alternator 1 mw used for sale

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gardner Denver, rotary vane vacuum pump type VC 150 (20) -Flow rate: 150 m³/h -Drive: 3 kW Overall dimensions: 710/400/H290 mm -Weight: 92 kg

Joint bearing -Inner diameter: 140 mm -Outer diameter: 230 mm -Brite outer ring: 80 mm -Width of inner ring: 130 mm -Grease groove -Weight: 18 kg -Number: several available

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 A -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 3x motors available -Price: per piece -Dimensions: 525/285/H320 mm -Weight: 88 kg/piece

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 1615 mm / 1x 670/465/250/170/60 mm each -Transport dimensions: 720/220/H50 mm -Total weight: 24 kg

Electric motor, three-phase motor -Manufacturer: Siemens-Schuckertwerke, electric motor type 1LA2026-4AB -Power: 0.37 kW -Speed: 1360 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection rating: P33 Tropical proof -Dimensions: 233/140/H180 mm -Weight: 6.0 kg

Electric motor, three-phase motor -Manufacturer: ZP, electric motor type 100 -Power: 3.3/2.6 kW -Speed: 2800/1400 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Dimensions: 355/235/H200 mm -Weight: 24 kg

Light barrier, safety light curtain -Manufacturer: SICK, light barrier type C4000 transmitter -Type: C40S-1201DA040 -Protective field height: 1200 mm -Voltage: 24 VDC -Number: 2x transmitters available -Price per piece -Dimensions: 1360/50/H60 mm -Weight: 2.8 kg/piece

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection class: IP44 -Dimensions: 605/315/H400mm -Weight: 121 kg.

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMER 160 L4 -Power: 15 kW -Speed: 1455 rpm -Voltage: 380/660 volts -Shaft: Ø 42 x 110 mm -Protection rating: IP44 -Design: B3 -Dimensions: 600/320/H395 mm -Weight: 123 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Emod, electric motor type 132 S/4 -Speed: 1460 rpm -Power: 5.5 kW -Voltage: 380/660 V -Design: B5 -Shaft: Ø 38 x 80 mm -Dimensions: 450/340/H300mm -Weight: 65 kg

Electric motor, three-phase motor -Manufacturer: Sintec, electric motor type 160M4 -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Dimensions: 610/320/H415mm -Weight: 115 kg

Gearbox, spur gear, angle gear, worm gear -Gearbox: unfortunately without type designation -Translation: i= 131:1 -Shafts: Ø 28 x 35 mm / Ø 14 x 15 mm -Dimensions: 158/210/H158mm -Weight: 10.3 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Müco, single-phase transformer type EST 160 -Power: 160 VA -Voltage: 230V 50/60Hz -Technical data: see photo type plate -Dimensions: 100/80/H100 mm -Weight: 2.3 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: IAI, linear actuator type ISA-LXM-I-400-20-1100-T2-X15 -Stroke length: 1100 mm -Number: 1x linear drive available -Dimensions: 1470/165/H95mm -Weight: 25 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KR 160 1/4 -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP44 -Design: B3 -Dimensions: 520/410/H320mm -Weight: 95 kg

electric motor, three-phase motor -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

three-phase motor, electric motor -Manufacturer: Loher, electric motor type A 100L1A-12/4 -Power: 0.18/0.55 kW -Speed: 465/1475 rpm -Shaft: Ø 28 x 60 mm -Protection class: P 33 -Dimensions: 385/275/H250 mm -Weight: 31.5 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 6 m -Transport dimensions: Ø 660 x 140 mm -Weight: 5.9 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt, transport belt, unused -Width: 140 mm -Length: 6 m -Dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 4300 m -Transport dimensions: Ø 220 x 140 mm -Weight: 2.6 kg

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

three-phase motor, electric motor -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LA766-4AA60-ZN00 160L -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Dimensions: 590/315/H360 mm -Weight: 83 kg

Electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1465 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B3 -Dimensions: 670/340/H440 mm -Weight: 152 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-59 mm -Type name: 508x10-100x127 / 508x10-80x127 -Dimensions total Ø 190 x 100 mm -Weight: 7.7 kg

Electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor explosion-proof -Type: 180L-4 -Power: 22 KW -Speed: 1465 rpm -Shaft: Ø 48 x 110 mm -Design: B5 -Protection class: IP54 -Dimensions: 700/475/H350 mm -Weight: 219 kg

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Manufacturer: P&D, drip tray -Drip tray: Type -Collection volume: 180 liters -Load capacity: 800 kg -Grating: galvanized -Dimensions: 1210/1240/H285 mm -Weight: 493 kg

Rear weight, forklift weight -Manufacturer: Clark, tail weight -Recording/Dimensions: see photos -Transport dimensions: 1110/1000/H650 mm -Weight: 1900 kg

Height gauge, parallel gauge, height measuring device -Altitude gauge: Altimeter -Max. working height: 1000 mm -Dimensions: 280/160/H1100 mm -Weight: 7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg

Manometer, test manometer, pressure gauge with Bourdon tube, Bourdon tube manometer -Manufacturer: Armaturenbau, pressure gauge with glycerin filling, unused, original packaging -Type: RKG 63-3,r 0-100 bar G1/4 A -Quantity: 1x pressure gauge available -Cardboard dimensions: 95/95/H75 mm -Weight: 0.3 kg

electric motor, three-phase motor -Manufacturer: Wolf, electric motor type 1LG4186-4AA60-Z 180L -Power: 22 kW -Speed: 1455 rpm -Protection class: IP55 -Shaft: Ø 48 x 110 mm -Design: B5 -Dimensions: 720/350/H450 mm -Weight: 184 kg

Reluctance motor, electric motor, three-phase motor, geared electric motor, reluctance motor -Power: 7.5 kW -Speed: 1450 rpm -Design: B5 -Shaft: Ø 38 x 80 mm -Protection class: IP 54 -Quantity: 1 available Price: per piece -Dimensions: 495/300/H355 mm -Weight: 52 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3.5 kW -Output: 105/140V 291/391Hz -Power: 3.4 kVA -for edgebanders, edgebanding machines -Weight: 120 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3 kW -Output: 130 V 200 Hz -Power output: 4 kVA -for edgebanders, edgebanding machines -Weight: 125 kg

electric motor, three-phase motor -Power: 13/17 kW -Speed: 1470/2950 rpm -Shaft: Ø 42 mm -Design: B5 -Protection class: IP 54 -Dimensions: 620/350/H400 mm -Number: 3x motors available Price: per piece -Weight: 130 kg

Replacement motor for geared motor, electric motor, three-phase motor -Speed: 1400 rpm -Power: 2.8 kW -Design: B14 -Brake -Shaft diameter: 20 mm toothed -Protection class: IP 54 -Weight: 35 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Geared motor, electric motor, electric geared motor -Speed: 186 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 44 -Weight: 21 kg

Starter Delko-Remy -Voltage: 12 V -Type: 10479628 -Teeth: 10 -Weight: 11 kg

description: Here we offer a Siemens Simatic Coros OP25 panel. The panel is still packed in its original packaging, unused and in a perfect condition. After delivery / pickup, you have the right to return the panel without giving reasons, within 4 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800 and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as  ...

SARTORIUS QUINTIX 1102 1CFR Precision Balance 1100g / 0.01g In excellent condition For legal metrology, with its follow-up logbook Laboratory Scale Reference: QUINTIX1102-1CFR Weighing capacity: 1100g (1.1kg) Readability: 0.01 g / 10mg Linearity: 0.03 g / 30mg Dimensions of the weighing pan: Ø180mm Calibration Type: Internal (Isocal) Temperature Range (Metric): 10°C to 30°C Dimensions: 360 x 216 x 95mm Weight: 4.7 kg Colour touchscreen with intuitive interface, usable with laboratory gloves Built-in and customizable weighing programs for simplified use in advanced applications isoCal function for automatic internal calibration based on temperature Date of last audit report: 11/2023 Scale tested with 100g/200g/500g/1kg Year of manufacture: 2014

Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.

screw size:45 mm injection shot weight in Polysterol:149 g/PS closing pressure:100 kN

Manufacturer: BAC (Spain) Model: POR-100-12-150 Type: Ball Valve Size: 6" (DN150) Pressure Rating: 150 lbs (ANSI Class 150) Material: • Valve Body: CF8M Stainless Steel (AISI 316 equivalent) • Ball: 316 Stainless Steel • Gasket: PTFE (Teflon) Connection: ANSI Flanged Ends