altendorf f 45 used for sale

Offer here a linear actuator with 30cm stroke and 8cm piston diameter. Ready to use with check valves, flanges, 16mm QuickLocks. It also comes with a plant dismantling and worked without any problems until the expansion. It can be seen in Weyhe near Bremen.

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...

Ferrum can seamer, year of manufacture: 2005, type: F812-1, fitted to beverage can can lids 202. Ferrum Can Seamer, Year: 2005, Type: F812-1, adjusted to beverage cans, can lid 202, hight adjustable, canning line

Ref. -No.: 10370 Manufacturer: FANUC Year of construction: 1997 Type of control: CNC Control: FANUC Series 16-M Storage location: Halberstadt Country of origin: Irland X-Travel: 500 mm Y-Travel: 380 mm Z-Travel: 300 mm Machine length: 1560 mm Machine width: 2060 mm Machine Height: 2218 mm Rotary Table (Lxw): 650 x 380 mm Table Load: 200 kg Max. Tool Weight: 2 kg Max. Tool Length: 120 - 200 mm Max. Tool Diameter: 65 mm Tool change time: 1 s Tool Taper: MAS BT30, MAS P30T-1 (45°) Numbers Of Tools In Magazin: 10 Tool changer: Revolvertyp (Spindel unabhängig vom Revolver) Turning Speed Range - Stepless: 1-15000 mm / min Rapid Traverse X-Axis: 48 m / min Rapid Travel Y-Axis: 48 m / min Rapid Traverse Z-Axis: 48 m / min Weight Of The Machine Ca.: 1,7 t Max spindle speed: 8000 min⁻¹ Positioning accuracy in one direction (1): 0,006 / 300 mm Positioning repeatability (2): +/- 0,002 mm ...

S. No.: 238828

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, directional control valve -Magnetic valve -PN: 2-10 bar -Number: 2x available -Price: per piece -Weight: 0.2 kg/piece

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, directional control valve -Magnetic valve -PN: 2-10 bar -Number: 2x available -Price: per piece -Weight: 0.06 kg/piece

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg

Key data: 500 mm, 400 mm, 330 mm

achine details Stock-No. 1105-03933 Type of machine Machining Center - Vertical Make FANUC-STAMA Type Robodrill T14 ifb Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by arrangement Freight basis EX WORK Technical details x-travel 500 mm y-travel 400 mm Z-Travel 330 mm table surface area 650 x400 mm turning speed range - milling 10000 rpm power capacity - milling spindle 7,5 kW tool taper BT 30 No. of tools in the magazine 14 pieces feed range 1-12000 mm/min rapid motion -longitudinal/cross/vertical 36 m/min total power requirement 10 kW Weight of the machine approx. 2200 kg dimensions of the machine approx. 2000x2400x2600 mm Additional information CNC FANUC 31 i MB 10000 rpm spindle

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Solenoid valve -Type: CPE18-M1H-5J-1/4 -PN: 2-10 bar -Number: 28 valves available -Price: per piece -Weight: 0.1 kg/piece

air conditioner, air conditioning unit -Power: 6.5 kW -Type: AOY24FNBK -Dimensions: 900/365/H645 mm -Weight: 80 kg

Computer, server, operator panel, control unit, keyboard, screen, controller -Manufacturer: FUJITSU -Type: PRIMERGY RX300 -Dimensions: 750/485/H90 mm -Weight: 25 kg

Rack trolleys, paint drying trolleys, compartment trolleys, transport trolleys, shelf trolleys -Total length: 1190 mm -Total depth: 720 mm -Total height: 1800 mm -Weight: 66 kg

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm -Weight: 19 kg

Vertical machining center Chiron FZ08W :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 21M Tool connection: HSK 32 Spindle power: 3,7Kw Number of spindle revolutions: 15000 Number of tools: 12 X Axis Stroke: 300mm Y Axis Stroke: 250mm Z Axis Stroke: 250mm Rapid feeds linear axes X Y Z: 40 40 60m/min Guides: roller Pallet change: yes Pallet size: 550 x 300mm Maximum load allowed: 200Kg Rotopallet: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2600mm Width: 1400mm Height: 2100mm Weight: 2200Kg

Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-70-0090PPV -Piston: Ø 70 mm -Stroke: 90 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 93/93/H295 mm -Weight: 3.5 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 305 mm -Total length extended: 385 mm -End position cushioning: adjustable on both sides -Dimensions: 52/H305 mm -Weight: 2.75 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0140PPV -Piston: Ø 100 mm -Stroke: 140 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 8.5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-40-600-PPV -Piston: Ø 40 mm -Stroke: 600 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 55/55/H785 mm -Weight: 3.45 kg

Shrink packaging FL5545TB L sealer and shrink tunnel Serial: 872 2012, L sealer on conveyor, sealing bars 550mm x 450mm, into shrink tunnel, aperture 400mm x 220mm, variable speed conveyor and adjustable temperature controls, mobile, 3Ph

Paint dosing system from Fluid Solution incl. software

1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004

Key data: 510 mm, 2250 mm, 4 St.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Pneumatic damping: adjustable on both sides -Dimensions: 38/61/H210 mm -Weight: 1.05 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 160 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Total length: 340 mm -Total length extended: 500 mm -Dimensions: 65/65/H340 mm -Weight: 2.25 kg

Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 300 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 522 mm -Total length extended: 822 mm -End position cushioning: adjustable on both sides -Dimensions: 70/64/H522 mm -Weight: 4.65 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture -Dimensions: 910/294/H350 mm -Weight: 115 kg

M. No.: 2067 Working width max. (mm): 800

Condensate drain, filter control valve, switch-on valve, maintenance unit, water separator -Connection: G 1/4 -Number: 9 pieces available -Price: per piece -Dimensions: 50/H120 mm -Weight: 0.37 kg

Input module for valve terminals -Type: VIGE-03-FB-8 -Inputs: 4 -5- pole -PNP -Dimensions: 132/40/H70 mm -Weight: 0.27 kg

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Input module for valve terminals -Type: CP-E16-M8 -16 inputs: 24V DC -Signal status display: via 16 LEDs -CP- functionality -M8: connector -1x: M9 CP connection -PNP/NPN -Protection class: IP 65 -Dimensions: 65/150/H50 mm -Weight: 0.34 kg

Ref. -No.: 10350 Manufacturer: FPT Year of construction: 2012 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Italien X-Travel: 14000 mm Y-Travel: 5000 mm Z-Travel: 1500 mm W-Axis: 1000 mm Numbers Of Tools In Magazin: 24 Drive Capacity - Spindle Motor: 60 kW Rotary table diameter: 3000x3000 mm Rotary table travel V: 2500 mm Rotary table max. Load: 80000 kg swivel angle: 180 ° Further information: +3D M Sensor +CNC controlled angle head: micro

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: ADVC-16-25-APA -Piston diameter: 16 mm -Stroke: 25 mm -Elastic: damping rings -Complete with: proximity switch and screw connection -Weight: 0.17 kg

Swivel drive, pneumatic cylinder, wing drive, swivel module -Type: DMSI - Angle measuring system: integrated -Swivel angle: 0° - 270° -Number: 1x available -Price: per piece -Dimensions: 110/110/H270 mm -Weight: 9 kg

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Type: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Stroke: 80 mm -pneumatic: cushioning -both sides: adjustable -Gliding guide -Weight: 7.34 kg

Propeller mixer Manufacturer: EKATO FLUID (Lörrach) Type: SM 31 Item no.: 99.38466.10 completely in EEx protection Power: 2.6 kW flexibly swiveling speed-controlled, continously variable with control cabinet condition as good as new height pneumatically adjustable on wheeled castors LBH: 1100 x 650 x 1900 mm

Pulse generator, handwheel, CNC control -Manufacturer: Fujitsu Fanuc, Pulse Generator -Type: A860-0200-T021 -Quantity: 2x Pulse Generator available -Price per piece -Dimensions: 122/122/H136 mm /140/120/H120 mm -Weight: 1.1 kg/pc.

Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece

Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece

electric motor -Power: 0.37 kW -Speed: 1500 rpm -Shaft diameter: 14 mm -Design: B3 - Protection class: - -Dimensions: 240/186/H175 mm -Weight: 12 kg

three-phase motor, electric motor -Power: 1.5 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Flange: Ø 160 mm -Protection class: IP 54 -Dimensions: 330/255/H190 mm -Weight: 25 kg