze, servo motor with gearbox -Speed: 144.0 rpm -Engine: Type MCA 10140-RS0B0 -Voltage: 390 V / 140 Hz -Power: 0.80 kW -Transmission: Type G50BH114MVAR2C00 i=27.415 -Shaft: Ø 25 x 50 mm -Number: 3x geared motors available Price: per piece -Dimensions: 455/145/H155 mm -Weight: 11.1 kg/pc.

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg

Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg

Press brake, bending machine, bending machine, swing bending machine, die bending machine -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 430/300/H340 mm -Weight: 11 kg

Pallet trucks, special pallet trucks for high pallets, pallet trucks, pallet trucks, scissor pallet trucks, scissor lift pallet trucks, single-scissor lift pallet trucks -Manufacturer: Nobelift, Scissor lift pallet truck type 501-1008 -Load capacity: 1000 kg -Stroke range: 85-800 mm -Fork length: 1150 mm -Outer fork width: 540 mm -Dimensions: 1460/540/H1310 mm -Weight: 107 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg.